Last Updated: 09/17/2024 10:24 AM
BARGES FOR SALE
393' x 105'7" x 26'7" FLAT DECK BARGE (Ref#3225)
Built 2012. 393' x 105'7" x 26'7", light draft 3'4", Loaded draft 20'. GT 8,870, NT 2,661T. Deck load capacity: 20 ton/m2. Ballast tanks: 22pcs:20m3. Ballast pumps: (2) 400 m3/h pumps. Generator set: CAT C4.4. Winches: (2) Anchors / Mooring winches. Deck thickness: 20mm extra heavy deck. Towing brackets: (2) on PS and (2) on SB, in recess at fore deck covered with steel gratings. Canadian Flag. Barge in class with ABS until JAN 2026. Located Northeast Canada. Price: $7,000,000
335’ x 82’ x 60’ FLAT DECK BARGE (Ref#3863)
Mfg. 2007, 1180 ton NT, 3933 ton GT, 2 mooring poles, 4 winches, 4 anchors, side ramp, no crane, Location: Europe Price: € 1,300,000
330’ x 80’ x 19’ FLAT TOP BARGE (Ref#3909)
Mfg 2007, Singapore. 8.065 Tdw - draft 4-1/2 ft empty, 15ft loaded DNV class due since 4 -2022 Deckstrength from 10 /15 upto 22 ts m/2.The barge was previously equipped with a revolving crane and is ideal to reinstate as crane barge. Location: Europe Price: $950,000
300’ x 90’ x 22’ FLAT DECK BARGE (Ref#4004)
Built 1965, steel, partly welded/partly riveted, racked bow and transom stern, 21 compartments, fitted with arrangements for 4 spud poles, in order to hold rock deck needs to be reinforced where ringer crane was not mounted, 3000’ of deck area needs work, 1000 lb/sq ft deck capacity, located East Coast US PRICE: $925,000
300' x 90' x 20' FLAT DECK BARGE (Ref#2569)
Built 1996, DWT 9737, Light Ship 1850 tons, Deck area: 26,995 sq/ft, Deck unit load: 4600lbs / sq ft. Bulkheads: 3 longitudinal, 4 transverse + pump room bulkhead. 20 ballast tanks. Raked on both ends, 2 skegs on stern. John Deere 79Kwh at 1800rpm, Mitsubishi 72Kwh at 1800rpm, (2) ballast pumps: Pumpeteknik 600m3/h, 1 Portable el. driven submersible pump. Anchor winch: Brattvaag/Hagglund hydraulic winch, 18 tons pull / 1000meter wire, 32mm with breaking load 704kN. Smit towing arrangement for main and emergency towing, SWL 100 tons. Located Norway. Price: €1,950,000 EUR
200’ X 40’ X 7’ DECK BARGE (Ref#4075)
Built 2008, 200’ x 40’ x 7’ deck barge, big rub rail down both sides, only used in fresh water, excavator removed, located Midwest USA Price: $1,100,000
(2) 260' x 52' x 12' HOPPER BARGES (Ref#3615)
2 availble. Built 1981, 260’ x 52.5’ x 12’, 1375 GT, Single rake. Double hull, single open hopper. Capacity at 10’: 3,521 ton, capacity at 9’6”: 3,311 ton. No ABS, Requires bottom work, requires approx. $150,000 each barge, 5 hours sailing time to drydock, currently in water, located Mid South East Coast USA. Price: $325,000 each
195’ x 35’ HOPPER BARGES (Ref#4156a) 4 available, built 1975, 1600 ton capacity each, 3’ coming, located Arkansas Price: $280,000 each
Available with (prefers to sell as package):
1400 HP PUSHBOAT (Ref#4156b) Built 1953, 79’ x 26’, Cummins K19 engines, 2 generators, 3 decks, accommodations for 5 persons, galley, shower/head, 3 decks, Sub M compliant, located Arkansas Price: $775,000
250’ x 52.5’ x 12’ HOPPER BARGES (Ref#3912ab)
Two available, Can load up to 10’ draft, 3300 tons, located fresh water, Bulkheads #1, 2, 3 and blow rake bulkhead replaced (on one barge), needs work, price includes delivery to NY Harbor Price: $125,000
UNIQUE 100 CUBIC YARD DUMP BARGE (Ref#3693)
Used in fresh water, 100' x 26' x 7', draft 2' empty, 7' full, 4 pockets on each side to carry dirt, sand, mud or rock, constructed with high nickel steel (lack of corrosion). 10 separate compartments for flotation accessible by manholes. (2) pockets for spuds in center running vertically allowing spud poles.
OPERATION - Releasing the cargo can be quickly released or dumped aside by hitting an arm with a hammer. The release arm allows the chain wound around a rod to unravel allowing the cargo to slide out the side of each pocket's door. The doors are hinged on the top, so the weight of the cargo pushes them out to the side, and then they return to their vertical position after dumping. To prepare them to hold more cargo you wind in the chain by inserting a bar into slots around the chain's rod which has a locking ratchet. Winding in the chain pulls on the door which is kept from releasing by the locking ratchet.
Barge tilts at lower water levels from sitting on the riverbank. Currently set up for carrying cargo that is dumped aside. Each open pocket is 11.8 cu yards, spud tube pockets 11.2 cu yards. Total scow capacity 93.2 cu yards. Located New York State. Price: $110,000
click on drawing to enlarge
72' X 22' TUGBOAT AND 225' X 52' BARGE (Ref#3737)
Tug: 72' x 22' x 11.22', built 1990, built in Holland, 99 GT, 30 NT, accommodations (1) 1 crew, (1) 2 crew , (1) 6 crew, main engines: (2) Deutz SBA 12M 86, speed 5.5 knots, capacities: fuel (2) 16.40 m3, potable water (2) 5.10 m3, ballast (1) 7 m3.
Container barge: 225' x 52' x 14.82', built 199, built in Argentina, max draft 10.86', min draft 5.9', capacities: fel (2) 42.34 m3, potable water (2) 10.78 m3, ballast (2) 121.86 m3, Teux: 140, holds 4, cargo 1900 tons.
Located South America
Price: $1,400,000
196' x 48' x 15' FLAT DECK BARGE (Ref#2734)
Built 1940s to 1950s, Converted from LCT barge. Raked both ends. Wing Tanks, double bottom. Recently hauled out, replaced bottom plating and new bottom paint, located West Coast. Price: $640,000
195’ x 35’ FLAT DECK BARGES WITH BIN WALLS (Ref#4168a)
(4) available, 1600 ton, used as rock barges, built approx. 1975, located Midwest US Price: $250,000 each Price for all 4 barges: $850,000
185’ X 45’ X 12’ KEYWAY BARGE (Ref#4044)
Built 1985, keyway filled in, raked one end, approx. 3000 ton, just came off a job in August 2023, although paint is peeling steel is good, tanks are good, located Louisiana Price: $675,000
180’ X 50’ BARGE WITH 4 LEVEL DECKHOUSE (Ref#4183)
Built 1974, 180’ x 50’ x 10.6’, 4 level deckhouse extends full width and breadth of the vessel, solid bulwarks on each level, 40,000 SQ FT cabin space, barge is non propelled. (2) 8V71 Detroit diesel engines powers 150 kw AC generator and (1) 371 Detroit diesel drives 50 kw AV generator. Electrically driven bilge and fire pumps, 1000 gal fuel oil tank. Former COI for river service for 900 persons. Level #1 (main deck) fully enclosed with mooring and anchor handling area forward, deckhouse with wide side deck, large open aft deck with (2) engine casing and ramp centerline aft for portable gangway. Level#2 (upper level), former seating area with windows, escape trunk from mooring and anchor handling space below. House structure running to stern, at the amidships area (port and starboard) wide side decks are the main passenger access systems with a section of the deck which is hinged and can be raised and lowered to the main deck. Level #3 (observation deck) is open area with awning structure forward, house structure with A/C, wide side decks outside of the house. Level #4 (bridge deck), only non-full length deck starting 75’ from bow and running to amid ship, fitted with faux pilothouse and stack structure. Barge was used as a floating hospital. It was drydocked in 2010 and received commercial blast and 3 coat paint system, outfitted with 75 new 23# zinc anodes, new sea and overboard valves, plate and frame renewal in generator room space, given USCG dry dock certificate. Vessel has remained in fresh water since drydock. Located New York Price: $550,000
FLAT DECK BARGE WITH BIN WALLS (Ref#1760)
Built 1979, COI and ABS Loadline. 180' x 50' x 12', 3' minimum draft. 905 GT, 905 NT. ITC GRT 949, ITC NRT 284. 4' high steel fence with (2) side openings. Usable deck: 160' x 46'. Cargo capacity: 1900 ton. Deck loading: 1700 psf. Deck type: Reinforced steel and fiber concrete. Powered ramp: 18' x 35', max loading 140,000 lbs. 10 watertight compartments, (1) 100 gal diesel fuel tank, (1) 50 gal hydraulic oil reservoir, raked bow and stern, flat bottom, Good condition. Survey, gauging report, stability letter, displacement table, ABS Loadline renewal, and load line certificate available. This vessel is en route to Seattle Washington from the South Pacific. It could be diverted to the Caribbean if a decision is made quickly. Will arrive in Seattle in May of 2019. Charter Price: $2,000 per day
170' X 37.4' X 8.2' UNUSED FLAT DECK BARGE (Ref#3687)
Two available, built 2017 and 2018, located Europe, 52m (170.6') x 11.4m (37.4') x 2.5m (8.2') – draft max 1.93m (6.33'), deadweight 770 tons, GT 374, NT 112, 12 tanks but no ballast system, bottom structure has been additionally strengthened for loading and unloading aground, suitable for tidal areas, able to do roro work when falling dry, integrated spud pole construction, Class LR (deepsea, coastal waters, harbours and inland waters), load 10 ts/m2, located Europe
Price: €1.4 Million Euros
Ramps and spud poles available at extra cost
165’ BARGE AND TUG PACKAGE (Ref#4035)
165’ x 45’ DECK BARGE WITH RAMP 165’ X 45’ X 9.5’ depth, 3.5’ draft, 20’ x 45’ stern mounted ramp, 1000 ton capacity, 6” concrete wear deck, welded steel flat deck freight barge (converted from tank barge), raked ends, 609 NT, 609 GT, Skagit single drum anchor winch, (2) Gearmatic 25,000# hydraulic able winches for loading ramp, 671 Detroit driving Spencer 35 gpm hydraulic pump, 50 gal fuel tank, not ABS classed, does not carry a loadline certificate or current COI.
850 HP TWIN SCREW TUG Built 1966, 65’ x 21’ x 10’, main engine 850 hp Cat, 88” x 109” SS propellers, 89” kort nozzles, Foss bow winch, 1500’ 2” tow wire on tow winch, 16,000 gal fuel capacity #2 diesel, 3800 gal potable water capacity, 87 GRT, 57 NRT, communication and navigation equipment, Sub M
Located Alaska, currently working
Price for barge and tug: $775,000
Price for barge only: $525,000
164.9' X 50' X 12.1' BARGE (Ref#1754)
731 GT, 731 NT, (2) Clyde 7 triple drum winches with central control room, (4) 10,000# anchors, West Coast USA Price with gear: $250,000 Price without winches/spuds: $525,000
160’ x 32’ FLAT DECK BARGE (Ref#4168b) With bin walls, located Midwest US Price on Request
150’ x 60’ x 9’ CRANE BARGE (Ref#3937)
Available for charter, located Kentucky Charter Price: $850 per day for 3 months, $750 per day for over 9 months
150’ X 54’ X 12’ CONCRETE PRODUCTION BARGE (Ref#3958a)
Built 1970’s, 5’ light draft, made with rebar, held water for ballast (not used for petroleum), 2 decks: top deck 126 x 54, top frame dimensions 58’ x 45’, 16’ air gap from first deck to top deck, top deck supported by concrete vertical columns (cold be removed yielding a flat deck barge), various tanks and hatches, good condition, box ends (which creates a slow tow), replacement value in excess of $2M, located Southeast Louisiana Price: $250,000
141' x 42' x 11' DECK BARGE WITH RO/RO RAMP (Ref#3556)
Built 1967. 141.4' x 42' x 11'. GT 141, NT 141. Clear deck space: 4940 sqft. Hydraulic engine: Perkins. Located West Coast USA. Price: $950,000
140' x 35' x 10' DECK BARGE (Ref#1580)
140' x 35' x 10', ex ocean oil barge, rake stern and bow Price: $195,000
138' x 40' x 12' SPUD BARGE (Ref#3522)
Previously a dredge, rake and notch on bow, (2) 24" spud wells, (2) 60' x 24" spuds, 30 x 30 deck house, heavy built (generally 1/2" steel), six water tight comparts, located California Price: $345,000
137' X 32' X 5.6' BARGE (Ref#1827c)
600 ton capacity, located Colombia Available for Charter: $32,000 per month
135' x 40' x 12' SPUD BARGE (Ref#3057)
Built 1945, (2) splud 36" x 60', located California Price: $300,000
134’ x 50’ x 12’ FLAT DECK BARGE (Ref#4093)
(2) 30” spud wells starboard, no spuds, located New York Price: $475,000
130' x 53' x 12' SPUD BARGE (Ref#3490)
Built 1970s. Converted from tank barge. Bow raked. (2) 60' x 24" spuds with internal spud wells. Located Missouri. No crane. Price: $475,000
120' X 52' X 8' SPUD BARGE (Ref#3664)
Deck capacity 750 #/sq ft, (4) 24” x 24” spud wells, (2) 20” x 20” 70’ spuds, hydraulically operated cable winch spud system with Cummins 6 cylinder diesel engine, coated inside and out, pollution rails, heavy built construction, (crane in photo not included), located Alabama Price: $1,200,000
120’ x 45’ x 6.7’ FLAT DECK BARGE (Ref#4040b)
Built 1975, 3 square spud wells, raked bow, square stern, needs work, located Florida Price: $420,000
120’ X 40’ X 7' SPUD BARGE (Ref#3761b)
(crane removed)
120' x 40' x 5'5" FLAT DECK BARGE (Ref#1456)
120' x 40' x 5'5" H, 1' draft, Built 1970, 557 NRT, double rake style with bare steel deck, 1975 1000# HIAB Folo 245 Hyd Knuckle Boom Crane, good condition, located Alaska Price: $130,000
120’ x 30’ x 6’ DOUBLE RAKE BARGE (Ref#3781)
New bottom 2005, located shipyard in Alabama Price: $300,000
120’ x 30’ x 7’ SHALLOW DRAFT WORK SPUD BARGE (Ref#4121)
Built 2012, 3’ normal draft, 70’ X 30’ deck area, 190 GT, 15,000 gal water capacity, 9,500 gal fuel capacity, 60 gal lube oil capacity, passenger and crew accommodations for 20 with (4) 4-bunk state room and (1) 4 bunk company room, communication and navigation equipment, 40 Ton Natulatis Hydraulic crane with 60’ boom, (2) 40kw Isuzu generators, not a self propelled barge, located Louisiana Price: $1,000,000
120' x 30' x 7' FLAT DECK BARGE (Ref#2715) Built 2006. Rake both ends., 4’ bin walls, located Louisiana. Price: $420,000
120’ x 30’ FLAT DECK BARGE (Re#4168c) Located Midwest US Price on Request
118' X 47' X 7.9' FLAT DECK BARGE (Ref#1827A)
850 ton, located Columbia Available for Charter: $29,000 per month
110’ x 45’ x 6’ FLAT DECK BARGE (Ref#4040a)
Built 1970, 4 spud wells for square spuds 14-16”, 50% of barge has concrete wear deck, stanchions in place for bin walls, starboard bow corner requires repair (including into the spud well), located Florida Price: $370,000
110’ x 26’ FLAT DECK BARGE (Ref#4168d) Located Midwest US Price on Request
100’ x 35’ x 8’ (Ref#2867) Drydocked 2019, blasted and painted, knuckles redone, ½” plate, up 4’ on sides, (2) 30” interior spud well 1 on each end, double rake, located Mississippi Price: $135,000
110’ X 56’ X 13’ FLAT DECK BARGE (Ref#3983)
Price: $690,000
105’ x 28’ x 8’ COMBINATION TANK/DECK BARGE (Ref#3836a)
300 ton capacity, 75,000 gallon capacity (4 cargo tanks), double hull, load line exempt, concrete wear deck, located West Coat Price: $325,000
100’ x 30’ x 7’ SPUD BARGE WITH OFFICE (Ref#3801)
Built 2000, 20’ x 60’ office (steel) with 2 beths, was a restaurant, (2) 15” x 40’ spuds, 10’ deck on side lower than barge for entering, in fresh water in Louisiana Price: $225,000
86’ x 28’ x 6’ SPUD BARGE (Ref#4016)
Raked one end, 2 spuds powered by Detroit diesel in house, approx. capacity 200 ton, 46 GT. Reworked in shipyard for COI, sides and bottom in good condition. Barge was no longer needed so they never applied for COI. Located Louisiana Price: $205,000
95’ x 24’ SPLIT HOPPER SELF-PROPELLED BARGE (Ref#3929)
Built 2006 (Spain), 270 MTNS DWT on 9.8’ draft, 190 GT, 261 cubic yard, 59’ x 18’ hold capacity, split hopper opening 8.2’ (free fall hopper system), (2) Cummins diesel engines (180 hp each), (2) hydraulic pack Sauer Danfoss ERRL-147 (1 for splitter and 1 for bow thruster and other services), bow thruster, accommodation 4 berths and galley, classed Spanish authority for 200 miles from coast, located Canary Island Price: €800,000 Euros
90' x 28' x 5.6' SPUD BARGE (Ref#2838)
Built 1980. GT 206. 90' x 28' x 5.6'. Link Belt HSP25 18-ton hydraulic crane. Triplex PE5 pump with 3,750 PSI. Crew quarters for six men. Located Louisiana. Price: $265,000
LIFTBOAT JACK UP VESSEL (Ref#1127)
Manufactured 1983, 79'L x 59'W x 8'H, open space 2800 sq ft, 192 GT, 150 NT, main deck carco 105 (kips). (4) 148' x 42" legs (5/8" wall thickness braced), 22'L x 12'W x 24" depth pads (raked all sides), 70 ton crane with 80' boom, 10 ton aux crane with 50' boom. Main engines: (2) 12V71N GM (680SHP), 3:1:1 reduction gear (twin disc ratio), 8 knots. (2) Deep Well Pumps, (2) electric 400a welding machines, satelilite phone with internet, (2) 80kw Delco generators w/(2) 6V71N GM engines, 7500 gal fuel, 9800 gal potable water, navigation equipment, 28 berths (including boat crew), central A/C and heaters, Lounge w/Satellite TV, 4 heads, galley seats 16, laundry. Maximum working depth 90' (w/25' air gap), Max sea conditions: 4' hard, 5' soft bottom, 8-10 fpm speed. Working in USA Price: $5,700,000
75’ x 26’ x 4’ FLAT DECK SPUD BARGE (Ref#4136b)
2 spuds, Detroit diesel to power spuds, located Midwest USA (excavator availble at extra cost) Price: $195,000
60.5’ x 40.5’ x 12’ CONCRETE PRODUCTION BARGE (Ref#3958b)
Storage capacity of 4000 bbls, built of all concrete construction, sides are approx. 6” thick, one single bitt is located on each corner, located Southeast Louisiana Price: $125,000
56' x 8'6" SELF-PROPELLED BARGE WITH TRACTOR AND TRAILER (Ref#3565)
56'x 8'6" freshwater self-propelled barge, less than 200 hours. Has been used to haul 36,000lbs. UltraJet 375 jet drives with CAT diesel engines. Includes 1986 Freightliner tractor and 95 Trail Eze 40,000lb trailer, sliding axle. Located Rocky Mountains, USA. Price: $290,000
40' x 38' x 3.9' JACKUP BARGE (Ref#3613)
Built 2009. Made up of (4) Ravestein 40' x 8' x 4' sections. Legs (4) 59' x 20". Deck load capacity: 5tons/sq.meter. Jacking system: Dual hydraulic cylinders. Perkins hydraulic power pack. Modular construction for transportation. Mobilization for trucking: (2) 45' flatbed trailers, (1) 60' trombone trailer, 50 ton crane. Located Panama. Price: $425,000
18 METER / 59' JACK UP BARGE (Ref#1519)
Built 1999, rebuilt 2008, 15 Ton capacity, Modular form can be transported in two truckloads. Located Europe Price: 280,000 EUR
50’ X 20’ X 4’ FLAT DECK SPUD BARGE WITH KOEHRING 7 TON CRANE AND BOAT (Ref#4091)
50’ x 20’ x 4’ Flat deck barge with (2) spuds (30’ and 25’), hand winch for spuds
2005 Koehring 7-ton crane with Detroit engine, ¾ yard bucket
33’ x 10’ x 5’ steel boat with Detroit 471 engine, (2) 400 gal fuel tanks, controls, pilot house
Located Michigan
Package Price: $48,000
40' x 9.9' SELF PROPELLED WORK BARGE (Ref#3570)
Built 1998, Reworked 2017 into tri-pontoon work barge. 40' x 9.9' x 15", with 30' front deck. All structures removed and replaced with 1/4 c channel 3/8 diamond plate deck. Twin 25 gallon removable fuel tanks, Twin 4-stoke 150 Honda's with 1200, and 1400 hrs. Has pad eyes for picking. Outer pontoons have pipes welded along bottoms for beaching and strength. Includes 2017' 40' gooseneck trailer, custom made, raised neck 1ft , low boy triple axle. Located Great Lakes. Price: $100,000
JACK UP BARGE (Road Transportable) (Ref#683) Year of Build 2007 / 2008. Length: 12.2 Meters (40') , Beam: 10 Meters (32.8'), Depth: 1.2 Meters (3.9') , Max Load Capacity: 22 Tons, Deck Load: 4 Tons / M2, Jacking System: 8x Hydraulic Rams, Hull Construction: Steel Pontoons, Leg Length: 12m – 18m, Moonpool: 1 x 300mm, Unit is comprised of 4 pontoons, which when combined offer a barge of 10m x 12m. Each of the individual pontoons are equipped with container style corners which allow them to be stacked for transport with twist locks. Price: €575,000 EURO
SELF-PROPELLED AMPHIBIOUS BARGE (Ref#934e)
Undercarriage weight 125,000#, 3 section deck, 50,000# / square foot capacity, cargo weight 100,000#, pontoon 6'H x 10' x 30' (eight bulkhead compartments), 4 strains of heavy duty 5" track chain per pontoon, high torque and final drives, powered by CAT C-15 ATAAC diesel engine, crane A2 15 ton, retractable boom.
PRICE: $800,000
36’ X 10’ SELF-PROPELLED MATERIALS BARGE (Ref#3873)
225 hp Mercury engine, steering wheel, bilge pump, includes 3 axle trailer with 2-6/15 ball hook, 2 spare tires, good condition, ready for use, located Western Louisiana Price: $14,500
SECTIONAL BARGES FOR CHARTER (Ref#3942) – located Kentucky
40’ x 10’ x 7’ (34) Price for minimum 6-month charter $110 per day
20’ x 10’ x 7’ (16) Price for minimum 6-month charter $90 per day
10’ x 10’ rake (16) Price for minimum 6-month charter $55 per day
S70 Spudwell 24” round (4) Price for minimum 6-month charter $30 per day
Spud 24” round 40’ (2) Price for minimum 6-month charter $25 per day
Hydraulic spud winch (2) Price for minimum 6-month charter $50 per day
Brackets Price for minimum 6-month charter $15 per day
Deck cleats (6) Price for minimum 6-month charter $5 per day
77’ x 21.5’ X 5' SECTIONAL BARGE WITH RAMP (Ref#4001)
(16) sections 21’4” x 5’ wide, bolts together from top, hard coat painted with heavy duty US Army paint (good for 25 years), clean condition, ready for use, located Louisiana Price: $110,000
(2) 48’ x 12’ x 4’ BARGES (Ref#4112)
With (2) spuds, one raked end Price for quick sale Price: $90,000 (this price is valid until February 5, 2024)
40’ x 10’8” TRUCKABLE BARGE (Ref#3993)
(two paired up in photo)
4’8” deep, weight 23,500 lbs, outside shell with two internal bulkhead, ¼” plate pins together with 2” solid pins, four pad eyes on each barge with two pinning spots, frame work consists of 6” channel on deck with 5” channel on bottom and 2” x 3” x ¼” diagonals. Bottom longs and deck longs are 2” x 3” x ¼” angle. Stern 2” x 3” x ¼” angle with 5” channel supports uprights. Two hatch covers on deck with a hatch door through the rake bulkhead. Epoxy one coat on inside and two coats on outside, six anoids on each barge, four d rings for lifting purposes while empty. Price: $70,000 each
(4) 30’ X 11’ X 4’ SECTIONAL STEEL BARGES (Ref#4138)
Pinned and bolted together to make 60’ x 22’, would be ideal to be used as a support barge, pile driving barge or dredge barge. It would not be economic to take apart and move from job to job. Could be transported on 4 trucks. Currently working. Price, in water: $45,000
40’ X 10’ X 5’ SECTIONAL BARGES (Ref#4180)
(PHOTOS OF PREVIOUS BUILDS)
New Build, terms 50% deposit with order, completion time 4-6 weeks, Canada Price: $36,000 USD each
12” x 12” spud well $6,000 USD each, 12” x 12” spuds $130 USD per foot
41' X 10' X 5' SECTIONAL BARGES (ref#1737b)
Shugart type, 27,000 lbs each (one per truck load), built 2010-2012, located Midwest Price: $36,000 each Rental cost: $1,500 per month
(3) SHUGART 40 X 10 X 5 SECTIONAL BARGES (Ref#4127_barges)
1993, Pinnable, spud wells, located East Coast US Price: $37,500
(3) 40' x 10' x 5' SHUGART STYLE SECTIONAL BARGES (Ref#987) New build. Price: $35,000 each
40' x 10' x 5' SECTIONAL BARGE (Ref#1904) Shugart style, one year old, in water for one year, sandblasted, painted, excellent condition, located Illinois Price: $33,500
(2) 40’ x 16’ x 4’ SECTIONAL BARGES (Ref#3634b) Like new - used once Price: $100,000
SECTIONAL BARGES (Ref#2632) (6) Available. 40' x 12' x 4-1/2'. (4) pin-together. 3 spud wells (spuds extra). Located Arkansas. Price: $180,000 for the package
FLEXIFLOAT H50 SECTIONAL BARGES (Ref#4129)
5 available 7.5’ x 30’, rounded ends, (2) 15” spud wells welded on, spuds (2) 35’ x 13”, (2) 20’ x 13”, (five barges configure to 37.5’ x 30’) Price: $100,000
19’ x 7’ x 3’ FLEXIFLOAT BARGES (Ref#4159)
8 available in the water and must be removed at buyers expense), 2 have small holes otherwise in relatively good shape, located Georgia (100 miles north of Jacksonville, FL) Bargain Price for all 8 barges: $45,000
(6) SHUGART STYLE 20' x 8' x 4' SECTIONAL BARGE PACKAGE (Ref#3594)
New, unused. 20' x 8' x 4', 8,000lbs each. Includes (2) 9" spud wells. Located Eastern Canada. PACKAGE PRICE: $120,000
30' X 10' X 3' SECTIONAL BARGES (Ref#1737a)
Shugart type, 14,000# each (3 per load), located Midwest USA Cost: $950 per month
25’ x 10’ x 4’ MUD BARGE (Ref#4089a)
Built 2013, inside dims 23’ x 8’ x 3.5’, good shape, 4 compartments for floatation, located Wisconsin Price: $35,000
MARSH BUGGY (Ref#934f)
.JPG)
5 x 5 x 28CR, hydraulic amphibious marsh undercarriage with Cat 320D standard reach 31', D Model Price: $285,000
MARSH BUGGY (Ref#934) 5 x 5 x 30, built 2000, 8000 hours, Model 325 Make B, standard reach 34' Price: $250,000
Let us know if you have any vessels, barges, dredges or related equipment for sale.
Keep us in your files for any equipment that may become available in the future.