Last Updated: 09/26/2024 3:05 PM
Truck, Carrier or Trailer Mounted
Ingersoll Rand / Atlas Copco
RD20 RD10 T4 T3 DIAMOND BACK DB40 TRUCM TH100 TH75 TH60 TH55 TH50
ATLAS COPCO RD20
ATLAS COPCO RD20-III DRILL RIG PACKAGE (Ref#1710T)
2008 RD20III Tridem 5-axle Carrier with Air Conditioning, HR2.5 1250/350 Compressor with Disconnect Cummins Engine, 120,000 Hook Load, 30,000 lb Pull-down, Range 3 Tower, Original 1100 hrs.
6300 ft of 30-ft L IR/Star Iron Drill Pipe 2 7/8 IF Conn. with 2 Pipe Trailers, T/A with Tugger Winches (Hyd) Oilfield Bumpers on back and Oilfield Pickup Throat
Rig Mat Substructure 50-ft L x 5-ft H with Folding Catwalks and Blouie Line Attach. Hookup 8-ft 6-in with Transport Width 14-ft W Folded Out For Working, Transport Trailer and Ramp is 40-ft Oilfield T/A Trailer with Rolling Tail Board Roller, Side Rails on Ramp
Air Package/Fuel Combo T/A 40-ft Trailer, with IR 1170/350 Air Compressor Mounted With 3XXX Hrs (Original), Hurricane Booster 2500 CFM/1000 PSI Mtd, with Cat Engine, and 3500-Gallon Fuel Reservoir with Transfer Pump and Plumbing—All Mounted as 1 Unit
Mud Pump Trailer with Gardner Denver FXZ-172 mud pump
Doghouse/Tool Unit T/A 40-ft Trailer, Totally Equipped with Tooling, Electric Heat, Welder, Generator Diesel Powered (20KW) All Necessary Tooling, Geolograph Pin Recorder, Oilfield Bumper on Back
2006 CAT D6R Series III XL Dozer 10 ½ Semi U Blade with Forestry Package, Winch with Fairlead-Rollers, 2100 Hrs Original
2008 PITTS 35-Ton Lowboy with Folding Ramps T/A
1996 MACK RD690 T/A Vacuum Truck (65 BDL) with Oilfield Bumpers Front & Back
1997 MACk RD690 Dickirson Winch Tractor T/A Hydraulic Winch with In-frame Tail Roller, Oilfield Bumper on Front with Pull D Ring on Back, MACK 350 Eng. 7-Speed Trans. 44 Mack Rears
1999 INTL T/A with Gear-driven Winch and In-frame Tail Roller & Headache Rack, Front Bumper Oilfield 460 Cummins/15-Speed Transmission. 46K Rears on Hend. Walking Beams
2007 MACK Granite with Dickirson Hyd Winch & Tail-Roller Bed Assembly, Oilfield Bumper on Front, 427 MACK Engine with 8LL TRAS, 44 Rears
Package 1 Includes All tooling to Drill 6-inch, 8-in, 12-in, and 17-in, Stabilizer Collars, Crossovers, String Floats, Baskets, Bushings for Table with Tongs, J-Wrenches, Chain Tongs
All Tooling to Handle Casings 4 ½-inch, 7-inch, 9 5/8-inch, 13 3/8-inch, Range-3 Configuration, Elevators (Watson Style) Wishbone Pinned, Clam Shale, Slips, Bushings, and Baskets
Washington Rotating Air Bowl with Lubricator, All Flanges for 7-inch, 9 5/8-inch 13 3/8-inch, 16 Bolt, 7-inch Hammer Union Conn., 10-inch Dorland BOP, Annualer with Kill Ports 2-in
Frac Tank 500-BBL S/A
Package Price: $2,750,000
ATLAS COPCO RD20 III DRILL RIG (Ref#560Ta) Manufactured 2007, 1250/350 IR air compressor, Cat C27 diesel deck engine (only 50 hours since new engine replaced) , 30,000# pulldown, 120,000# pullback, mounted on 5 axle Crane Carrier with Cat C13 diesel engine Price: $545,000
INGERSOLL RAND RD20 RANGE 3 DRILL RIG PACKAGE (Ref#9789T) Manufactured 2006, 1250/350 HR 2.5 on board air compressor, Cummins QSK19 (755 hp) deck engine, 120,000# pullback, double motor spur gear rotary head, mounted on Crane Carrier with Cat C13 (380 hp) with 9,362 miles, 4500’ drill pipe Package Price: $735,000
INGERSOLL RAND RD20 II DRILLING RIG (Ref#9932Ta) Manufactured 2001, 1250/350 air compressor, Cummins QSK19 diesel deck engine, Bean mist pump, cooler, mounted on 4 axle Crane Carrier with Cummins N11 diesel engine, Fuller 8 speed transmission Price: $395,000
INGERSOLL RAND RD20 (Ref#4831T) Manufactured 2000, 1250/350 air compressor, mounted on Crane Carrier with Cummins engine, extended mast, 6000’ drill pipe, stacked one year Price: $485,000
INGERSOLL RAND RD10 DRILL RIG PACKAGE – RANGE II CAPABLE (Ref#11493R) Manufactured 1984, 1050/350 IR screw compressor, Detroit 12V92 (630 hp) engine replaced new in 2011), double reduction spur gear head (86,400 in/lb torque), 70,000# pullback, mounted on 1984 Pettibone carrier with Cat 3208 engine.
Complete with the following accessories:
3,200’ of 4-1/2” x 25’ drill pipe (1200’ new)
Gardner Denver FY7 triplex pump p/b Detroit 8V92 diesel engine, skid mounted
Substructure with ramps
Doghouse on 4 axle trailer (50’ length)
50 cubic meter mud tank and shale shaker
Misc items including (2) stabilizer, 6” Mission hammer with 6” bit, (2) Chugger water pumps, (2) spare pistons for mud pump, (4) 25’ hoses for mud pump, all necessary handling tools
PACKAGE PRICE: $195,000
INGERSOLL RAND TH100 DRILL RIG PACKAGE (Ref#4218T) 2000’ depth rating, Range III,
Ingersoll Rand TH100 drill rig, Cat C15 (475 hp) engine, 60,000 lb pullback, 2 motor spur gear top head, 16” table opening, KB to ground 14.8’ with sub and 4.1’ no sub, 39’ max casing length.
Oilwell A600-PT triplex mud pump p/b Detroit Series 60 w/6 speed transmission, 8” stroke
3 compartment mud tanks w/Mission Magnum 6 x 5 x 11 pump, Linear motion shale shaker3
Accumulator 6 bottles (60 gal) with 2 backup bottles, 4 station, 200 gal tank, 3000 psi
225kw Isuzu powered New Age Stamford generator, 208/460v, 225kw continuous 3-phase
100 hp boiler
Substructure: 1 piece hydraulic ramp w/beaver tails, pipe handler, 8’ floor height
Water tank, doghouse, Range II hydraulic pipe tub, Range II drill pipe, Range II drill collars
Package Price: $3,650,000
COPCO/INGERSOLL RAND T4 (Ref#10189Tc) Manufactured 2012, 1250/350 IR HR2.5, approx. 4,000 hours, Cummins QSK19 (750HP) diesel deck engine, 50,000lbs pullback with option to make it 70,000 lbs Pullback, spur gear tophead, Mounted on 8x4 CCC with Cummins ISM (370 HP) diesel engine Price: $525,000
ATLAS COPCO T4 (Ref#10189Tb) Year 2010, 1250/350 IR HR2.5, approx. 4,000 hours, Cummins QSK19 (750HP) diesel deck engine, 50,000lbs pullback, spur gear tophead, Mounted on 8x4 CCC with Cummins ISM (370 HP) diesel engine Price: $490,000
ATLAS COPCO/INGERSOLL RAND T4 DRILL RIG (Ref#10189Ta) Year 2006, 1250/350 IR HR2.5, approx. 4,000 hours, Cummins QSK19 (750HP) diesel deck engine, 50,000lbs pullback, spur gear tophead, Mounted on 8x4 CCC with Cummins ISM (370 HP) diesel engine Price: $450,000
INGERSOLL RAND T4BH (Ref#15323T) Manufactured 2002, 1070 cfm air compressor, rebuilt Cummins deck engine, angle capable to 30 degree, mounted on Crane Carrier with Cat C10 engine, no dust collector Price: $345,000
INGERSOLL RAND T4 DRILL RIG (Ref#7454T) Manufactured 1989, 1000/350 air compressor, no mud pump, Cummins KT19 deck engine (rebuilt with 4000 hours), mounted on Crane Carrier with Cummins L10 engine, 8LL Eaton transmission, all new pumps, well maintained, 2 secondary carousels, many extras, 1000’ of 4-1/2” x 25’ drill pipe (3-1/2 thread) Price: $295,000
INGERSOLL RAND T4W (Ref#821T) 1000/300 air compressor, 12V92 Detroit engine, updated to 50,000# pullback, line oiler, water injection, mounted on Crane Carrier with 501 gas engine, 3 hyd leveling jacks Price: $165,000
INGERSOLL RAND T4LD (Ref#7961T) Manufactured 1988, 900/350 Ingersoll Rand over under compressor, 70,000# pullback, Cummins KTA19 deck engine, freefall, diesel fired pre-heater, mounted on Pettibone carrier (2 axle in front, 2 axles in rear), with 671 Detroit Turbo engine, Jake brake,
Auxillary compressor: Sullair 1150/350 powered by Cat C15 mounted on lowboy trailer
1988 Mack Water Truck, 1950 gallon round tank, Mack 350 tandem axle
Pipe trailer with 1825’ nearly new 4-1/2” x 25’ (2-7/8 IF) steel
Pipe truck – 1993 Western Star with 2000’ of 4-1/2” x 25’ (75% new)
1986 Mack Winch Tractor, 60,000# winch, rolling tail board, 350 Mack diesel
43’ long x 4’ high substrucutre with 35’ float trailer
32’ float trailer with mud boat
(2) 12” hammers (Numa and IR 120), 17” hammer bit, 12-1/4” carbide bit, 12” Numa hammer bit, floating sub
10-5/8” x 10’ stabilizer, 11-1/4” x 13’ stabilizer with 12-1/4” roller bit
7-3/4” x 15’ stabilizer with 8” Mincon hammer
Center Rock 8” hammer, 4 extra bits 8-1/2” – 8-7/8”, 2 new 8” diamond bit6” IR QLS60 hammer
2 extra hammer, extra bits, miscellaneous tools, stabilizer bushings, 1 large Petol, 3 smaller Petol, (2) 7-1/4” BOPs
Miscellaneous fittings and tools
Package Price: $450,000
INGERSOLL RAND T4W (Ref#12287T) Manufactured 1981, 1050/750 air compressor, 5 x 6 Gardner Denver mud pump, Detroit Twin Turbo deck engine, mounted on Crane Carrier, 1000’ drill pipe, spare parts, portable pit, extra tooling Price: $310,000
INGERSOLL RAND T4 (Ref#8828R) Manufactured 1977, Big Cam Cummins deck engine, 70000# pullback, mounted on CCC with 501 gas engine, worm gear head, 750/150 air compressor, 7 rod carousel, no pie rack or rod box, 1 winch, line oiler, water injection, 1 front & 2 rear leveling jacks Price: 120,000
Available with the following:
1986 INTERNATIONAL WATER TRUCK (Ref#8828RB) 2000 gallon water tank, 350 Cummins engine, 250 gallon fuel tank, crane, toolboxes Price: $45,000
(Ref#8828RC) 1000’ of 4 ½” x 25’ pipe, (1) 8” IR 380 hammer, (2) 6” IR360 hammers, 2 stabilizers, etc
Price on request
INGERSOLL RAND T4 (Ref#1684T) Manufactured 1974, was damaged and is being repaired Price: $90,000
INGERSOLL RAND T3W DRILL RIG (Ref#3363T) Manufactured 2014, 1070/350 IR air compressor, approx. 3,300 original hours as of August 1, 2024, Cummins QSK15 deck engine, 40,000# pullback, hydraulic tensioning system, 25 gpm Bean water pump, mounted on 2015 International 7600 6x4 tandem axle truck with Maxxforce engine Price: $860,000
INGERSOLL RAND T3W DRILL RIG (Ref#4424T) Rig manufactured 2005 and rebuilt and not used since, extended derrick, 900/350 air compressor, Cat 3406 deck engine (mechanical), mounted on 2023 International truck, with only 600 miles, Price: $965,000
INGERSOLL RAND T3W DRILL RIG (Ref#7019T) Manufactured 2005, only 2,000 original hours, 1070/350 IR air compressor with only 900 original hours, Cat C15 (565hp) deck engine, extended mast, 1015 Weldco casing hammer, hammer oiler, water injection, hydraulic driven welder, 7 rod carousel set up for 4.5”x20’ drill pipe, rod spinner, mounted on 2005 International Paystar with Cat C15 engine, all new tires Jan 2024, 300’ drill pipe, rig is in great condition and stored indoors most of the time Price: $785,000
INGERSOLL RAND T3W DRILL RIG (Ref#5612T) Manufactured 2004, 1070/350 IR HR2.5 air compressor (only 1,800 hours since new unit installed), Cat C15 (600 HP) diesel deck engine (only 1,800 hours since factory remanned Cat engine installed), 6 rod carousel set up for 4.5” x 20’ drill pipe, rod box, standard pullback, 3rd hydraulic pump to run mud pump, mounted on International tandem axle truck with less than 10,000 miles Price: $745,000USD
INGERSOLL RAND T3 DRILL RIG (Ref#11116Tb) Manufactured 1999, 900/350 Doosan air compressor (new 2022), Cat 3406 deck engine (rebuilt May 2022), approx 950 hours on compressor and engine), rotation head completely rebuilt 2024 as well as most hydraulic pumps, mounted on 2005 Kenworth T800 truck (approx 212k miles), with new 565 hp Cummins IXS engine installed with only approx 18,500 miles), 18 speed transmission, located Canada Price: $480,000 USD
INGERSOLL RAND T3W (Ref#10326T) Mounted on 1995 Ford F9000 tandem axle truck Price: $400,000
INGERSOLL RAND T3W DRILL RIG (Ref#9439T) Manufactured 1988, good condition Price: $195,000 USD
INGERSOLL RAND T3W (Ref#8705c) Manufactured 1988, 825/350 air compressor, Cummins 855NTA deck engine, mounted on Ford truck with Cummins engine, drill pipe Price: $170,000
INGERSOLL RAND T3W (Ref#1650N) Manufactured 1987, 825/350 air compressor, 855 Cummins deck engine, mounted on International truck with L10 Cummins, 32’ mast, Cat 20 gpm water injection, standard pullback, 300’ of 4-1/2” (3-1/2 API Reg) drill pipe, 6” hammer Price: $155,000
(3) INGERSOLL RAND TRUCM DRILL RIGS PACKAGE (Ref#2100T)
INGERSOLL RANDTRUCM Manufactured 1975, 750/250 air compressor, 903 Cummins diesel on deck, mounted on Crane Carrier with 501 gas engine, water injection pump, 240’ of 4-1/2” x 25’ drill pipe, handling tools, running condition
INGERSOLL RAND TRUCM Manufactured 1974, 750/250 air compressor, 903 Cummins diesel on deck, mounted on Crane Carrier with 501 gas engine, water injection pump, 240’ of 4-1/2” x 25’ drill pipe, handling tools, running condition
INGERSOLL RAND TRUCM Mounted on Crane Carrier with 501 gas engine, 903 Cummins diesel engine, parts rig
PRICE FOR ALL THREE RIGS: $60,000
INGERSOLL RAND TRUCM (Ref#8569T) Manufactured 1974, Sullair 650/250 air compressor, Detroit 8V71 deck engine, 45,000# pullback, mounted on Crane Carrier with 400 Cummins engine, no mud pump, (has a 4 x 8 Gaso tag along), 350’ drill pipe POR
INGERSOLL RAND TRUCM (Ref#7436) Manufactured 1968, converted to hydraulic, 600/150 air compressor, 4 rod carousel, mounted on 1956 International truck, 671 Detroit diesel engine, Price: $25,500
INGERSOLL RAND TRUCM (Ref#535N) Manufactured 1963, 600/125 air compressor, mounted on Crane Carrier with 450 gas iengine, 671 Detroit diesel on deck, 225’ pipe, hammer, 6” bits, 6 gpm Bean pump, Price: $19,500
INGERSOLL RAND TH75 DRILL RIG (Ref#7418T) Manufactured 1991, 900/350 air compressor, Cummins KTA19 deck engine, no mud, mounted on Paystar 5000 truck with diesel engine (2000 miles on new engine), no drill pipe Price: $240,000
Has extra equipment available to convert to reverse circulation rig
INGERSOLL RAND TH75W (Ref#9634Nb) Manufactured 1991, 900/350 air compressor, 3 x 4 centrifugal mud pump, Cummins KT19 engine on deck, 50,000# pullback, Cat water injection, line oiler, mounted on Paystar 5000, approx. 55,700 miles, N14 Cummins diesel engine, set up for 3-1/2” drill pipe, ready to work, currently drilling Price: $320,000
ATLAS COPCO DIAMOND BACK DB40 DRILL RIG PACKAGE (Ref#10064T) Manufactured 2016, vertical and horizontal drilling, approx 4,000 hours, 1200/350 air compressor, centrifugal mud pump, 40,000 lb pullback, 30,000 lb pulldown, 3” ID rotary 8000 ft/lbs, 17” drill table, Dynaset 39 gpm 1200 psi water injection, 18,000 lb winch, 183’ 3000 lb sandreel, mounted on 2016 Peterbilt truck (approx 8,000 miles) with Cummins ISX-15 (600 hp) engine (compliant In California), PTO, approx. 6,500 total hours
Complete with the following:
740’ 0f 4.5” x 20’ drill pipe, (1) 21’ Drill Collar 6000# weight, (1) 6’-8’ Drill Stabilizer 3200# weight, (2) Drill subs, (2) Main line sheeve, (6) small PTO bearing assembly, (1) PTO Shaft Bearing Assembly, (3) Off Brand Special geared top drive motors (cost $10K), (2) Eaton Special geared top drive motors (cost $16k), New clutch in the box for 2016 Peterbilt truck (cost $2k)
Price for everything: $680,000
INGERSOLL RAND TH60 DRILL RIG (Ref#3378T) Manufactured 2016, 1050/350 air compressor, mounted on 2015 Peterbilt truck, only 500 hours, included 700' of 4-1/2" drill pipe Price: $895,000
INGERSOLL RAND TH60 (Ref#5831T) Assembled in 2007, Gardner Denver THE Triplex mud pump (rated at 462 GPM at 720 PSI), no air, extended 38’ mast, 45,000# hoisting capacity, 28’ travel, 28,000 pound pullback capacity, Ingersoll Rand 4 motor top drive with 6,650 ft-lb torque, 23,000# Braden CH230B-35120 main winch, Braden Aux winch with 1,000’ of ¼” cable, Western Rubber 25CHD high pressure (90,000# static, 1500 PSI) swivel, 3” ID Steel, 5000 psi with Pulsation dampner and shear relief mud piping, Mounted on 2003 Kenworth T800B Tridem drive truck with CAT C15 (475HP) diesel engine and Dana Spicer 792 heavy duty PTO, Eaton Fuller RTLO 181918 B transmission, no rod box, no carousel Price $620,000
INGERSOLL RAND TH60 DRILL RIG (Ref#11116Ta) Manufactured 2004, 1070/350 IR air compressor (new 2021), Cummins engine (rebuilt 2021), new transfer case 2022, mounted on International Paystar tri-drive, set up for 3-1/2” drill rods, located Canada Price: $495,000 USD
INGERSOLL RAND TH60 DRILL RIG (Ref#5158T) Manufactured 1999, 825/350 air compressor, 4 x 3 centrifugal mud pump, Mounted on International truck with Cat C15 (rebuilt with 2300 hours), PTO, 340’ of 4-1/2” rod Price: $365,000
INGERSOLL RAND TH60 (Ref#849N) Manufactured 1989, 750/350 air comprescasor, mounted on GME truck with rebuilt Detroit 8V92 engine, new transmission, 38’ mast, 6 rod carousel, replaced gearbox Price rig only: $625,000
Also available at extra cost:
Casing hammer, hammers, 1000’ of pipe, 5”, 6” and 8” down the hole hammers, reamers, excellent condition.
1998 FORD LOUISVILLE FLATWATER FLEET TRUCK Manufactured 1998, 1500 gallon water tank, Cat 3406 engine, 200 gallon aux fuel tank with electronic hose reel with pump, deck welder, aluminum alloy wheels, new Michelin tirs, flood lights, Lincoln 250 deck welder, 6 toolboxes on side and rear, new brakes, excellent condition
2012 FORD 1 TON DUALLY SERVICE TRUCK
INGERSOLL RAND TH60 DRILL RIG (Ref#13113T) Completely refurbished 2007, 2 deck engines: Cat 3306B direct drive to 750/250 IR air compressor, John Deere 6068T (175 hp) running hydraulics (Rex Roth aned C.I.H. pressure compensated), High pressure triplex water injection pump, FMC triplex mud pump 137gpm/1390 psi), 33’ derrick (1977 – new sheaves, pins, bushings and cables in 2018), new table and table bushings in 2007, hydraulic welder, hydraulic pipe spinner, mounted on 1990 Tandem Tandem acab over Freightliner truck with 444 Cummins, 300’ of 3-1/2” drill pipe (2-3/8 IF), casing hammer, 6” hammer, bits, subs, located Canada Price: $140,000 CAD
INGERSOLL RAND TH60 DRILL RIG – RANGE III EXTENDED MAST (Ref#3180T) Manufactured 1980’s, completely rebuilt, 750/250 air compressor, 5-1/2 x 8 Gardner Denver mud pump, Range III extended mast, mounted on 2006 Mack triaxle with Mack diesel engine (rebuilt engine), PTO, no rod box, no pipe or tools included Price: $200,000
INGERSOLL RAND TH60 (Ref#15093R) Manufactured 1985, 750/250 air compressor, 38’ extended mast, Detroit 8V92 PTO engine with Cotta box (new Cotta box), 7 rod carousel, rod box, Wilden mud pump, mounted on GMC tandem axle truck, standard tools, 300’ of 4-1/2” x 20’ drill pipe Price: $255,000
INGERSOLL RAND/CYCLONE DRILL RIG (Ref#4467T) No air (but plumbed for air), Gardner Denver 5 x 6 mud pump, 30’ derrick, mounted on 2001 International 5600 I6x4 truck with 470 HP Cat diesel engine, PTO, new front tires, 30’ extended derrick, direct hydraulic, no pipe spinner, no carousel, rod box, 640’ of new heavy wall 3-1/2” x 20’ drill rod, new stabilizer, new shock sub, located Canada Price on Request
INGERSOLL RAND TH60 DRILL RIG (Ref#10501Ta) Manufactured 1985, mounted on Western Star truck Price on Request
INGERSOLL RAND TH60 DRILL RIG (Ref#10631T) Manufactured 1983, retrofitted with 900/300 air compressor (installed 2019 with approx. 1400 hours), Deutz V12 twin turbo deck engine, mounted on 2002 Forden truck with Cummins engine, 4000 miles, rod box, no carousel, 350’ of 4-1/2” x 20’ drill pipe, 8” and 6” hammer and bits, located Europe Price: 165,000 EUROS
INGERSOLL RAND TH60 (Ref#10343T) Manufactured 1981, mounted on 1981 International 5070 with Cat 3406C engine, 750/250 air compressor, 38’ extended mast with casing hammer, Lincoln welder, Bean 20 gpm water injection, line oiler, rod box, 3 hyd leveling jacks, carousel and Mission magnum mud pump available but removed from rig, good condition, currently drilling Price: $135,000
Available at extra cost:
680’ of used 3-1/2” x 20’ drill pipe
180’ brand new 3-1/2” x 10’ drill pipe
300’ of 4-1/2” x 20’ brand new drill pipe
INGERSOLL RAND TH60 DRILL RIG (Ref#1378T) Manufactured 1978, 600/250 air compressor, Gardner Denver 5 x 6 hydraulic driven mud pump, mounted on 1978 International Paystar with Cat diesel engine, PTO, 11 rod carousel set up for 3” drill rod, rod box Price: $195,000
INGERSOLL RAND TH60 DRILL RIG (Ref#7030T) Manufactured 1978, 600/250 air compressor, 7 rod carousel (set up for 4-1/2” rod), mounted on International Paystar Price: $165,000
INGERSOLL RAND (Sanderson-Cyclone) TH60 (Ref#7093T) Manufactured 1973, 256 S2 air compressor, mounted on 1974 Ford 9000 truck with Detroit 8V71, compressor could use some valve work (valve bank will need some end caps), fair condition Price: $39,500
INGERSOLL RAND TH60 COMBINATION ROTARY/SPUDDER DRILL RIG (Ref#12279T) Developmental air compressor, 5 x 5 Gardner Denver mud pump, Cat diesel deck engine, mounted on 1971 Ford tandem axle truck with Cat engine, 9 rod carousel, pipe rack, 500’ cable, 500’ bailing line, casing wrench, 3 hydraulic leveling jacks, sitting 4 years but running when parked and he cranks up the engines Price: $95,000
INGERSOLL RAND TH60/CYCLONE 36 (Ref#15015) Manufactured 1973, developmental air compressor, 3 x 4 mud pump, mounted on Paystar 5000 6x6 truck with new Cummins engine, air brakes, 13 speed transmission, breakout wrench, water injection, excellent condition, currently drilling, new hydrostatic, new swivel, new tophead, 3 leveling jacks, 200’ of 3-1/2” x 20’ drill pipe PRICE: $90,000
CYCLONE / TH60 (Ref#5001T) Mounted on 1964 Ford tandem axle truck with diesel engine, PTO, 3 jacks, SDS 50 air compressor, Gardner Denver 5 x 6 hydraulic driven vari speed pump Price: $85,000
INGERSOLL RAND/CYCLONE 35/36 (Ref#10692T) Manufactured 1975, air compressor, Gardner Denver mud pump, Ford 300 6 cyl gas deck engine, mounted on 1985 Ford 9000 tandem axle truck with Cat 3406, sitting a few years buts starts, 300’ of 3-1/2” x 15’ drill pipe Price: $45,000
CYCLONE 36R COMBINATION CABLE/TOPHEAD DRILL RIG (Ref#7661Ta) Developmental air compressor, plumbed for centrifugal mud pump, Cummins diesel deck engine, mounted on 1970’s International tandem axle truck with gas engine, pipe rack, 4 hydraulic leveling jacks, 180’ of 3-1/2” x 15’ drill pipe (2-7/8 thread) Price: $37,500
INGERSOLL RAND TH60 PARTS RIG (Ref#7202Tb) No mast
INGERSOLL RAND TH55 (Ref#10803N) Manufactured 1985, 600/350 air compressor, mounted on 1985 GM truck, 6V92 Detroit engine, PTO, standard pullback, 300’ drill rod, basic tools Price: $140,000
INGERSOLL RAND TH55 (Ref#6524T) Manufactured 1979, 50 SDS air compressor, 3 x 4 mud pump, water injection pump, 320’ of 3-1/2” (2-3/8 IF) drill pipe, 8-1/4” x 17’ stabilizer, short stabilizer (needs tool joint), 4” suction hose, elevators, desanding cone, mud mixer
Price: $64,500
INGERSOLL RAND TH55 (Ref#9285R) Manufactured 1976, 3408 Cat diesel engine, PTO, 3 cylinder piston air compressor (developmental), 4 x 3 centrigual mud pump, mounted on International tandem axle truck Price: $65,000
Available at extra cost:
1976 GMC TANDEM AXLE 2000 GALLON WATER TRUCK (Ref#9285Rb), 366 Chevy gas engine with Chemgrout 550 grouter Price: $21,500
CYCLONE 35R/TH50 COMBINATION RIG (Ref#9429T) Mounted on 1988 Ford L8000 truck with Cat 3208 Turbo engine, PTO, new tophead drive, Ingersoll Rand 125/175 air compressor, 7-1/2 x 10 Centerline mud pump on deck, mud pan, 3 x 2 Mission Magnum mud pump, rod box, all new hydraulics and hoses, includes 300’ of 15’ of Mayhew Jr rod and 480’ aluminum drill rod Price: $147,500
CYCLONE TH40 DRILLING RIG (Ref#13956T) Manufactured 1968, mounted on 1968 Chevy truck, 270’ of 3” thread end rod 2-3/8” drill stem, mud pan, drive hammer. 1981 International 1500 gallon water truck Package Price: $65,000