TOP HEAD DRIVE RIGS FOR SALE

 

INGERSOLL RAND TH60 DRILL RIG  (Ref#5158T) 

Manufactured 1999, 825/350 air compressor, 4 x 3 centrifugal mud pump, Mounted on International truck with Cat C15 (rebuilt with 2300 hours), PTO, 340’ of 4-1/2” rod  Price:  $365,000

INGERSOLL RAND T4 DRILL RIG  (Ref#7454T) 

Manufactured 1989, 1000/350 air compressor, no mud pump, Cummins KT19 deck engine (rebuilt with 4000 hours), mounted on Crane Carrier with Cummins L10 engine, 8LL Eaton transmission, all new pumps, well maintained, 2 secondary carousels, many extras, 1000’ of 4-1/2” x 25’ drill pipe (3-1/2 thread) Price:  $295,000

REICHDRILL 625W DRILL RIG  (Ref#4470T) 

Manufactured 1994, 900/350 air compressor, Cat 3406 deck engine, mounted on Ford tandem axle truck with Cummins 8.3 engine, 6 rod carousel, 420’ of 4-1/2” x 20’ (3-1/2 Reg) drill rod (fits on rig), chains and sprockets, hydraulic lines gone through, includes hammer and bit Price:  $275,000

DRILTECH T25KW DRILL RIG  (Ref#8026T) 

Manufactured 2007, Sullair 1000/350 air compressor, Cummins KTA19 deck engine, water pump, mounted on Sterling truck with Cat C12 engine, 77,000 miles, water injection pump, lubricator, 7 rod carousel with 4-1/2” rod, rod box, 22 pieces drill pipe, 8LL transmission, no compressor clutch  Price:  $340,000

SPEEDSTAR 25K  (Ref#13011T) 

Built 1988, 900/300 Sullair compressor, 3 x 4 centrifugal mud pump, mounted on 1998 International Paystar 5000 with 400 Big Cam Cummins engines, standard features, 6 rod carousel, rod box, 4 hydraulic leveling jacks, rig has 30k hydraulics
Approximately 700’ of 4-1/2” x 20’ drill pipe (3-1/2” reg), 6” down the hole hammer,bits
Trailer mounted 1000-1200 gallon mud shaker with 3 cylinder Deutz diesel engine
Price:  $169,500

GEFCO SD300 DRILL RIG  (Ref#9822Tb)

Manufactured 1998, 860/350 Sullair compressor (rebuilt 2022), Centerline duplex piston pump, extra winch for stinger line, single rod loader, 2 injection pumps, foam injection, extra control circuit for mud pickup pump, tandem axle International 2574 truck with 400 hp Cummins diesel engine  Price:  $245,000

DRILLMAX DM450 DRILL RIG  (Ref#1386T)

Built 2023 (took delivery December 2023), approx 1,000 hours, 500/300 air compressor. 4x3x13 centrifugal mud pump, 12,000# main winch, 1,800# secondary winch, 15 rod carousel set up for 3" drill pipe, rod spinner, rod box,  mounted on International 6x4 tandem axle truck with Cummins engine, automatic transmission, chrome wheels, come with 500' Mayhew Jr 3” x 20' drill pipe (new Dec 2023), manufacturer's warranty is valid until Dec 2024  Price:  $875,000

DRILLMAX 350 DRILL RIG  (Ref#3408Ta) 

Manufactured 2005, 300/200 Ingersoll Rand air compressor, (2) 3” diaphragm pumps, Braden hydraulic winch, mounted on 2005 Ford F650 4 x 4 truck with Cat engine, manual transmission, manual brakes, 4 hydraulic leveling jacks, rebuilt rod box, 200’ of 2-3/8 Mayhew Jr drill pipe, many rebuilds, well maintained  Price:  $270,000

INGERSOLL RAND TH60 DRILL RIG  (Ref#11116Ta) 

Manufactured 2004, 1070/350 IR air compressor (new 2021), Cummins engine (rebuilt 2021), new transfer case 2022, mounted on International Paystar tri-drive, set up for 3-1/2” drill rods, located Canada  Price:  $495,000 USD

INGERSOLL RAND T3 DRILL RIG  (Ref#11116Tb) 

Manufactured 1999, 900/350 Doosan air compressor (new 2022), Cat 3406 deck engine (rebuilt May 2022), approx 950 hours on compressor and engine), rotation head completely rebuilt 2024 as well as most hydraulic pumps, mounted on 2005 Kenworth T800 truck (approx 212k miles), with new 565 hp Cummins IXS engine installed with only approx 18,500 miles), 18 speed transmission, located Canada  Price:  $480,000 USD

SCHRAMM T660-H DRILL RIG  (Ref#11116Tc) 

Manufactured 1989, 900/350 GHH air compressor, Cummins 855 450 hp (rebuilt 2019), new proheat deck engine heater in 2022, upgraded hydraulic pumps,  mounted on 2009 Mack Granite GU713 with 485 hp engine, 18 speed, approx 46,000 miles, new injectors, rig can hold 280’ of 4-1/2” drill pipe between lazy susan and rod rack, added helper’s side controls for winch and jib boom,  mast has 30’ travel, Foremost floating sub, spare components: table slips, rebuilt starter for deck engine, new water pump for deck engine, drive couplers for funk box, new upgraded piggyback hydraulic pump for water injection, new Braden winch, new hyd motor for radiator fan, new hyd motor for Cat pump, new hyd rotation motor, located Canada  Price:  $370,000 USD OBO

QUICKDRILL DRILL RIG (Ref#6661T)

Manufactured 1986, 5 x 6 hydraulic driven mud pump (rebuilt), 250/125 air compressor, mounted on International truck with 466 diesel engine, PTO, 10 or 13 speed transmission, hammer oiler, water injection pump, 460’ of 3-1/2” x 20’ drill pipe, rod box, rig holds 300’ of pipe, 10” drill bit, 292,000 miles on truck, (this is the third truck rig has been on), not used since 2022 but starts up occasionally  Price:  $75,000
(photos coming soon)

SPEEDSTAR SS15-III DRILL RIG  (Ref#9337T) 

Manufactured 1977, LeRoi 256-S2 450/250 air compressor, 4 x 4 x 13 centrifugal pump (he uses for drilling), mounted on 1977 GMC 9500 truck with 290 Cummins engine, PTO, rod box, leveling jacks, no carousel, 300’ of 3-1/2” x 20’ flush wall drill pipe, good shape, running rig, handling tools, bits  Price:  $60,000

DUAL ROTARY DRILLING RIG SYSTEM (COMPARABLE TO FOREMOST DR24)  (Ref#4743T)



System consists of Davey Kent tophead (upper drive) and CR26 (Lower drive) mounted on Soilmec R515 track mounted drill rig
Includes:
CR26 LOWER DRIVE: manufactured 2018, can drive casing up to 26”, approx. 1,200 hours of total usage, 5,500# total weight, 180,000# torque, up to 120RPM, 1,400,000# static load
Comes with jaws for lower drive:  6”, 8”, 16”, 20”, 24” and diverter with 16”, 20” and 24” adapters , cyclone
DAVEY KENT DR-14HP UPPER DRIVE (TOPHEAD):  manufactured 2018, 3 motor topdrive, 500# weight, 3 speeds (75RPMs, 37RPMs, 25RPMs), torque ratings:  14,564# torque@25RPMs, 9,709# torque@37RPMs, 4,855# torque@75RPMs
SOILMEC R515 DRILLING RIG:  manufactured 1997, mounted on Cat 330 base with expandable tracks (3,000mm-4,100mm), Cat 3306 TA diesel engine, 137kNm / 101,000# rotary  torque (with original soilmec rotary head), telescoping kelly bar.  All parts are there to convert it back to a piling rig.
The unit weighs 105,000# in transport mode (CR26 lower drive is removed during transport)
Price on request

WALKER-NEER 250-40 DRILL RIG  (Ref#1744T) 

Refurbished 2000, (2) Cat C15 diesel engines (one powers rig, one powers HPU), pipe handling arm, currently reworking tophead  Price:  $170,000

See more top head drive drill rig for sale on our website at: Top Head Specials

If you want further info and photos email, call or contact and we can send additional information and photos
(516) 536 7375 - rigs@sunmachinery.com