AUGER RIGS FOR SALE
Last Updated: 11/20/2024 11:36 AM
Acker XLS, Soilmax, ADII, Coremaster, MP-V C
Big Beaver
BRAINARD KILLMAN
Canterra CT-550, CT450, CT-411, CT-312, CT-311, CT-350, CT-250, CT-150
CME 1250, 1050, 850, 750, 550, 450, 85, 75 (HT), 55, 45(B)(C)
Cyclone 36A
Davey
DeeprockRAM 10XL, 10K, D-170, 3-K, 20
Diedrich D-120, D-90, D-50
DynoDrill
Explorer
FailingF10(WT), F8, F7(WT), F6, F2
Foremost/Mobile Investigator 3500
Georex
Gtech GT8-Max
Gus Pech Auger Drill
Hillview
Ingersoll Rand A-300
Longyear BK-81 HDX
Mobile B80 (22), B66HDX, B65, B61(HDX), B59, B57, B56, B53, B-52A, B50, B47, B40(L), B-34, B-31, B30
Simco5000, 4000TRI, 2800, SK-1 2400
GTECH GT-8 MAX GEOTECHNICAL AUGER/CORING/MUD/AIR ROTARY TRACK MOUNTED DRILL RIG (Ref#407T) Manufactured 2022 (delivered Jan 2023), approximately 1100 hours, Centerline Mono mud pump, plumbed for external air compressor), 44,000 LBS push and pull capacity, 16” head sliding clearance, 10” front/rear slide mast, 1970’ NWL core capacity, located Canada Price: $625,000 CDN
CME 1250 (Ref#1120N) Manufactured 1987, track mounted with Cat 3208 turbo diesel engine, angle capable, 4 winches, auto hammer, Moyno 3L8 pump, breakout wrench, hydraulic rod holder, 31,600 ft/lbs torque, 4 hydraulic leveling jacks PRICE: $180,000
CME 1050 DRILL RIG (Ref#9163T) Manufactured 2002, 3,149 hours as of October 2023, currently in service, 3 tower winches, New Moyno 3L10 pump, breakout table, 24,000 lb down pressure, 48,000 lb retract force, many new parts Price: $207,500
CME 1050 (Ref#13103Ta) Manufactured 2002, quick disconnect mast, Cummins 6BT 5.9 turbo engine, side to side and in and out slide base, 10,000# main winch, 4000# aux winch, 200 lb tool winch, wireline/sandline winch, 140# auto hammer, Moyno 3L10 pump (new), 200 gallon water tank, toolbox, rod rack, extruder, 2 hydraulic auger racks, hydraulic rod clamp with breakout wrench, hydraulic chucks with 3-1/2” fluted Kelly, 2 rear and 1 front leveling jacks, mounted on CME buggy with Cummins diesel engne, automatic transmission Price: $169,500
CME 850 AUGER DRILL (Ref#6168T) Manufactured 1999, 4BT Cummins engine Price: $112,500
CME 850 (Ref#11920N) Manufactured 1997, Cummins deck engine, track mounted, in-out and side to side slide base, 23’ quick disconnect mast, angle capability, 140# auto hammer, breakout wrench, no cathead, Moyno 3L6 pump, 3 hoists, water tank, 3 hydraulic leveling jacks Price: $135,000
CME 850 (Ref#12366T) Manufactured 1988, Cummins 4BT engine (new), auto hammer, 3 winches, cathead, 3L8 Moyno pump, wiggle tail, breakout wrench, rod holder, new tracks Price: $62,500
CME 850 AUGER DRILL (Ref#7309Tf) Manufactured 1986, 4556 hours, 3L6 Moyno pump, wiggle tail, slide base, 2 winches, 140lb auto hammer, 150 gal water tank, deck toolbox, 10’ rod rack Price: $52,500
CME 850 (Ref#1345R) Manufacuted 1986, 2 winches, wireline, cathead, Moyno 3L6 pump, auto hammer PRICE: $70,000
CME 850 (Ref#14521RA) track mounted, ready to go Price on Request
CME 750X (Ref#4178Ta) Manufactured 2012, 4 hoists, Moyno 3L10 pump, fluted Kelly, breakout, cathead, 140/300, auto hammer, 2” swivel, 3400 hours, pre-emmissions Cummins engine, loaded Price: $330,000
CME 750X ATV DRILLING RIG (Ref#8322T) Built 2002, Cummins 6 cylinder diesel engine, high torque rotary drive 750, tandem hydraulic pump option, 2” hex auger drive, quick disconnect mast, cathead, 8500# hoist, 3200# hoist, 1800# hoist, wireline, Moyno 3L6, 140# automatic hammer Price: $177,500
Available at extra cost:
2005 Peterbilt 378 with 2013 Haulass LB35-T trailer
CME 750 ATV (Ref#12370T) Manufactured 1995, mounted on ATV carrier, Cummins 4BT diesel engine, auto hammer, 3 winches, cathead, 3L8 Moyno pump, breakout wrench, rod holder, new tires and winch for carrier Price: $92,500
CME 750 (Ref#3514Rb) Manufactured 1986, mounted on CME rubber tires carrier, 6 cylinder 300 gas engine, 21’ mast, quick disconnect, 2 hoist lines, 1 winch, rod holder, auger rack, auto hammer, new slitch and new PTO, 3 hydraulic jacks Price: $80,000
CME 750X ATV AUGER DRILL RIG (Ref#3435T) Manufactured 1993, new diesel engine, angle capabilities, Rebuilt 3L8 Moyno pump in 2024, mounted on ATV carrier, wireline winch, 3 additional winches, auto hammer, fluted kelly, in/out slide base, breakout table, breakout wrench, 3 hydraulic leveling jacks, hydraulic clutch, new tires, great condition, working daily Price: $79,500
CME 750 DRILL RIG (Ref#3451Tb) Auto hammer, 3 winches, 6 cylinder Deutz diesel Tier 1 engine, runs and drives great, no leaks, 50' hollow stem auger Price: $52,500
CME 750 AUGER DRILL AND TRUCK/TRAILER PACKAGE (Ref#5897T) Manufactured 1972, Moyno pump, mounted on ATV buggy carrier powered by Ford 300 6-cyl gas engine, PTO, CME auto hammer, cathead, in/out slide base, 3 leveling jacks, auger racks, large tool box, water tank, 3 winches, quick disconnect tower. 2001 Freightliner FL70 with diesel engine and 31’ Roge trailer. Package Price: $50,000
CME 750 (Ref#2248T) Manufactured 1974, excellent condition, mounted on CME rubber tire buggy, 300 Ford Industrial motor (new 2017), 2 winches, 3L6 Moyno, auto hammer, rod holder and breakout wrench, ready to work Price: $62,500
CME 550X (Ref#13289T) Manufactured 2009, Cummins 4BT diesel engine, 11,500 hours, rubber tired, angle package, automatic hammer, hydraulic rod clamp, breakout wrench, loaded Price: $187,500
CME 550X AUGER BUGGY DRILL RIG (Ref#5549Tb) Manufactured 2008, 9000 hours, Bean pump, 140# auto hammer, slide base, angle capabilities, wiggle tail, rod clamp, fluted kelly, buggy has broken front axle Price, as is: $152,500
CME 550X AUGER DRILL (Ref#619Ta) Manufactured 2004, 4600 hours, Cummins diesel engine, angle capability, auto hammer, 3 winches, wireline, 3L8 Moyno pump, new coupler, bearing plates, u joints, no leaks, runs great Price: $197,500
CME 550 AUGER DRILL RIG (Ref#3048Tc) Manufactured 2004, angle capabilities, mounted on Buggy, Cummins QSB4, 5 speed, 3L6 Moyno Pump, breakout table, breakout wrench, fluted kelly, new hydraulic pump, new tires Price: $200,000
CME 550X DRILL RIG (Ref#6253Ta) Manufactured 2003, auto hammer, side swivel, primary winch, (2) secondary winches and wireline, Cummins 4BT engine, water pump, breakout table, angle package, rod racks, auger racks Price: $117,500
CME 550X BUGGY MOUNTED AUGER DRILL (Ref#395T) Manufactured 2003, 140# auto hammer, wireline drilling capabilities, angle drilling capabilities, Bean piston style water pump, Cummins diesel engine and transfer case both recently replaced new, currently drilling, no tooling included Price: $97,500
CME 550X AUGER DRILL (Ref#9978T) Manufactured 2001, B4.5 Stage V motor installed new in 2019, 3 winches, auto hammer, Moyno 3L8 pump, rod clamp, breakout table, 2 auger racks, recently repainted Price: $122,500
CME 550X (Ref#7245T) Manufactured 1999, 3L6 Moyno pump, wireline, angle drive, in and out and side to side slide base, 3 winches, one wireline winch, winch on carrier, auto hammer, breakout table, quick disconnect mast, wiggle tail, breakout, 2 water tanks totaling 180 gallons, high torque rotary box, mounted on ATV rubber tire carrier, new tires, right angle drive rebuilt, set up for rock coring. Within past year replaced with new parts: Complete rebuild of rotary box (all new bearings, chain and both sprockets), replaced all drive shaft under carry, 4 new tires, new battery, replaced some of the hydraulic hoses where needed, new wires so safety systems work, new cable winch, new chain in auto hammer, replaced bearings in right angle drive, replaced seat, new alternator and starter, new water swivel on top of rotary box Price: $102,500
CME 550X DRILL RIG (Ref#6253Tb) Manufactured 1998, auto hammer, side swivel, primary winch, (2) secondary winches and wireline, Cummins 4BT engine, breakout table, angle package, rod and auger racks Price: $82,500
CME 550 BUGGY DRILL RIG (Ref#4781Ta) Manufactured 1989, Cummins deck engine, in/out slide base, auto hammer, Moyno pump, (2) Pullmaster winches (PL5, PL2), 3200 lb gear winch, auger guard, water tank, no angle capability. Good condition, recently rebuilt both transmissions, power divider/PTO, rear differential and fuel pump, currenty working. Price: $87,500
Also available at extra cost:
1990 VOLVO/AUTOCAR TRI-AXLE RIG CARRIER (Ref#4781Tb) Cat 3406 engine, 180,000 original miles
22 pieces of 3.75” x 5’ CME hollow stem auger, cutterhead, 2 drive heads, center plug
CME 550 ATV AUGER RIG (Ref#8445T) Manufactured 1988, auto hammer, 3L8 Moyno pump Price: $80,000
CME 550 ATV (Ref#12368T) Manufactured 1988, Cummins 4BT diesel engine, auto hammer, 3 winches, cathead, 3L8 Moyno pump, breakout wrench, rod holder, new tires and winch for carrier Price: $62,500
CME 550 (Ref#8831Rb) Manufactured 1982, for parts or rebuild Price: $17,500
CME 550 (Ref#4097N) Manufactured 1977, mounted on buggy carrier, 300 Ford 6 cylinder gas engine, 3L6 Moyno pump, no tools
2002 10-ton trailer
1987 Ford F800 diesel truck w/500 gal aluminum tank
Package Price: $85,000
CME 550 (Ref#4258N) Manufactured 1976, mounted on ATV with 300 gas engine, PTO, quick disconnect mast, in/out slide base, auto hammer, 3L8 Moyno pump, cathead, 100 gallon water tank, needs repairs Price: $29,500
CME 95 (Ref#5718T) Manufactured 1993, Cat 3208 deck engine, mounted on 1993 Ford LTS9000 with Cummins L10 engine, (5) winches, 140# SPT hammer, rod clamp, in-out & side to side slide base, Moyno 3L8 pump, 1 front & 2 rear hydraulic leveling jacks, no tools or augers, ready to go, good condition Price: $155,000
CME 95 (Ref#4199Ta) Manufactured 1992, mounted on tri axle 1992 Mack truck POR
CME 95 (Ref#6305N) Manufactured 1988, Cat 636 cu in 8 cylinder turbocharged liquid-cooled diesel deck engine rated at 250 hp, mounted on 1993 Freightliner, Cat 3406B engine, Jake Brake, Fuller 9 speed transmission Price: $115,000
CME 85 (Ref#10261T) Manufactured 1993, Cummins diesel deck engine, auto hammer, mud pump, in/out and side to side slide base, 2” pipe, mounted on 2004 Kenworth truck Price on Request
CME 75 AUGER DRILL (Ref#9762Ta) Manufactured 2008, no angle capabilities, 6 cylinder Cummins on deck, mounted on 2009 Mack truck, 410 hp Mack engine, 3 winches (1800#, 3200#, 8000#), Moyno 3L8 pump, 10 speed Fuller transmission, 140# hammer, hyd chuck (needs repair), needs new tires Price: $245,000
CME 75HT AUGER DRILL (Ref#7919T) Mounted on Raymar tracks, Tier 3 Deutz engine with 4000 hours, 3 winch lines, auto hammer, rod gripper, water tank, Bean 35 pump. Includes a 2015 Peterbilt hauler with 660,000 miles (recently serviced by Peterbilt) Price: $235,000
CME 75HT (Ref#2541T) Manufactured 1998, angle capability, wireline, diesel deck engine, Moyno 3L8, auto hammer, munted on 2013 Inrternational truck with diesel engine, CDl required Price: $242,500
CME 75 AUGER DRILL (Ref#12930Tb) Manufactured 1984, Cummins 6 cylinder diesel engine, 4 winches (7000 lb, 3200 lb, 1800 lbs), 3L8 Moyno pump, water swivel, 140 lb auto hammer, in/out side/side slide base, rod holder, breakout wrench, 500 gal water tank, toolboxes, mounted on 2002 International 4700 truck, 3 hydraulic jacks Price: $87,500
CME 75HT AUGER DRILL (Ref#4230T) Manufactured 1990, mounted on Morooka MST1500, high torque rotary drive, Cummins 6 cylinder diesel engine, 4 winches 7,000 lb, 32,00 lb, 1800 lb and wireline, 3L8 Moyno water pump, water swivel, 140 lb auto hammer, rod holder, breakout wrench, stainless steel water tank and toolboxes, slide base in and out and side to side, 3 hydraulic jacks, front auger rack Price: $127,500
CME 75 DRILL (Ref#3319T) Unmounted, fully loaded, diesel drill with 8000 hours Price: $107,500
CME 75 AUGER DRILL (Ref#1228T) Manufactured 1987, angle drill, Cummins 5.9 6 cyl diesel engine, auto hammer, wiggle tail, 3L8 Boyno pump, rotary box rebuilt, right angle drive rebult, new alternator, unmounted Price: $100,000 USD
CME 75 (Ref#14788T) Manufactured 1985, mounted on Morooka MST 1500 tracked carrier with Mitsubishi 6 cyl diesel engine, Ford 300 engine, 3L8 Moyno, 400 gallon stainless water tank, one auger rack, 4 kill switches, 3 winches, 3 toolboxes, wiggle tail, breakout wrench, wireline, rig in good condition, 4491 hours on rig, 6698 on the Morooka, sitting one year, new tracks, no tooling PRICE: $97,500
CME 75 AUGER DRILL RIG (Ref#1837Ta) Mounted on Morooka MST1500 with Freightliner truck POR
CME 75 (Ref#14442T) Built late 1970’s early 1980’s, Cummins deck engine, angle capable, in/out and side to side slide base, water tank, Moyno pump, mounted on Ford 700 tandem axle 2WD truck with diesel engine, no auto hammer, cathead, no tools or augers Price: $112,500
CME 75 (Ref#4259N) Manufactured 1979, 300 gas deck engine, mounted on 1983 International truck with diesel engine, 3L8 Moyno pump, cathead, 250 gal water tank, in/out and side to side slide base, breakout wrench, truck does not run PRICE: $27,500
CME 75 (Ref#8286b) Manufactured 1979, mounted on International single axle truck with diesel engine, gasoline engine on deck, 3 leveling jacks, cathead, slides in/out, 3L6 Moyno pump Price: $50,000
CME LC60 TRACK MOUNTED AUGER DRILL (Ref#9762Tb) Manufactured 1999, 4 cylinder John Deere engine, track mounted, Moyno 3L8 pump, remote control, 3227 hours Price: $147,500
CME LC60 (Ref#4885Tf) Manufactured 1997 Price: $92,500
CME 55HT (Ref#9882T) Manufactured 2005, diesel engine on deck, Moyno 3L8 pump, mounted on 2005 GMC 7500 truck with diesel engine, auto hammer, breakout wrench, 25’ mast, in/out and side to side slide base, water tank, 3 winches, toolboxes Price: $232,500
CME 55 AUGER DRILL RIG (Ref#3048Tb) Manufactured 1999, rubber tracks, 4 cyl Cummins 4-BT diesel engine, 4 speed transmission, auto hammer, 2 winches, 3L6 Moyno pump, breakout table, breakout wrench, wireline system, auger racks, 3 toolboxes Price: $160,000
CME 55 AUGER DRILL RIG (Ref#4392T) Manufactured 1991, cathead, in/out slide base, gas deck engine, Moyno Pump, Drive Shoe (2 weights that hammer), mounted on 1991 International dually with diesel engine, 2 rear jacks, pipe rack, includes tools and 120’ of 2” stem and 100’ of 3” steam Price: $47,500
CME 55 (Ref#3353T) 7500 hours on deck engine, PL5 winches, SPT hammer, under belly auger racks, mounted on 1996 International 4700 4x4 truck, 59,000 miles, used daily Price: $72,500 USD
CME 55 (Ref#12371T) Manufactured 1990, Deutz 6 cyl diesel engine, cathead, 2 winches, 3L8 Moyno pump, wiggle tail, breakout wrench, rod holder, mounted on 1990 Ford F700 truck, diesel engine, approx. 33,000 miles Price: $112,500
CME 55 (Ref#6807N) Mounted on 1988 Ardco 4 wheel drive buggy with diesel engine, 2 winches, gasoline engine on deck, auto hammer, cathead, 3L Moyno pump Price: $95,000
CME 55 AUGER DRILL RIG (Ref#3853Ta) Manufactured 1987, 6 cyl Ford gas engine on deck, mounted on 1987 Single axle International truck with diesel engine, Beam pump, drop hammer, cathead, rebuilt transmission and rear end, 60+' of 4-1/4" Acker augers, starts & runs Price: $37,500
CME 55 (Ref#12363T) Manufactured 1985, Ford Gas Industrial 300 engine, auto hammer, 3 winches, cathead, 3L8 Myno pump, siggle tail, breakout wrench, rod holder, mounted on 1998 Ford F800 diesel engine, 17,000 miles Price: $87,500
CME 55 TRACK MOUNTED AUGER DRILL (Ref#7309Te) Manufactured 1985, mounted on 1999 Morooka MST 1100 rubber tracked carrier, 463 hours on deck engine, engine has oil blowby, 3L6 Moyno pump, wiggle tail, slide base, cathead, 2 winches, 150 gal water tank, deck toolbox, 10’ rod rack, front winch on carrier Price: $52,500
CME 55HT (Ref#9854T) Manufactured 1984, gas deck engine, in/out and side to side slide base, Moyno 3L6 pump, auto hammer, cathead, breakout wrench, 3 winches, water tank, auger racks, 2 toolboxes, driller’s platform, mounted on 1999 GMC 6500 truck with diesel engine Price: $62,500
CME 55 (Ref#3840T) Manufactured 1981, Ford 6 cyl, mounted on 1999 International, diesel, CDL, auto hammer, 2 winches, new hydraulic pump, Moyno water pump Price: $57,500
CME 55 (Ref#11729Ta) Manufactured 1978, Wisconsin gas deck engine, in/out slide base, cathead, water pump, Moyno pump, water tank, no angle, SPT Hammer, no auto hammer, mounted on 2000 International tandem axle truck with diesel engine (having issues with truck), 2 rear leveling jacks Price: $39,500 Price unmounted: $27,500
CME 55 (ref#3514Ra) Manufactured 1974, Ford 300 gas deck engine, 3L8 Moyno pump, auto hammer, 1 hoist, water tank, mounted on 1997 Ford F750 truck Price: $50,000
CME 55 TRACK MOUNTED AUGER DRILL (Ref#9164T) Diesel engine, no tools or augers Price: $57,500
CME 55 (Ref#10155T) Manufactured 1974, mounted on 1968 Bombardier track carrier POR
CME 55 (Ref#886N) Manufactured 1973, completely gone through in nice condition, 6 cyl Ford gas engine, mounted on 1980 single axle Ford LN8000 truck with 3208 Cat diesel engine, cathead, 3 winches and wiggle tail, 6 ton Pitman hoist, Pitman hoist for loading/unloading augers 32’ reach ½” cable, (10) drill rods, (12) 8” hollow stem augers and drive head and bits, (6) new 4” hollow stem auger and drill head and bits, 4” solid stem auger bits, 6” solid stem auger and bits, (12) split spoons and hammers Price: $44,500
CME 55 (Ref#15056) Manufactured 1973, mounted on Ardco buggy with gas engine, 300 6 cyl gas deck motor, 1 winch, cathead, hammer, 20’ of 2.24” HAS and AWJ rods Price: $72,500
CME 55 (Ref#12604N) Rig manufactured 1972, 300 Ford Industrial gas deck engine, mounted on 1986 Ford F700 (not 4x4) with gas engine, 30’ mast, in/out and side to side slide base, cathead, 2 hoisting winches, 140# hammer, 170# TX DOT hammer, 2” swivel, 3L6 Moyno pump, toolbox, auger racks, 50’ of 5’ and 100’ of 10’ NWJ rods, 75’ straight flight 4-1/2” augers, fully tooled, ready to go, 3 hyd leveling jacks Price: $50,000
CME 55 (Ref#12373T) Manufactured 1971, new 3 cylinder Deutz diesel engine, cathead, 2 winches, 3L8 Moyno pump, breakout wrench, rod h older, mounted on 1989 Ford F700 diesel motor, approx. 22,000 miles Price: $102,500
CME 55 (Ref#1090T) Manufactured 1967, older rig but runs, no angle capability, Ford 300 gas deck engine, in/out slide base, cathead, no autohammer, 2 winches, Moyno pump, auger racks, mounted on 1978 Chevy C65 truck with gas engine, 3 hyd leveling jacks Price: $18,500
CME 55 AUGER RIG (Ref#197T) Rig built 1965, currently running and well maintained, mounted on 1993 Ford F600 2 x 4 truck with 6.6 diesel engine, Ford 4 lineline gas deck engine, New Moyno 3L4 pump, Diedrich auto hammer, 1 winch, cat head, non CDL Price: $82,500
CME 55 (Ref#9132R) Manufactured 1969, mounted on 1965 Dodge 500 single axle truck, Ford 4 cylinder gas Price on Request
CME 55 (Ref#8286a) mounted on single axle Chevy truck with gasoline engine, 3L6 Moyno pump, 3 leveling jacks, gasoline engine on deck Price: $55,000
CME 55 (Ref#14114T) Manufactured 1977, Ford 6 cyl ind gas deck engine, mounted on 1995 International single axle truck with diesel engine, no angle capability, rebuilt Moyno pump, cathead, SPT hammer, no auto hammer, auger racks, toolboxes, no water tank, 3 hydraulic leveling jacks, tooling, drilling now, ready to go Price $59,500
CME 55 AUGER DRILL RIG (Ref#8357T) Manufactured 1969, gas deck engine, in/out and side to side slide base, cathead, mounted on 1985 Ford F700 2WD truck with gas engine, manual transmission, no angle capability, no auto hammer, auger/pipe rack, water tank and water pump, 3 hydraulic leveling jacks Price: $42,500
NWJ rods and safety hammer available at extra cost
CME 55 AUGER DRILL (Ref#13451T) Mounted on Ford truck with diesel engine, auto hammer Price: $87,500
CME 55 AUGER DRILL (Ref#5338T) Built 1972, trailer mounted, Ramsey winch POR
CME 45C AUGER DRILL (Ref#5370T) Manufactured 2007, track mounted, diesel engine, auger rack Price: $137,500
CME 45C AUGER DRILL RIG (Ref#3298Tc) Manufactured 1999, 3 cyl 57 hp Duetz air cooled diesel engine, 2 winches, cathead, 140 # CME auto hammer, Moyno 3L6 pump, slide base, 300 gal water tank, front winch, toolbox mounted on 1995 Markooka MST 1100, 24" wide tracks Price: $125,000
CME 45C AUGER DRILL (Ref#3670T) Manufactured 1997, rebuilt, angle package, Deutz 3 cyl. diesel deck engine, in and out slide base, no wiggletail, 2 winches 3000# and 5000#, 20’ mast, wireline, auto hammer, new water tank, new hoses, drillers platform, mounted on 2015 Freightliner M2 with Cummins diesel engine, 26,000 GVW, non CDL, 210,000 miles on truck, 2 rear & 1 front leveling jack Price: $102,500
CME 45C AUGER DRILL RIG (Ref#5358T) Manufactured 1995, fully refurbished, new 3 cylinder diesel engine (3 hours), new transmission, new cylinders, new pump, 1 winch, auto hammer, cathead, wiggle tail, all new LED lighting, mounted on 1995 Ford F800 truck with Cummins 5.9L diesel engine (only 25,000 original miles) manual transmission, new front braeks, new tires, fully serviced, no CDL required Price: $200,000
CME 45C DRILL RIG (Ref#9763T) Manufactured 1993, trailer mounted, 3 cylinder diesel engine, 2384 hours, angle drilling system, automatic SPT hammer, hydraulic rod clamp and breakout wrench, cathead, hydraulic hoist, skid winch, Moyno 3L6 water pump, 3 hyd jacks, 2 toolboxes, under deck rod storage, in/out and side to side slide base Price: $72,500
CME 45C AUGER DRILL RIG (Ref#3048Ta) manufactured 1992, angle capabilities, skid mounted with trailer, VM1053 Diesel, 3L6 Moyno Pump, wireline system, four speed transmission, detachable/adjustable mast, 2 winches, auto hammer, rod storage, 6914 hours, 4 jacks, completely serviced, trailer has 2 rear jacks, auger racks, 1 front jack, steel boxes Price: $85,000
CME 45C TRACK MOUNTED AUGER DRILL (Ref#2703T) Manufactured 1990's, 3 cylinder diesel deck engine, track mounted, 2L6 Moyno pump, in/out slide base, drop hammer, cathead, includes custom trailer Price: $62,500
CME 45C (Ref#1823T) Manufactured 1988, 1.8L White-Hercules 4 cylinder gas engine on deck (rebuilt), in/out slide base, no wiggletail, cathead, several hydraulic lines need replacing, mounted on 1990 Mitsubishi truck (truck is not good), sitting 4-5 years. Price, as is: $19,500
CME 45C AUGER DRILL (Ref#6255T) Manufactured 1988, Deutz 3 cyl air cooled diesel rig engine (no hour meter), angle drill package, cathead, no autohammer, no breakout table/wrench, Liberty 3LL6 pump, 15’ mast, 20’6” total height from to top of mast, 8000 lb Koenig main winch, 8000 lb Koenig wireline winch, Ramsey Y600 load/unload winch, newer water tank, aluminum ramps for load/unload, mounted on 2009 Ford F750 with 5.9L Cummins engine, 5 speed manual transmission, air brakes, approx 24,500 miles, rig is on a skid mounted to truck, truck deck and toolboxes have some rust, rig hydraulic hoses need some replacing, rig has been cleaned and maintained and has been working in 2024 Price: $107,500
CME 45B (Ref#11890Tb) no angle, no Moyno, no tank, gas on deck, in-out, no tower, (was test rig) mounted on 1990 Ford F350 1-ton 4 x 4 truck with diesel engine (truck is no good) Price: $13,500
CME 45B (Ref#2428N) Manufactured 1979, completely refurbished, new 4 cylinder Wisconsin gas deck engine (rebuilt), mounted on 1992 Ford 700 (not 4x4) with diesel engine, cathead, in-out slide base, 3L6 Moyno pump (not hooked up), 300 gallon water tank, no auto hammer, 2 toolboxes, rod racks, 2 rear hydraulic leveling jacks PRICE: $34,500 - Tools & augers avail at extra cost
CME 45 AUGER DRILL RIG (Ref#946Ta) Manufactured 1974, on custom built tandem trailer, Wisconsin 4 cyl gas engine, missing Moyno pump, missing wireline winch, (3) leveling jacks, was running when parked but not used since 2016, needs overhaul and/or used for parts Price: $20,000 CAD
CME 45 (Ref#14521RB) track mounted, ready to go Price on Request
TRUCK BED FOR A SLED MOUNTED CME 45 DRILL RIG (Ref#10417R) Manufactured by CME, fuel tank, 13’L x 8’W x 13’H Price: $14,500
CME AUGER DRILL (Ref#8618T) Ford 300 gas deck engine, mounted on Ford truck, set up for continuous flight auger, tooling and augers Price: $32,500
DEEPROCK DR150 AUGER DRILL RIG (Ref#1685Ta) Mounted on 1993 Ford F700 truck, PTO, 3 winches, slide base, auger rack, toolboxes Price: $42,500
DIEDRICH D-120 (Ref#11401T) Manufactured 2014, mounted on Morooka 1500 with diesel engine, John Deere 4 cyl diesel deck engine, Moyno 3L8 pump, auto hammer, 2000#, 5000# and 10,000# winches, wireline winches, breakout wrench, rod holder, no cathead, no angle capability Price: $239,500
DIEDRICH D120 AUGER DRILL (Ref#2361Tb) Manufactured 2009, Deutz engine (approx. 8500 hours), Moyno 3L8 pump, 800 lb winch, 1000 lb winch, 10,000 lb winch, Mobile Safe-T driver winch and drop hammer, 140 lb auto hammer, mounted on 2009 International 4400 SBA 6x4 truck, Eaton Fuller transmission, 190,533 miles, well maintained Price: $165,000
DIEDRICH D-120 (Ref#6597N) Manufactured 1996, John Deere 6 cylinder diesel deck engine, mounted on 1995 Freightliner with Detroit 12.7 liter engine, flotation tires in front, in-out and side to side slide base, breakout table, breakout wrench, 500 gallon water tank, 140# SPT hammer, cathead, (2) 3000# winches, 10000# winch, set up for mud, rotary or augers, 2 swing out auger racks, 4 leveling jacks Price: $67,500
DIEDRICH D120 (Ref#4885Tc) Manufactured 1994 Price: $77,500
DIEDRICH D120 (Ref#4889T) Manufactured 1991, John Deere inline 6 diesel engine, low hours, 3L8 Moyno, 500 gal tank, cathead, fluted Kelly, 2 auger racks, toolboxes, 4 outriggers, 3 winches (3k, 7k, 10k), mounted on 2001 Sterlilng AT9513 truck, 10 speed, approx. 578,000 miles PRICE: $112,500
DIEDRICH D120 (Ref#4885Tb) Manufactured 1989, Deutz diesel deck engine, mounted on International 10 wheeler with diesel engine Price: $32,500
DIEDRICH D90 AUGER DRILL RIG (Ref#772T) Manufactured 2008, mounted on 2008 Morooka TCX 850 Price: $215,000
DIEDRICH D90 ATC AUGER DRILL (Ref#7309Td) Manufactured 2001, 4240 hours, mounted on all terrain carrier, 2 winches, 3L6 Moyno pump, wiggle tail and slide base, breakout table, breakout wrenches, cathead, 4 large toolboxes, 10’ deck rod rack, under deck auger storage, front winch on carrier, 200 gallon water tank Price: $72,600
DIEDRICH D50 AUGER DRILL RIG (Ref#3388T) Manufactured 2022 (delivered 2023), track mounted, 1400 hours, no tooling Price: $339,500
DIEDRICH D50 DRILL RIG (Ref#242T) Manufactured 2016, track mounted, John Deere 4 cylinder turbo (115 hp) diesel engine, 24” wide rubber 2-speed track, tandem hydrostatic drive pump, in/out and side to side slide base, cathead, front carrier winch, FMC LO6HV water pump, hydraulic rod holder, breakout wrench, right angle drive, 2-speed all rear drive rotary box, Automatic 140 lb SPT hammer, front auger rack, side tooling rack, 4 hyd jacks, main winch, sandline winch, sampling winch Price: $265,000
DIEDRICH D50 AUGER DRILL (Ref#3706Tb) Manufactured 2006, 2400 hours, Moyno 3L6 pump, track mounted, remote model, wiggletail POR
DIEDRICH D50 DRILL RIG (Ref#3298Ta) Manufactured 1999, 4 cyl 115 hp John Deere air cooled diesel, right angle drive, cathead, 2 winches (5000# & 3000#) 140# auto hammer, 2" hex auger, 3L6 Moyno pump, 15' mast, slide base, 300 gal water tank, mounted on 2004 Freightliner, 47,000 miles, 25,000# GVW, toolboxes, drillers platform 3 hyd jacks (2 rear & 1 front) Price: $135,000
DIEDRICH D50 TRACK MOUNTED DRILL RIG (Ref#3298Tb) Manufactured 1999, track mounted, John Deere 4 cyl turbo air cooled engine, 3 winches wireline, chain driven rotary box, hyd oil cooler, hyd. chuck, Moyno 3L6 pump, 435 Bean piston pump, slide base, front auger rack, 250 gal water tank, overhead feed system, extra track included, 2824 hours Price: $125,000
DIEDRICH D50 AUGER DRILL (Ref#3923T) Rebuilt with 1600 hours (new engine, clutch, pressure plate, throwout bearing, right angle drive, rotary box, feed sprockets, cables and bushings, tracks and track drive motors, hydraulic pump drive, interplanetary drive units and JD engine hyd pump) Track mounted, 125 hp John Deere 4 cyl turbo engine, low clearance, cathead, auto hammer, 3hyd winches (2k, 3k, 7k), 3L6 Moyno pump, NPK probe hammer, wiggle tail, slide base Price: $247,500
DIEDRICH D50 AUGER DRILL (Ref#3706Ta) Manufactured 1996, mounted on Marooka MST800, 1959 hours on drill, new clutch recently installed, carrier 4705 hours, drive motor was replaced 2021, Moyno 3L6 pump, set up for rock coring, wiggletail Price on Request
DIEDRICH D50 TRACK MOUNTED AUGER DRILL (Ref#8726Ta) Price: $110,000 CDN
DIEDRICH D50 DRILL RIG (Ref#3452Tb) Manufactured 1990’s, auto hammer, 3 winches, 6 cylinder John Deere diesel engine, mounted on 2013 Hino 268 truck, automatic, approx. 200k miles, used for hollow stem auger and mud rotary wells Price: $62,500
DIEDRICH D50 (Ref#8817T) Manufactured 1987, 4 cyl gas engine on deck, slide base, cathead, unmounted (frame only) was originally skid mounted Price: $23,000
DIEDRICH D50 (Ref#14444T) Early 1980’s, Duetz diesel on deck, mounted on 2002 International 2 wheel drive truck with diesel engine, angle capability, no auto hammer, cathead, water tank, Moyno pump, in/out and side to side slide base, 3 leveling jacks PRICE: $92,500
DIEDRICH D50 AUGER DRILL (Ref#4133T) Manufactured 1995, 19’ mast, 5,000 and 2000 lb winches, auto hammer, breakout wrench, water tank, 4 cylinder John Deere diesel deck engine, mounted on 2006 Peterbilt 335 truck with Cummins engine, Eaton 10 speed transmission, 96,000 miles, A/C, 85% tires, 3 leveling jacks, rig in good shape, bed is rough Price: $92,500
DIEDRICH D50 (Ref#4549T) Deutz 4 cylinder diesel on deck, mounted on all wheel drive 1995 International 4800 truck with diesel engine, no auto hammer but plumbing is there, starts, needs rebuilding Price: $23,500
DIEDRICH D50 (Ref#8559Ta) 3 winch lines, auto hammer, mounted on Morooka MST 1100 Carrier, 2-1/4 and 3-1/4 hollow stem augers Price: $115,000
Similar unit available mounted on Morooka MST-800VD
DIEDRICH D50 AUGER DRILL (Ref#4741T) Manufactured 2014, mounted on Ardco Buggy Price on Request
DIEDRICH D25 TRACK MOUNTED AUGER DRILL (Ref#4264Tb) Approx 3618 hours (still in service), Cat 1.5L 32.7hp diesel engine, auto hammer, track mounted, remote control, Moyno 3L6 pump, no hydraulic breakout wrench no tools or augers, well maintained Price: $137,500
DIEDRICH D25 DRILL RIG PACKAGE (Ref#8097T) Manufactured 2014, track mounted. Lombardini diesel engine. Auto hammer, Moyno 3L6 pump, main winch, front and side auger racks, tool box, rotary hoses, 4 hydraulic jacks, cathead, two mudtanks. Extensive tooling including 2-1/4” HSA, JWJ rod, 3-1/4” HSA, NW drill rod, 5-1/2” auger, NWL BW, HW rod and casing and more (list available) Package Price: $170,500
DIEDRICH D25 (Ref#8857R) Manufactured 2007, brand new Deutz air cooled 4 cylinder diesel deck engine with 500 hours, new clutch, brand new auto hammer, single winch, Moyno pump, 150 gal water tank, mounted on new 2022 Dodge Ram 5500 4 x 4 truck with Cummins diesel engine, 20 miles on truck, new hoses, new bed, no tooling, has drilled 20 – 30’ through ashphalt 50’ through sand PRICE: $118,500
MOBILE B-5500 (Ref#3565R) Manufactured 1995, mounted on 1996 Ford L8000 tandem axle truck with diesel engine, 125,000 miles, multi-purpose dual speed top drive (14,000 ft/lb) drill for augering, mud rotary, or water coring (700 rpm). Long stroke mast (can use casing system or casing hammer), 18” auger capacity, 24” rotary capacity, hydraulic driven 5 x 6” mud pump, Moyno grout pump, water tank Price: $85,000
MOBILE B-3500 (Ref#4968Ta) Manufactured 1995, mounted on 1994 Ford F350 2WD drive, 7.3L diesel engine, PTO, 52,000 original miles, combination auger and direct push, Price: $54,000
Available at extra cost:
2000 FORD F650 FLATBED SERVICE TRUCK, 2 wheel drive, Cat engine POR
MOBILE 92 (Ref#5574T) 135 hp 6 cyl Ford gas deck engine, 84” long slide base, 2 under unit auger racks, mounted on International 510 single axle truck with diesel engine (truck needs body work on floor), water tank available but not on truck, no auto hammer, no tooling Price: $22,500
MOBILE B90 MULTIPURPOSE DRILL RIG (Ref#5138Ta) Reverse Circulation, Coring, DTH and Augering, 5849 hours, Cummins 6BTA 200 p diesel engine on deck, 12,000# main hoist, 900# Safe-T Driver hoist, 4000# auxhoist, 2000# aux/wireline hoist, 17.5’ mast,17.5’ feed stroke, in/out and side to side slide base, auger rack, rod box, single rod loader, hydraulic breakout wrench, Moyno 3L8, Bean pump, air/water/oiler system, mounted on 1991 Ford FT900 3 axle diesel engine, 10 speed transmission Price: 5849 hours on rig, 12,112 miles on truck, located Africa Price: $80,000
MOBILE B-80 (Ref#14638RA) Manufactured 2012, track mounted on Cat carrier with 240hp Cummins diesel engine, only 100 hours, mine setup, 1200rpm high speed spindle, 34gpm Bean injection, 175 gpm Rupe mud pump, 36” stroke, 2750 ft/lb torque @ 200 rpm, 500 ft/lb torque @ 1250 rpm, 4 hydraulic leveling jacks Price (rig only): 425,000 Price on carrier: $525,000
MOBILE B80 (Ref#3035Rc) Manufactured 1997, 375 cfm air compressor, Bean water injection, Moyno pump, mounted on Ford truck with Cat 3126 diesel engine, 300’ of drill rod and core barrels included Price: $94,500
MOBILE B-80 (Ref#3387T) Manufactured 1986, rig has a floating spindle installed for coring, et up for augering and large diameter core drilling, 22’ stroke, in/out slide base, breakout wrench, aux and main winches, no Moyno pump, no water tank, no auto hammer, mounted on 1986 Ford 6 wheel drive with diesel engine (early 1990’s truck), new right angle drive installed, , hydraulic foot clamp rotating, hydraulic breakout wrenches, hydraulic operated arms with winches, no tools Price: $42,500
Price with Bean 35 pump with Duetz diesel engine: $57,500
MOBILE B-80 (Ref#1981N) Manufactured 1986, excellent condition, mounted on Ford 8000 truck with Cat 3208 engine, PTO, hydraulic winch, 22’ stroke, 160# hammer, 300’ of augers, split spoons, slips, AWJ rod, can handle 20’ rod, currently using it for 5’ augers in 20’ sections PRICE: $77,500
MOBILE B-80 (Ref#203N) Manufactured 1982, mounted on Ford LNT800 truck, Deutz diesel 4 cyl deck engine, Ford gas engine in truck, 750/150 Grummer Schmidt screw compressor powered by 8.3 Cummins Turbo engine, 14’ stroke, cathead, 9 gpm Bean water injection, 400’ of 3-1/2” drill pipe with 2-3/8 IF thread, 6” CP hammer, 6” Numa hammer Price: $80,000
MOBILE B80 (Ref#10260T) Manufactured 1978, original owner, Detroit diesel deck engine, mounted on 1981 Brigadier with 6V92 Detroit truck engine, 9 sp transmission, no slide base, 60 gpm Bean pump, 3 winches, 15’ stroke, drop hammer Price: $64,500
MOBILE B80 (Ref#2068Ta) Deutz diesel on deck, set up for auger and core, wiggle tail, sandline, mounted on 1976 International 2WD truck with gas engine, 4 hyd jacks Price: $72,500
MOBILE B80 (Ref#768Tb) Mounted on 6 x 6 Ardco carrier Price: $97,500
MOBILE B-80 (Ref#6844RB) PTO, 2 winches, in-out slide base, Moyno 3L8 pump, no auto hammer, 500 gallon water tank, unmounted PRICE: $38,500
Augers available at extra cost
MOBILE BK-66 (Ref#8237R) Manufactured 1995, Diedrich 140# auto hammer Model 52050, 3L6 Moyno pump, mounted on 1995 Ford F800 (4 x 2) with Cat diesel engine, 4 hydraulic leveling jacks, wiggle tail, slide base, 2 auger racks, toolboxes, 12000# and 4000# winches, 300 gal SS water tank, PRICE: $57,500
MOBILE B-65 (Ref#5167) Manufactured 1970, 30’ mast, mounted on Ford 6 cyl truck w/Pony motor (truck needs work), side base, hyd jacks Price: $30,000
MOBILE B61 HDX (Ref#15107Ta) Manufactured 1991, mounted on 1991 Ford F800 truck, approx 94,000 miles, Cummins deck engine, slide base Price: $64,500
MOBILE B-61 (Ref#3689R) Manufactured 1991, Cummins 6BT deck engine, mounted on 1991 Ford F700 (not 4x4) with new diesel engine, no angle capability, in-out and side to side slide base, Moyno 3L8 pump, 3 winches, hydraulic cathead, no auto hammer or breakout, 300 gallon water tank, 4 hydraulic leveling jacks, owner has removed the automatic and 4 speed off of the rig, sitting but running when parked PRICE: $21,500
MOBILE B61 HDX (Ref#7547T) Manufactured 1990, Cummins 4BT 3.9 diesel engne (100 hp@2500 rpm), 3L8 Moyno pump, 8500# main hoist, 29’ mast, mounted on Ford F800 truck with Ford 7.8L diesel engine (210 hp), 5 speed transmission Price: $84,500
MOBILE B61 HDX (Ref#4238N) Manufactured 1990, Cummins diesel deck engine, 3L6 Moyno pump, 3 speed Clark Model 28000 transmission on deck, mounted on 1990 GMC Brigadier 10 wheller with 671T Detroit, diesel engine, in/out side to side slide base, Moyno pump, no auto hammer, no cathead, safety driver, 200’ of 4-1/4” augers, 120’ of 6-5/8” augers, split spoons, sitting three years Price: $62,500
MOBILE B-61HDX (Ref#15453) Manufactured 1990, Cummins 4BT deck engine, mounted on 1991 Ford F800 truck (not 4x4) with diesel engine, coring head, 250 gallon water tank, safety driver, mainline winch, sandline winch, aux. winch, in/out and side to side slide base, standard mast, 2 auger racks, toolbox, breakout wrench, 3 hyd leveling jacks, rotary head needs work, needs new bearings and seals, no Moyno pump, rust on deck Price: $80,000
MOBILE B61HDX (Ref#5637T) Built 1991, Cummins 4BT deck engine, slide base, wiggle tail, wireline winch, plumbed for 3 more winches, no Moyno pump (but plumbed for one), water tank, (2) swing out auger racks, 3 leveling jacks, no auto hammer, mounted on 1991 Ford L8000 truck with 270 hp Ford engine, approx. 195,000 miles, Clark 28000 transmission, no rust, right angle drive needs repair (out of rig – has broken tooth – no chatter when running, took off to run another rig under repair), truck is hard to get in high gear PRICE: $47,500
MOBILE B61HD AUGER DRILL RIG (Ref#9045T) Manufactured 1989, 3.9L 4-cylinder Cummins diesel deck engine, mounted on 1989 ford F900 ruck with diesel engine, 171,000 miles, Moyno 3L6 pump, Safety driver winch and hammer, Automatic SPT Geotech hammer, rod clamp, main winch, auxiliary winch, cathead, slide base, wiggle tail, pipe rack, toolboxes, 400 gallon poly water tank, 3 leveling jacks, 8900 ft/lb torque, 92 – 583 rpm Price: $52,500
MOBILE B61 (Ref#12374T) Manufactured 1989, Cummins 4BT diesel engine, cathead, 2 winches, 3L8 Moyno pump, breakout wrench, rod holder, mounted on 1989 Mack diesel motor, 12,238 miles PRICE: $92,500
MOBILE B-61 AUGER RIG (Ref#7269Ta) 6 cylinder Ford gas engine, mounted on 1979 Ford 9000 tandemax axle truck, new Cat 3208 diesel engine and clutch, Road Ranger transmission, 65’ hollow stem augers, slide hammer, set up for split spoon soil augering (split spoon sampler or inner rod for split spoon not available) Price: $23,500
MOBILE B-61 HDX (Ref#6844RA) Cummins 6BT deck engine, mounted on 2002 International 4800 with DT466 engine, in-out and side to side slide base, no auto hammer, Moyno 3L6 pump, 12000# and 4000# winches, 500 gallon water tank PRICE: $98,500
Augers available at extra cost
MOBILE B61 (Ref#12732T) Manufactured 1988, Moyno 3L6 pump, Bean 35 pump, hydraulically driven rig, hydrostatic drive, 3 winches, 30’ mast, new hydrauliuc pump, no auto hammer, no cathead, no water tank, breakout wrench, Longyear auto chuck,drill head rrecently rebult, 4 cyl Cummins deck engine, in-out slide base, mounted on 1983 Ford 8000 6 x 6 truck with Cat diesel engine, hyd foot clamp, 3 leveling jacks, ready to work Price: $57,500
MOBILE B-61 (Ref#14474Ra) Manufactured 1986, gas deck engine, mounted on 1986 Ford F750 (not 4x4) with gas engine, rig does not work and truck does not start
1979 SCHRAMM AIR COMPRESSOR (Ref#14474Rb) 450cfm/350psi, Detroit V8 engine, mounted on 1982 International truck
PACKAGE PRICE: $27,500
MOBILE B61 HDX (Ref#8086T) Manufactured 1985, set up for auger and coring, 4 x 5 Gardner Denver mud pump, Detroit 353 deck engine, auto hammer, slide base, hydraulic breakout, mounted on 2001 Freightliner truck wityh Detroit engine, no angle capability, 100' flight auger, coring equipment and subs Price: $47,500
MOBILE B61 HD PACEMAKER (Ref#12037R) Manufactured 1985, 18” hydrauluic on-off hole slidebase, oil cooler, 29’ mast assembly including twin hydraulic cylinder raise and lower, 4 line crown block, tie down mast support, Cummins 239 CID 100 hp diesel engine, 2” hex undersal auger coupling, 2600# hydraulic hoist with 100’ of 5/16” cable, 1200# wireline hoist with 3/16” cable, safety hook, manual safe-T-driver hoist with 100’ of 1/4” cable and hook, 2500# cathead assembly, Moyno 3L6 pump, hydraulic rod clamp w/jaws for NW – NW casing, hydraulic breakout wrench assembly, hydraulic control valve for water pump, 1-1/4” mast standpipe, sideways hydraulic slidebase, tool boxes, auger/rod racks, tilt cab, mounted on Ford F700 4 x 2 truck, with 370 gas engine, Spicer transmission Price: $60,000
MOBILE B61 HDX (Ref#8238Rb) Manufactured 1984, 300 Ford 6 cylinder engine on deck, Gardner Denver air compressor, cathead, mounted on 1991 International 4900 truck with diesel engine, Needs work Price: $32,500
MOBILE B61HD (Ref#15007T) Manufactured 1980’s, trailer mounted, Ford 6 cyl gas engine, cathead, in/out slide base, 2 winches, Acker chuck head, 3 leveling jacks Price: $44,000 CDN
MOBILE B61HD DRILL RIG (Ref#3853Tc) Mounted on Ford F800 diesel truck Price on Request
MOBILE B-61 (Ref#4912Tb) sitting two years POR
MOBILE B61 (Ref#1778Tc) POR
MOBILE B61HD (Ref#15452N) Engine, Mast, Augers, Complete, Truck needs work Price: $95,000
MOBILE B61 (Ref#3198T) Refurbished, new hoses, repaired right angle drive, POR
MOBILE B60 AUGER DRILL (Ref#8461T) 7140 hours, high speed rotary box, 26’ mast, Cummins Tier II turbo engine, 4 speed power shift transmission, 15” in/out slide base, 12” side to side slide base, hydraulic breakout wrench, hydraulic rod clamp, 36 gallon fuel tank on deck, 250 gallon water tank, 8500 lb main hoist, 4500 lb aux hoist, 1200 lb wire line hoist, ASTM D1586 automatic SPT hammer, toolboxes, mounted on 2005 International 7600 6x4 truck with Cat C11 Acert, Twin Turbo 325 hp, approx. 164,000 miles, 10 speed Eaton transmission, 3:73 gear ration, 11R 22.5 tires, 12000 steer axle weight, 40,000 rear axles weight, 4 leveling jacks Price: $195,000 CAD
MOBILE B-59 (Ref#4912Ta) Mounted on 1993 International truck with Cummins diesel engine, no auto hammer, freefall, 4 winches, in/out and side to side slidbebase, no cathead, 350 gal water tank, 3L10 Moyno pump, excellent condition Price: $62,500
MOBILE B59 (Ref#12463T) Manufactured 1991, Cummins diesel on deck, 3L6 Moyno pump, in/out and side to side slide base, mounted on Ford F800 with Cummins diesel engine, auger racks, sitting since 2013, starts and runs Price: $87,500
MOBILE B57 (Ref#768Tc) Mounted on 6x6 Ardco carrier, Cummins 4BT 3.9 engine, auto hammer, new tires Price: $190,000
MOBILE B57 AUGER DRILL (Ref#7293T) Manufactured 1979, Refurbished 2013, Cummins 300 4BT diesel engine replaced again in 2018 (approx. 6500 hours), transmission replaced 2021, lower valve bank replaced with modern valve bank, mounted on 2008 2 wheel drive Freightliner M2 (295,000 miles), driller’s platform, 3L6 Moyno pump, 250 gal steel water tank, extra toolboxes under tank, auto hammer, no cathead, 2 side mounted swing out auger racks, swing out speed auger rack on back of drill, in/out and wiggletail slide base, 3 leveling jacks, 3 hydraulic work hoists (main 8500 lb, aux 4500 lbs, WL 900 lbs), breakout wrench Price: $67,500
MOBILE B-57 AUGER DRILL RIG (Ref#8195T) Manufactured 1991, gas deck engine, 250 gal water tank, cathead, in/out and side to side slide base, no pump, no autohammer, mounted on 1995 Ford F700 single axle truck (not 4 x 4) with gas engine Price: $39,500
MOBILE B57 AUGER DRILL RIG (Ref#3314Ta) Ford Industrial 300 gas deck engine, cathead, sandline, winch line, no pump, mounted on Ford truck, 3 hyd leveling jacks, fold out auger racks Price: $37,500
Augers available at extra cost
MOBILE B57 (Ref#2842N) Manufactured 1991, Ford 300 6 cylinder gas deck engine, mounted on 1990 Ford F700 (not 4x4) with 429 gas engine, cathead, in-out and side to side slide base, no auto hammer, Moyno 3L6 pump, 250 gallon water tank, pipe racks, auger racks, toolboxes, new hydraulic cylinders, cab and chasis recently painted PRICE ON REQUEST
MOBILE B57 AUGER DRILL (Ref#4600T) Two available
(1) Mounted on mud buggy with gas engine, 2 winches, diesel deck engine, no auto hammer, sitting since 2023 and running when parked.
(1) Mounted on 1989 Ford F700 single axle truck with gas engine, Ford deck engine, automatic hammer, 2 winch lines, extruder, Moyno water pump, 1 front and 2 rear leveling jacks, sitting several years without engines starting
Price for both rigs: $115,000
MOBILE B57 (Ref#2600N) 2 available, both rigs have been sitting a long time and do not start, parts rigs, manufactured 1989, mounted on Ford F700 truck with Ford gas engine, safety driver, 3L6 Moyno pump, hydraulic breakout wrench, in/out side to side slide base, auger racks, 3 jacks, 140# auto hammer, (1) working, (1) needs new engine in truck Price for both: $28,500
MOBILE B57 AUGER DRILL (Ref#1682T) Manufactured late 1980’s, mounted on 1994 International single axle dually with diesel engine, diesel engine on deck, in/out and side to side slide base, auto hammer, cathead, no angle capability, 3 hydraulic leveling jacks, includes (16) 8” hollow stem auger, (2) 2” split spoon samplers, running condition POR
MOBILE B57 (Ref#7889T) Mounted on off road vehicle, Cummins diesel engine, 3 winches, cathead, no auto hammer Price: $77,500
MOBILE B-57 (Ref#4912Tc) mounted on buggy POR
MOBILE B57 (Ref#8669T) Manufactured 1994, New Ford 300 Commercial deck engine, mounted on 1994 Ford F800 truck (just serviced by dealer, new brakes), 125,000 miles, runs good, automatic transmission, new tires, Moyno 3L8 mud pump with new hydraulic motor, 3 winches, cathead, auger racks, water tank Price: $31,500
MOBILE B57 (Ref#9992R) Manufactured 1988, 3L4 Moyno pump, side to side slide base, cathead, no auter hammer, auger racks, toolboxes, 250 gal water tank, 1 winch, 3 jacks, mounted on 1988 Ford F600 4 x 4 truck engine with diesel engine, Ford Henry 4 cyl gas deck engine, 80’ of 4-1/4” auger, 20’ of 6-5/8” auger. Runs but will need some work Price $40,000
MOBILE B57 AUGER DRILL (Ref#4283T) Rig runs, truck not DOT worthy, truck will start but will have to be trailered Price: $24,500
MOBILE B57 AUGER DRILL RIG (Ref#2831Ta) Izuzu diesel engine in Marooka carrier, Cummins 4BT deck engine, in/out slide base, cathead, 140# auto hammer, breakout wrench, no angle capability, no water tank, 3 hydraulic leveling jacks Price on Request
MOBILE B57 AUGER DRILL RIG (Ref#2831Tb) Hino diesel engine in Marooka carrier, Cummins 4BT deck engine, in/out slide base, cathead, 140# auto hammer, breakout wrench, no angle capability, no water tank, 3 hydraulic leveling jacks Price on Request
MOBILE B57 AUGER DRILL (Ref#9339T) Price on Request
MOBILE B-56 PARTS RIG (Ref#3995N) Manufactured early 1970’s, Ford 4 cyl gas deck engine, mounted on 1979 Ford truck (not 4x4) with gas engine, cathead, 2 winches, in/out slide base, auger racks, no Moyno pump, no auto hammer, sitting over 10 years Price: $9,500
MOBILE B-56 (Ref#11448Ra) Manufactured 1970, mounted on 1994 International 4900 truck, DT466 engine, 500 gal water tank, Moyno pump, cathead, 1 winch, slide base, 2 pullout auger racks Price: $35,500
MOBILE B-54 AUGER RIG (Ref#1279Ta) Manufactured 2010, mounted on IHI carrier, 3 winch system (main, auxiliary and wireline), auto hammer, slide base, overhead water swivel, 300 gallon water tank, American Manufacturing piston pump, 8 speed head (max 897 rpm / 8400 lb torque), 13’ feed stroke, 24,000 lbs of retract, 16,000 lbs pulldown, breakout table and wrench, approx. 2800 rig operating hours (meter advances but seems low), leveling jacks Price: $189,500
Available at extra cost:
35 TON KAUFMAN DETACHABLE GOOSENECK TRAILER (Ref#1279Tb) Air ride, dovetail package, 66,000 GVWR, frame is 4 cambered main beams fabricated with 100 KSI (t1) and 80 KSI high tensile steel, 36” steel dovetail with traction cleats, Removable hydraulic tongue-non-ground bearings gooseneck with 3 position adjustable load blocks and 89” – 107” available swing clearance (standard set up for wet line), SAE 2” Kingpin couple (16” Kingpin setting), forged A-rig tie downs, 25’ deck length, 102” deck width, 24” deck height, brakes all shweel 16.5” x 7” air brakes, automatic slack adjusters and 4S/2M ABS, (2) 25,000 lb axles (5” round, 5/8” wall thickness), air ride suspension. Price: $86,500
2000 WESTERN STAR 4900 (Ref#1279Tc) 6 cylinder, approx. 588,200 miles
Package Price: $290,000
MOBILE B53 DRILL RIG (Ref#8034T) Manufactured 1990, mounted on Gemco GT300 4 x 4 articulating log skidder with 4 cyl Detroit 453 diesel engine, PTO, front winch, cathead, side to side slide base, no Moyno pump, auger racks, 10’ side rack, 60 gal water tank, 140# safety/slide hammer, set up for 6-1/4” auger, 2 rear jacks, running condition Price: $25,000
MOBILE B53 (Ref#11889Ta) mounted on Ardco buggy, Detroit diesel, angle capability, Moyno pump, in-out slide base Price: $44,500
MOBILE B53 (Ref#8442R) Manufactured 1989, mounted on 1986 Bombadier, Perkins diesel motor, side to side slide base, 3L6 Moyno pump, no autohammer, 2 winches, no cathead, 3 leveling jacks Price: $55,000
MOBILE B-53 (Ref#8781T) Manufactured 1986, mounted on 1986 Ford F700 4 x 4 truck, 8.2 Detroit diesel, PTO, 171,000 miles, 25’ auger, 3 cutterheads, in and out slide base, cathead, no Moyno pump PRICE: $29,500
MOBILE B53 (Ref#8739Nb) Manufactured 1985, Mounted on 1985 Ford F700 (not 4x4) w/ 7.3L diesel engine, PTO, slide base, cathead, no auto hammer Price: $49,500
MOBILE B53 (Ref#774T) Manufactured 1995, Refurbished 2012, auto hammer, in/out slide base, 2 working winches, third winch needs to be rebuilt, auto hammer, 3L6 Moyno pump, no water tank, no breakout wrench, mounted on 1995 Ford F800 4 x 4 truck with new diesel engine (300 hours), PTO Price: $52,500
MOBILE B-53 (Ref#9752Na)Unmounted, Manufactured 1980, 353 Detroit deck engine, hydraulic chuck, extended mast, in-out slide base, cathead, mainline, sandline & wireline winches, no auto hammer, 435 Bean pump, underbody swing out auger rack, toolbox, no water tank, 3 hydraulic leveling jacks PRICE: $31,500
MOBILE B-53 (Ref#13469) Manufactured 1979, mounted on Ardco JXF buggy, 425 Bean pump, 3 hoists 7000#, 2900# and safety driver, new hydraulics, PTO, Detroit diesel in buggy, 250 gallon water tank, 20,000# winch on front PRICE: $32,500
MOBILE B-53 (Ref#6188T) Mounted on 1978 International 4 x 4 truck, 300’ of drill rod, 5 drill bits Price: $63,500
MOBILE B-53 (Ref#10342R) Manufactured 1977, Ford 300 gas deck engine, mounted on 1977 Ford F600 4x4 with gas engine, cathead, in-out slide base, 1 winch, no auto hammer, no water tank, no Moyno pump, leveling jacks Price on Request
MOBILE B-53 (Ref#10054Td) Manufactured 1975, mounted on Bombadier Musket crawler, cathead, 4 leveling jacks, hyd winch, mechanical winch on carrier Price: $39,500 CDN
MOBILE B53 (Ref#1128Tb) Manufactured 1979, mounted on Wood Tiger Cub Model M114 with gas engine, cathead, 2 winches Price: $32,500
MOBILE B53 DRILL RIG (Ref#1872T) Unmounted, includes mast, controls, drive head. Needs new hoses and hydraulic pump, was PTO setup Price: $9,500
MOBILE B52 AUGER DRILL RIG (Ref#8696T) Ford straight 4 gas deck engine, mounted on Chevy 3500 dually 4wd with gas engine, will also sell unmounted Price: $16,500
MOBILE BK51 (Ref#2429N) Manufactured 1990, completely refurbished, 3 cylinder Duetz diesel deck engine, mounted on 1990 Ford F700 4x4 with gas engine, cathead, in-out and side to side slide base, 3L6 Moyno pump, 500 gallon water tank, no auto hammer, toolboxes, rod racks, 1 front & 2 rear hydraulic jacks PRICE: $31,500
Tools & augers available at extra cost
MOBILE BK51 HDT (Ref#6015T) Drill manufactured 1998, Deutz air cooled 230 C.I.D. diesel engine, 4 speed transmission, 5,000 ft/lbs spindle torque, 5,000 lb hydraulic hoist with speed of 65 ft/min, 1300 lb hydraulic wireline hoist 350 ft/min, 8” cathead with 5000 lb capacity, mounted on trailer. Trailer rig weight 8,640 lbs, 15’L x 69”W, traveling height 9’, mast is 15’ from sheave centerline to base of drill frame. Rig is in working order. It has some minor hydraulic leaks and needs a mud pump. It is configured for a 3L6 Moyno pump. Price: $33,500
MOBILE B-50 (Ref#4186T) Rebuilt 1984 (at Mobile), 6 cyl gas deck engine (replaced 2004), safety driver, Moyno pump, extended mast to 20’ (extended by Mobile), mounted on 1984 F700 awd truck with gas engine, cathead, aluminum toolboxes, auger racks, 40’ of 6-5/8” hollow stem auger, last drilled Feb 2019 Price: $29,500
MOBILE B-50 (Ref#782N) Manufactured 1977, set up for auger and coring, track mounted on 1970 IH-TD8C engine, 6 way hydraulic blade, cathead, sandline, 5000# Braden hoist, hydraulic Bean injection pump, good condition PRICE: $40,000
MOBILE B-50 (Ref#3406N) Manufactured mid 1970’s, mounted on 1963 Chevy C60 series truck (truck needs work) 235hp 6 cyl engine, PTO, tophead swivel for air and mud, in/out and side to side slide base, cathead, tailout line, 50’ of 6” auger, 90’ of 2-5/8” drill pipe, 20’ of 8” overdrive drill casing, 6” and 8” cutter bit, outriggers on rear end, aux hydraulic tank PRICE: $32,500
MOBILE B47 AUGER DRILL RIG (Ref#619Tb) Manufactured 1995, Deutz ediesel engine, cathead, winch, hydraulic driven, Marooka carrier, no leaks, runs great Price: $87,500
MOBILE B47 (Ref#9832R) mounted on 1990 Inrternational truck with diesel engine, all wheel drive Price: $60,000
MOBILE B-47 (Ref#3718R) Manufactured 1984,mounted on 1984 International truck with diesel engine, PTO, StP hammer, side to side slide base, no tooling PRICE: $49,500
MOBILE B47 (Ref#8479T) Manufactured 1984, no pump, mounted on 1984 Ford F700 truck with diesel engine, PTO, in and out slide base, not side to side slide base, 2 winches, cathead, STP hammer Price: $47,500
MOBILE B47 (Ref#12803T) Set up for auger and coring, Moyno 3L6 pump, mounted on GMC Topkick, PTO, Mobile auto hammer Price: $37,500
CME auto hammer available
MOBILE B47HD (Ref#8727T) mounted on truck Price: $100,000
MOBILE B40L (Ref#13525T) Manufactured 1978, in-out slide base, 2 lines (winch and freefall line), slide base, no cathead or sandline, no water tank, 32’ mast, mounted on 1978 Ford 8000 truck with Cat engine, PTO, 3 jacks, currently drilling Price: $62,500
MOBILE B-40L (Ref#4521R) Manufactured 1972, original owner, PTO, mounted on 1972 Ford LN8000 with Cat 3208 diesel engine, slide base, cathead, 3 leveling jacks, 140’ of 20’ hollow stem augers, carousel, water tank, 125 cfm air compressor rig, ready to go Price: $69,500
MOBILE B47 DRILL RIG (Ref#5453Tb) Mounted on 2wd Ford 650 truck with diesel engine, in/out and side to side slide base, cathead, 500 gallon water tank, no auto hammer, some rods and tools Price: $62,500
MOBILE B-40 (Ref#4155N) Duetz diesel deck engine, mounted on Ardco buggy with Ford 300 gas engine, flotation tires all around, cathead, 200 gallon water tank, 20’ mast, no slide base, Shelby tube extractor, currently drilling Price: $45,000
Available at extra cost: lowboy trailer, tools
MOBILE B40L AUGER DRILL (Ref#10124T) Mounted on 1999 International truck Price: $47,500
MOBILE B40 DRILL RIG (Ref#323Ta) Mounted on single axle International truck with DT466 engine, PTO, in/out slide base, no pump, no water tank, no cathead, no sandline, 2 rear hydraulic leveling jacks, located Canada Price: $52,500 USD
MOBILE B40H (Ref#1128Ta) Manufactured 1969, mounted on 1990 Ford F700 single axle truck (approx. 96,000 miles), Ford 6.8L engine, Eaton Fuler manual transmission, 2 speed rear axle, 300 gal water tank Price: $14,500
MOBILE B40 (Ref#9654Ta) Manufactured early 1980’s, new Merecedes diesel 180 hp deck engine just installed, 13’ stroke, no slide base, no auto hammer, 13’ stroke, mounted on 1996 International truck with diesel engine, currently working Price on Request
MOBILE B40L (Ref#4455Ta) Manufactured 1984, 6 cylinder gas engine on deck, 17’ stroke, Moyno 3L6 pump, spudder system, mounted on 1984 tandem axle International truck with DT466 diesel engine, 500 gallon water tank, 4 leveling jacks, air brakes, CDL required Price: $51,500
MOBILE B40H (Ref#4455Tb) Manufactured 1960’s, 5’ stroke, 2L4 Moyno pump, 200 gallon water tank, cathead, 4 speed gear box, mounted on single axle truck (needs new truck), 3 leveling jacks Price: $19,500
MOBILE B33 (Ref#2487T) Mounted on 2 axle trailer, Ford Industrial 4 cyl deck engine, front to back slide, winch, cathead, rig is gearbox and kelly driven, timing is off but rig starts and runs Price: $19,500
MOBILE B31 (Ref#6249T) Mounted on Ford F700 2-wheel drive truck with diesel enigne, PTO Price on Request
MOBILE B30 AUGER DRILL RIG (Ref#4555T) Mounted on 1998 Freightliner truck (roadworthy), deck engine gone through in 2019, 30’ of 4” auger and tooling Price: $52,500
MOBILE B30S (Ref#2486T) 24’ boom, modified to side to side and front to back, mounted on 1990 Ford F450 truck, 7.3 diesel engine, approx. 75000 miles, sitting since 2000, broken windshield, 2 new batteries, 2 new front tires Price: $15,500
MOBILE B-30 (Ref#12932R) Manufactured 1972, made to fit a 3 point hitch up, sits on back of tracks, PTO, stored inside Price: $18,500
MOBILE B24 LOW CLEARANCE AUGER RIG (Ref#4201T) Manufactured 1994, good for low clearance, only 180 hours, Detuz Z790 diesel deck engine, cathead, rig mounted on square box frame with jacks, working condition Price: $15,500
Tooling available at additional cost
MOBILE B21 (Ref#3881NB) mounted on Ford 1 ton truck with 390 gas engine, rod rack, 3 hyd jacks, no pump, new bearings, new chains, no tools Price: $16,500
MOBILE MINUTEMAN (Ref#1461T) Manufactured 2010, gas engine, electric start, self-contained unit Price: $18,500
MOBILE MINUTEMAN (Ref#12740Tb) Briggs & Stratton 10 hp gas engine, Acker Tripod with Briggs & Stratton 8 h gas engine, cathead, used for sampling, misc parts Price: $13,500
MOBILE MINUTEMAN (Ref#4885Th) Manufactured late 1980’s, runs 30’ mobile augers and center rods Price: $11,500
MOBILE MINUTEMAN (Ref#8820RB) Manufactured 1980’s, gas engine, good condition Price: $9,500
TMG BOXER DRILL ATTACHMENT (Ref#189T) Manufactured 2012, 50 hp engine, unmounted, 4’ mast with 5’ adapter extension for mast (skid steer, auger attachment and forklift attachment not available) Price: $16,500
TMG AUGER DRILL RIG (Ref#3080T) Built 2019, ML Series head, 74 hp, 9168 ft/lb torque, 4 speed gear box drill head, 1000-1500’ depth capacity, 74 hp Tier 4 turbo charged diesel engine, mounted on 2012 Ford F750 4x2 Truck with Cummins diesel engine, non CDL Price: $152,500
TMG-37 AUGER DRILL RIG PACKAGE (Ref#2932T) Manufactured 2022, track mounted, 20 rpm rotary drill head, 3500 ft/lbs torque, 37 hp Kohler gas air-cooled engine, 140# hammer, 39” drop height, confirms to ASTM D-1586 for SPT sampling, mini winch tower, high force extraction cylinders with 48000 lb lift force, rubber tracks, wired remote, NON CDL
50’ of 2” SPT rod
Price for rig and SPT rod: $87,500
SIMCO 5000 (Ref#6549Ta) Manufactured 1978, Ford 300 deck engne, 3 x 4 Mission mud pump (250 hours), no air, set up for water well and geothermal, 180’ of 3-1/2 x 15’ rod (2-3/8 IF), mounted on Ford 9000 with Cat 3406 engine Price: $48,500
SIMCO 5000 (Ref#4697R) Manufactured late ‘70s, PTO, mounted on Ford 9000 with diesel engine, dual topheads, 5 x 6 hydraulically driven mud pump, (3x4 centrifugal also avail) hydraulic cooler, no cathead, developmental air compressor, rod spinner, 4 hydraulic leveling jacks, rig needs new transfer case Price: $65,000
SIMCO 4000 (Ref#3464R) Manufactured 1988, unmounted, 8 speed drill head, mud pump, no drill table, no breakout wrench, needs some work, does not start Price: $12,500
SIMCO TR2-4000 DRILL RIG (Ref#4290T) Built 1995, Deutz diesel engine, track mounted Price: $37,500
SIMCO 2800 DRIL RIG (Ref#7306T) Manufactured 2023, 185/150 Vanair developmental air compressor on rig, 2 x 3 centrifugal mud pump (400 fpm max/250 psi), mounted on 2022 Dodge 5500 4x4 truck with 6.7L Cummins Turbo diesel, PTO, in/out slide base, no cathead, no auto hammer, rack for 240’ drill pipe, 290’ drill pipe included, mud pan assembly 315 miles, 105 run hours Price: $310,000
SIMCO 2800 DRILL RIG (Ref#6560T) Manufactured 2001, Mounted on Ford Super Duty, PTO (new), rebuilt 2 x 3 centrifugal mud pump, mud pan, pipe rack, 200’ of 10’ rods, currently working Price: $107,500
SIMCO 2800 HS/HST DRILL RIG (Ref#5542T) Manufactured 1987, track mounted, air cooled 3-cylinder diesel engine (freshly rebuilt, less than 16 hours), 30’ mast, 1 hydraulic front jack, King swivel Price on Request
SIMCO 2800 (Ref#7201R) Manufactured 1980’s, mounted on Ford truck with no engine, single line winch, set up for augering, in-out and side to side slide base, cathead, auger racks, 1 front & 2 rear hydraulic leveling jacks, no mud, no tools PRICE: $11,500
SIMCO 2800 (Ref#11729Tb) Manufactured early 1970’s, 5' stroke, trailer mounted with 4 cyl Wisconsin gas engine, 2 winches, no jacks, in/out slide base Price: $11,500
SIMCO BOOM (Ref#13687Tb) 11’ stroke (mast only) POR
SHOP BUILT RIG (Similar to Simco 2800) (Ref#8967Ra) Manufactured 2003, mounted on 2004 Ford F650 truck with Cat C7, centrifugal pump, 40’ auger, 60’ drill rod, safety hammer, PTO, 60,000 miles on truck (Oct 2015) Price: $77,500
SHOP BUILT RIG (Similar to Simco 2800) (Ref#8967Rb) Manufactured 2007, mounted on 2004 Ford F650 truck with Cummins engine, centrifugal pump, 40’ auger, 60’ drill rod, safety hammer, PTO driven Price: $87,500
SIMCO 2400 DRILL RIG (Ref#2427T) Manufactured 2020, mounted on 2020 Marooka 600 with diesel engine, 10’ stroke, 3 cyl deck engine, plubed for mud pump, bare rig with no tools Price: $292,500
SIMCO 2400 (Ref#7935Ta) Manufactured 1996, Kohler 34 gas deck engine (California compliant), set up for geotechnical, in/out slide base, mounted on 1985 Chevy 2 wheel drive with diesel engine, cathead, winch, no auto hammer, No Moyno pump, fully operational, (Available at extra cost: Shop built portable Geoprobe, good for limited access) Price: $39,500
SIMCO 2400 DRILL RIG (Ref#1080T) 10’ stroke, Cummins engine (new 2017) on deck, mounted on Ardco chassis with Duetz engine installed 2018 but engine is burnt, winch, new hydraulic hoses 2017, toolbox Price: $40,000
SIMCO B2400-SK1 (Ref#8065T) Totally rebuilt. Wisconsin 4-cylinder gas deck engine, 140lb hammer, winch, cathead, mounted on 1999 Chevy Dually 1-ton 4 x 4 truck with gas engine, extended mast, auger rack, under box storage, two open valves to add on other tooling possibly an auto hammer for SPT testing
Rebuilt:
Frames inspected scraped, rust removed and undercoated
Truck brake lights replaced
Drill engine flushed and tested and necessary items replaced
Rig engine has new starter motor
New hydraulic pump and hydraulic hoses.
New winch cable
Rig sandblasted, repaired and painted
New hydraulic fluids and filters
New pressure gauges installed
New hydraulic ram to raise and lower mast installed, mast slide rails replaced
New rig starter key
Tooling/auger and rod included:
25’ of Diedrich 3-1/2" solid stem flight augers
25’ of Diedrich 3-1/4" hollow stem augers
(2) 2” split spoons with split spoon extender
4" x 4' Shelby tube with drive rod
25’ threaded drill rod
2 cutting heads for 3-1/4” HSA
Winches,
Connecting bolts and pins,
Cats eye for rod hoisting,
Kwik Klamp for rod holding
Safety shoe for auger removal
Package Price: $92,500
SIMCO 2400 DRILL RIG (Ref#4313T) Mounted on 2009 Ford F550 2WD truck with 6.4 power stroke diesel engine, approx. 151,300 miles, hydraulic air compressor, sliding platform, gas deck engine, percussion hammer, good running condition but has a minor hydraulic leak Price: $27,500
SIMCO SK2400 AUGER DRILL (Ref#2047T_simco) Manufactured 2005, truck mounted Price: $29,500 USD
SIMCO 2400 AUGER DRILL (Ref#4972T) Manufactured 1997, John Deere diesel on deck, 10' stroke, high speed drilling for coring, mounted on 1997 Dodge Ram 3500 4 x 4 with Cummins diesel, dual wheels in rear, 42,000 original miles, 3 leveling jacks, Moyno Pump, in/out slide base, Geoprobe hammer, 50' Augers, 2" core samplers Price: $41,500
SIMCO 2400 SK1 (Ref#6258T) Manufactured 1990, approx 1400 hours, single speed drill head set up for auger and air rotary drilling, VG4D Wisconsin rig engine, mast extension with cathead rope shive, cathead, air/water swivel, universal joint for auger drilling, breakout wrench, leveling jacks, tool boxes, rod rack, mounted on Yanmar C25R rubber tracked carrier with 3 cylinder Yanmar diesel, custom made flat bed body. Includes 28' 4 1/4" HSA with 2 cutter heads, 52' of NWJ rod and Atlas Copco down hole hammer with 4" bit. Fully functional Price: $45,000
SIMCO 2400 TRACK MOUNTED AUGER DRILL RIG (Ref#5453Tc) Diesel engine, cathead, track mounted, no auto hammer Price: $57,500
SIMCO 2400 (Ref#13919Rb) mounted on trailer, needs work POR
SIMCO EARTHPROBE 200 (Ref#15533) Manufactured 1997, Kohler 18 hp gas engine on deck, mounted on 1997 Ford F250 w/powerstroke diesel, good condition, last used 2004, been in storage, hammer rebuilt 2020 and never used, no hydraulic pump, no tools or augers Price: $28,500
SIMCO EARTHPROBE 200 (Ref#13552) Manufactured 1994, unmounted, Kohler engine, no hour meter, includes rods and samplers PRICE: $8,500
SIMCO EARTHPROBE 200 (Ref#6844RC) direct push unit, gas engine, mounted on Pug 4x4, (2) available Price: $21,000 each
Augers available at extra cost
(Ref#6844RD) 30’ of 12 1/4” ID HSA
55’ of 10 1/4” ID HSA
2” hex bits
INGERSOLL RAND A-300 (Ref#5938) Manufactured 1994, 3L6 Moyno pump, Mounted on 2016 Ford F650 (not 4x4) with Cummins engine, PTO, 3 jacks, 19’ telescoping mast, 8’ head travel 8,000 ft/lb, hoist, cathead, slide base, in-out, side to side slide base, wiggle tail, 150 gal water tank, (2) auger racks, (2) tool boxes PRICE: $95,000
INGERSOLL RAND A300 AUGER DRILL RIG (Ref#7309Ta) Manufactured 1994, 8873 hours, mounted on 2006 International 4300 truck with approx 89,200 miles, 2 winches, 3L6 Moyno pump, slide base with cross slide head, probe hammer, cathead, 10’ drill stroke, fixed monopole tower, 10’ rod rack and 2 underdeck auger racks, 8000 ft/lb torque top head drive, 6000 psi hydraulic pump, 300 gal water tank, 22’6” working height Price: $52,500
INGERSOLL RAND A300 AUGER DRILL RIG (Ref#7309Tb) Manufactured 1994, approx 9000 hours, mounted on 2007 International 4300 truck with approx 98,500 miles, 2 winches, 3L6 Moyno pump, slide base with cross slide head, probe hammer, cathead, toolboxes, under deck auger racks, telescoping tower, 8000 ft/lb torque top head drive, 6000 psi hydraulic pump, 300 gal water tank, 16’ working height Price: $47,500
INGERSOLL RAND A300 AUGER DRILL RIG (Ref#7309Tc) Manufactured 1993, 8855 hours, mounted on 2006 Ford F650 truck with 233,500 miles, 3L6 Moyno pump, telescoping tower, 1 winch, underdeck auger racks, 10’ rod storage, 1 winch, telescoping tower200 gal water tank Make Offer
INGERSOLL RAND A-300 (Ref#3529N) Manufactured 1993, mounted on 1993 Ford truck with diesel engine, PTO driven, cathead, 2 winches, 3L8 Moyno pump, in/out slide base, head moves side to side, has duel head (one for augers and one for coring), telescoping tower can be used for low clearance, high rail gear (can be used on railroad tracks), good running condition, no tools PRICE: $42,500
INGERSOLL RAND A-300 (Ref#3798N) Manufactured 1992, mounted on 1992 Ford F700 single axle truck, 3 leveling jacks, 6.6 ltr diesel engine, PTO, 8,000# and 6,000# winch, 12’ mast, 18,000# pulldown and pullback, 16” sliding base, cathead, 3L6 Moyno pump, 100 gallon water tank, built-in auger racks, safety hammer (not auto hammer), 40’ of AWJ rods, core barrel
Price rig only: $30,000 Price with truck: $40,000
INGERSOLL RAND A-200 AUGER RIG (Ref#2871T) Built 1984, trailer mounted, 10’ stroke, Perkins/Detroit diesel engine, safety hammer, includes 20’ of 3-1/4” hollow stem auger Price on Request or Make Reasonable Offer
ACKER SOIL MAX AUGER DRILL RIG (Ref#3298Td) Manufactured 1993 (one owner) angle drilling, Deutz diesel 6 cylinder, air cooled, electric start, 8 speed (11,600ft lbs torque) quick disconnect chuck, 2" swivel attachments, roller chain, 4-5/8 hollow bore spindle, 140# auto hammer, Moyno 3L6 pump, quick disconnect mast, ackermatic hydraulic jaws, wireline winch, aux. winch, cathead, slide base, mounted on 2000 GMC Topkick, 75,000 miles,3 hyd jacks Price: $89,000
ACKER SOILMAX AUGER RIG (Ref#6027T) Manufactured 1990, 20’ 2-part mast, 125 hp Deutz air cooled engine on deck, wiggle tail, hydraulic puller, 3 winches on deck, 1 bumper winch, mounted on 1990 International 6 WD truck with 366 diesel engine, 59,000 miles, 6 speed transmission high/low, new tires, new batteries, alternator check, hydraulic hoses replaced, both hydraulic pumps rebuilt, spare hydraulic pump, good shape, 14” solid stem auger (new) Price: $92,500
ACKER AD-II (Ref#9399N) Manufactured 1973, gas engine on deck, mounted on 1990 F800 4 wheel drive truck with gas engine, CDL required, running condition Price: $87,500
Tools available at extra cost
ACKER ADII (Ref#11340T) Mounted on Marooka 800 (needs engine), not running, no hammer Price: $50,000
FAILING F10 (Ref#11968Nc) Manufactured 1990, set up for core/auger/water and air rotary drilling, mounted on 1990 International 4900 6x4 with DT466 diesel engine, Gardner Denver 5x6 mud pump, Moyno 3L8 pump, 2 winches, new Cummins deck engine (less than 300 hours), deck mounted hydraulic drive 2000psi steam cleaner/power washer, toolboxes, auger rack PRICE: $122,500
FAILING F10 (Ref#4885Td) Manufactured 1990, diesel deck engine, mounted on Ford L9000 with diesel engine Price: $77,500
FAILING F10 (Ref#10645) Manufactured 1989, mounted on Ford LN8000 with diesel engine (35,000 miles), diesel engine on deck, 3 winches, hydraulic wrench, mud pump Price: $100,000
FAILING F9 (Ref#14445T) Manufactured 2002, Deutz deck engine, mounted on Interantional truck with diesel engine, Cummins deck engine, angle capable, in/out and side to side slide base, water tank, Moyno pump, no auto hammer, cathead, no tools or augers PRICE: $97,500
GEFCO/FAILING AUGER DRILL RIG (Ref#3160T) Manufactured 2004, (3) winches, mud pump (needs to be gone through), mounted on 2004 Ford F550 Super Duty Power Stroke diesel 6.0 engine, approx. 131,000 miles, rig and truck recently serviced with new oil and filters, new front suspension with new rods, new steering chock/dampener, sway bar and bushings, sway bar links and bushings. New power steering pump, new serpentine belt, new front and rear brakes. Includes 120’ drill rod, flight auger, SPT set up with automatic hammer, rock bit, 2’ x 4’ extension rods, sampling tubes. Price: $112,500
FAILING F6 (Ref#11968Na) Manufactured 1990, core and auger drill, mounted on 1990 International 4900 with DT466 diesel engine, 2 winches, Moyno 3L8 pump, electric over hydraulic controls, Cummins 4BT deck engine, deck mounted 2000psi steam cleaner/power washer, toolboxes, auger racks Price: $57,500
FAILING F6 (Ref#3664R) Manufactured 1990, Cummins 4BT on deck, mounted on 1995 Mack CH613 3-axle truck with Mack 350 engine, 2-3/8” kelly, custom rod table, fully tooled, 250’ of 2-7/8” Failing drill pipe, 4-1/4” augers, 6-5/8” augers, NZ rod Price: $75,000
GEFCO STRATASTAR 25 (Ref#8231R) Manufactured 1996, mounted on 1996 International 4900 with DT466, approx. 81,000 miles, 3 winches, 3L8 Moyno pump, SS water tank, fluted kelly, rod table with breakout wrench, (2) swing out auger racked PRICE: $63,500
GEFCO STRATASTAR 5 AUGER DRILL (Ref#10761T) Manufactured 1996, approx. 2570 hours, Deutz BF4L1011 diesel 72 hp deck engine, mounted on 2009 Ford F550 34 x 4 truck, 114,000 miles, diesel powerstroke truck engine, 16” on/off hole slide base, 5000# torque rotary tophead, 72” feed travel, 9’6” corwn block, 2 rear and 1 front hyd leveling jacks Price: $57,500
GEFCO SS-10 (Ref#5795T) Manufactured 1994, auger rig mounted on 1994 Ford F800 truck with Cummins 8.3L diesel engine (new engine installed with 100,000 miles), PTO, 8 speed head, 12,000# torque, 650 rpm, 12K main hoist, 2.5 aux line, wireline, Moyno 3L6, 300 gal water tank, breakout wrench, rod holder, 60’ 4” SSA, 120’ 4-1/4 HSA, 130’ HQ3 core, 150’ NWJ rod, bits, subs, pnis, bolts, fresh paint, leveling jacks Price: $105,000
Available at extra cost:
2003 CHEVY DURAMAX ¾ TON, 2016 18’ trailer Price: $19,000
PACKAGE PRICE: $120,000
ARDCAN K20 AUGER RIG (ref#6091T) Manufactured 1985, mounted on Ardco 6 x 6 carrier with Cat 3208 diesel engine, Norhill style tophead auger rig, driller’s platform, toolboxes, no drill pipe, extra set of tires, Rockwell axles, hydraulic steering and brakes Price: $62,500
IVI PROPSECTOR DRILL BUGGY – AIR ROTARY/MUD ROTARY/AUGER/REVERSE CIRCULATION AND ANGLE (Ref#6092Ta) Built 1983, heavy duty chains on mast/topdrive, engines updated in 2010 to John Deere 6081 diesels, 580/75 or 380/250 2-stage air compressor, Clark 4 speed automatic transmission, 100 gallon on board water tank, Bean injection pump, front winch, dims/weight: 27’L x 8’4”W x 9’6” H 30,000 lbs., no tooling included (green rig) Price: $115,000
IVI PROPSECTOR DRILL BUGGY – AIR ROTARY/MUD ROTARY/AUGER/REVERSE CIRCULATION AND ANGLE (Ref#6092Tb) Built 1983, engines updated in 2010 to John Deere 6081 diesels, 580/75 or 380/250 2-stage air compressor, Clark 4 speed automatic transmission, 100 gallon on board water tank, Bean injection pump, front winch, dims/weight: 27’L x 8’4”W x 9’6” H 30,000 lbs., no tooling included Price: $115,000
DYNO-DRILL SEISMIC RIG (Ref#679N) Manufactured 2005, self contained, 185/125 Ingersoll Rand air compressor (570 hours), John Deere Powertec 4.5L diesel engine on deck, air and hydraulic breakout, C50R-3B Yanmar rubber track carrier with Yanmar disel engine, crawler has 294 hours, (2) 10’ augers, 18’ of 2-3/8 drill rod, 28’ of 2-1/4” drill rod, various bits PRICE: $57,500
SEISMIC AUGER DRILL RIG (Ref#9654Tb) Mounted on 1982 Ford 700 truck, 2 wheel drive, gas engine, 302 Ford gas deck engine, currently working POR
SEISMIC AUGER DRILL (Ref#4544RA)Manufactured 1985, mounted on 1995 Freightliner FL80, Cummins 8.3 engine, PTO, new 4 stage P75 hydraulic pump, 3” Moyno pump, staff rotary head, 900 gallon water tank, no auto hammer, includes flotation tires Price: $27,500
MODIFIED SEISMIC SERVICE DRILL RIG (Ref#8179) B61 Staffa Head, 1300 Imp gallon water tank, exhaust heat, 3” Bowie loading pump, 3” Moyno pump, liquid mud injection, stem handling system with 790’ of auger, mounted on 1989 Ford L9000 with Cat 3306B diesel engine, Jake brake, Programmable Proheat: RTO14613 c/w extended countershafts and two Chelsea 510 PTO’s driving (2) 4535 Vickers vane pumps (60 & 38 US gal/min), 12 front, 44 rears, lockups, air ride, a/c Price: $140,000 CDN
SEISMIC RIG (Ref#11184T) stored inside Price: $80,000 CDN
SEISMIC DRILL RIG (Ref#3133T) Multi power seismic drill, track mounted Price: $95,000
CHARDEN AUGER DRILL (Ref#1309T) Mounted on 1981 International tandem axle truck with diesel engine, Moyno pump, water tank, no slide base, no auto hammer, no cathead, no sandline, PTO POR
COMTRAK SEISMIC AUGER DRILL (Ref#4544RB) Manufactured 2001, track mounted with 4 cyl Cummins engine, can drive from cab or rear, rebuilt Tempest 12 air compressor (less than 100 hours), 5’ mast, handles 5’ drill pipe, water drilling capabilities, 130 gallon water tank, new hydraulic pump, new tracks, many spare parts PRICE: $37,500
COMTRAK AUGER RIG (Ref#323Tb) POR
CANTERRA 450 (Ref#11327) Manufactured 1991, Detroit diesel 285 hp deck engine, 625/220 GHH air compressor, mounted on 1991 Mack tandem axle truck with diesel engine, 5 x 6 mud pump, 4 leveling jacks, auger racks, hammer racks, good condition Price: $155,000
CANTERRA 312 BUGGY RIG (Ref#5425) Manufactured 1989, rig compressor and water tank mounted on separate buggy, designed to go anywhere. Rig: mounted on 4 wheel articulating buggy, powered by 240 hp Cummins diesel engine, sliding angle mast, drills vertical to 45°, can drill to 1,000’, uses 10’ drill pipe, 3-7/8” diameter, air side inlet, reverse circulation package, 4” hammer, 1000’ of Matrix drill pipe x 10’, has been used in Alaska to the US desert. Compressor: 900/350 Sullair compressor, mounted on 4 wheel buggy, John Deere log skidder C543, powered by 8V92 Detroit diesel, articulating. Water buggy: water tank mounted on John Deere log skidder 543, powered by 6V92 Detroit diesel. Complete Package, ready to drill: $525,000
CANTERRA CT-250 DRILL RIG (Ref#5926T) Manufactured 1997, Refurbished 2009, Air/Auger/Mud Drilling), Cummins 4BT diesel deck engine (approx. 4,250 hours), 3 winches,, JIB, sandline, 2 speed power head, Moyno pump, 3 auger side racks and pipe rack, mounted on International truck powered by Cat diesel engine, 9 speed transmission, approx. 66,100 miles, 4 hydraulic leveling jacks, located Middle East Price: $62,500 USD
CANTERRA CT-250 (Ref#12782T) Mounted on AWD International 4900, single rod loader, pipe spinner, 3 hoists, cathead, 4 x 3 Mission Sandmaster, 3L6 Moyno, desander, 3.9 – 125 hp Cummins deck engine, 300 gal SS pan, 200/150 air compressor, reworked hydraulic system at a cost of $35k Summer 2020 Price: $162,500
CANTERRA CT-150 (Ref#4885Tg) Manufactured 1989, 4 cylinder Cummins diesel on deck, 932 hours, 5.5’ stroke that splits for low clearance, adapter available to make rig with 11’ stroke, 15’ mast, cathead, centrifugal mud pump, 6000# winch, 8,000# winch, 12,000# winch, breakout wrench, rod table, auger guides (4-1/4 and 6-1/4”, high speed head for coring, mounted on 1988 Ford F700 truck, trailer Price: $37,500
BIG BEAVER AUGER DRILL (Ref#4220T) Pop up on wheels, 22 hp Honda engine, pully hammer, new fuel tank, approx. 400 hours, 12 augers included, currently working Price: $29,750
BIG BEAVER DRILL RIG (6517T) Gas engine on deck, Moyno 3L6 pump, 1 winch, in/out slide base, mounted on 1994 Kaihatsu Hijet 4 x 4 single axle truck (water tank not included), ready to drill Price: $50,000
BIG BEAVER AUGER DRILL RIG (Ref#9824T) Manufactured 2021, very low hours (only used two times), auger fork, soil sampling kit, 24.9 hp Honda gas engine, 48” hollow stem auger assembly, center rod puller, 3” hex auger pin, 140# safety drive hammer, split spoon sample Price on Request
EXPLORER 2000 (Ref#13126Tb) Built 1980, low clearance rig, 12’ mast, bare rig with tophead and hydraulic centrifugal mud pump, no engine, sitting several years Price: $9,500
BUCK ROGERS 760 AUGER DRILL (Ref#9670T) Trailer mounted, diesel engine, swivel attachment, sandline, extended derrick Price: $47,500
ARDCO SUPER L MINI AUGER DRILL BUGGY (Ref#9672T) Currently set up for auger drilling, 4-cylinder Isuzu diesel engine, N P 4-speed transmission, Rockwell TRRT-32-79 transfer case, bumper mounted PTO driven Ramsey 400-L winch, 3-stage commercial hydraulic pump, 14’ lockable mast, hydraulic hoist drum, rod/auger rack. Can be converted to mud rotary drilling with addition of swivel (included) and mud pump (not included), unit runs strong and is light and fast, easily hauled and mobilized Price: $56,500
BOART LONGYEAR BK66HD AUGER DRILL (Ref#4556T) Mechanical rig, John Deere diesel engine, 3 hoists, auto hammer, mounted on Ford Truck Price: $80,000
BRAINARD KILLMAN BK-81 (Ref#4862R) similar to CME 85, set up to run mud, air or core, manufactured 1991, John Deere diesel deck engine, mounted on International tandem axle truck with Cummins engine & 13 speed trans, 24000# torque, in-out and side to side slide base, rod clamp & breakout, 3 hoists & wireline/safety driver, mast standpipe, Moyno 3L8 pump, 140# auto hammer, 500 gallon aluminum water tank, above & below deck rod storage, 2 toolboxes, 2 underbody swing out auger racks, 4 leveling jacks, new fuel pump and compressor in truck, new rear tires, painted ready to go PRICE: $62,500
Tooling available at additional cost
BRAINARD KILLMAN DRILL (Ref#8538T) 6 cylinder John Deere diesel deck engine, 10’ stroke, mounted on 2004 Ford Sterling with 400 hp Cat engine, low mileage, 2 rear hydraulic leveling jacks, front jack removed but available, no pipe or tools Price: $67,500
GIDDINGS AUGER/PROBE RIG (Re#4705T) Wisconsin gas engine, unmounted POR
GIDDINGS 2400 LIMITED ACCESS RIG (Ref#12740Ta) Mounted on 1990’s Suszuki jeep, all aluminum, Kohler Command 25 engine, rotary head, fully operational Price: $25,000
LIMITED ACCESS AUGER DRILL RIG (Ref#4099T) 100’ drill depth, 4” – 6” borehole diameter, 2” – 18” auger diameter (3-5’ lengths), 28 hp gas EFI air cooled 4 cylinder OHV engine, up to 2500 lbs pull/push back force, 4040 lb-in torque intermittent, 570 lb-in continuous pull/push, 100 rpm speed, 1.63” hex rotary, in/out, track mounted, SPT cathead, SPT hammer, rods, 2 split spoon samplers, boom winch. Trailer included, some accessories included, located Canada Price: $58,500 CAD
CONCORD 9201 AUGER DRILL RIG (Ref#13972T) Trailer mounted, misc auger bits and air top head swivel PRICE: $18,500
CYCLONE 36A (Ref#2436T) Manufactured 1973, 6 cyl diesel deck engine, 3 line machine, mounted on 1980’s International cab and chassis, DT466 truck engine, wrenches, no augers Price $22,500
CYCLONE 36A (Ref#2726Ta) with auger attachment, 4 cylinder Continental gas deck engine, mounted on good running military mutifuel 6 x 6 truck, 2 rear hyd jacks, running condition, includes wagon with 5” solid stem augers, Price: $39,500
CYCLONE 36 CABLE TOOL/AUGER COMBINATION RIG (Ref#1576N) diesel deck engine,mounted on 6 x 6 Army truck with Mack diesel engine, 2 catheads, sandline, 3 hyd leveling jacks, tools and augers included Price: $50,000
CYCLONE 35 CABLE TOOL RIG WITH AUGER ATTACHMENT (Ref#383Ta) 3 line machine, Ford 4 cyl gas deck engine, needs new truck, sitting long time, 4” tools Price: $11,500 - Michigan
SPEEDSTAR 55 (Ref#14145R) with swing away auger unit on rig, 2 line machine (3rd can be added), 4 cyl Continental gas deck engine, mounted on 1973 Chevy C35 with 350 gas engine, low mileage, 1 front & 2 rear hydraulic leveling jacks, tooled up for 4” holes, sitting 2 years, includes 3” bit, sand sucker, bailer and 100’ of 4” augers Price: $13,500 – Michigan
AUGER RIG (CUSTOM MADE) (Ref#10762R) Mounted on Japanese Morooka 600E with diesel engine, 3000 hours, hydraulic hoses and valves replaced with American parts, has drilled to 50’, 50’ of 6-1/4” augers included Price: $75,000
GEOTECHNICAL CUSTOM BUILT AUGER RIG (Ref#325T) Built 2018, auger drill head, core head, auto hammer, 2 winches, 3.25” or 4.25” auger, N or H core rod, two available Price: $87,500 USD
Bobcat T550 with wireless remote package available at extra cost
SHOP BUILT AUGER/MUD ROTARY DRILL RIG (Ref#619Tc) Manufactured 2015, Kubota engine with 210 hours, track drill, no hammer, can auger or mud rotary with external pump or there is a place for pump to be installed, like new Price: $52,500
SHOP BUILT AUGER RIG (Ref#3313N) track mounted, 50 hp diesel engine, low clearance 8’, 3500 ft/lb torque, 70 lb auto hammer, 2 speed head, telescoping cylinders, in/out slide base, gimbel coupling Price: $80,000
SHOP BUILT SOIL SAMPLING RIG (Ref#9971N) PTO driven, hydraulic winch, cathead, high volume hydraulic pump, unmounted, CME tooling includes 25’ of 7-1/2 continuous flight augers, 12” core bit Price: $29,500
SHOP BUILT AUGER RIG (Ref#2053Tb) 5 cylinder Staff motor, Sundstrand pump and motor, right angle drive gearhead (rig disassembled) Price: $19,000
SHOP BUILT AUGER RIG (SIMILAR TO CME) (Ref#8944Ta) Mounted on 1989 Ford F700 2WD truck with gas engine, no angle capability, grouter, 300 gallon water tank, 2 rear hydraulic jacks, 3rd jack just for the bed, running condition Price: $24,500
GUS PECH GP1300 BRAT SERIES AUGER DRILL RIG (Ref#5760T) Manufactured 2003, one owner rig, 13,000 ft/lb torque, 18.400 lbs pulldown, 24,500 lbs pullback, mounted on 2003 Sterling 6 x 4 truck with Cat engine, PTO, rig has 18,200 hours, 5300 hours on new engine (engine replaced at 12,900 hrs) Price: $105,000 USD
GUS PECH BRAT GP1000 BRAT (Ref#1064N) Manufactured 1980, mounted on Transequip ATV2 axle all wheel drive, all terrain tires, Cummins diesel engine with PTO, 3L6 Moyno pump, 28’ mast, uses 20’ drill rod or auger, front and rear leveling jacks, high torque, drilling capacities: with 4-1/2” auger can drill to 250’, with 3-1/2” drill pipe can drill to 700’ PRICE: $120,000
GUS PECH AUGER DRILL (Ref#11890Tc) Manufactured 1991, 750/200 air compressor, 10,000# ft/lb torque, mounted on 1996 Mack truck with Mack diesel, diesel on deck Price: $77,500
DAVEY DK-5 (Ref#6859N) Manufactured 2001, 4171 hours, air rotary/auger rig, 24’ stroke, 5 x 6 duplex mud pump, Moyno 3L6 pump, 24’ stroke, safety driver, mounted on tandem axle truck with diesel engine, PTO, 18,000 miles Price: $130,000
SEISMIC RIGS (Ref#11177R) 2 available (1 for parts), track mounted, set up for air, water and auger, water tank built into rig, set up for low impact seismic Price on request
AUGER BARGE (Ref#945N)
Barge size: 25’ x 12’ x 2’6”
Stabilizing legs 4 hyd adjust 25’ 5” x 5”
Derrick: 25’ x 18” x 18” – 12’ horizontal travel, 20’ vertical lift
Drill auger engine (29.8 hrs), Cummins 2006, Model 4B 3.9 4-cylinder, gross hp/kw 110/82 @ 2200 rpm, fuel/disel 10 gal plastic tank
Hydraulic tank Force America 10” x 3’ x 5’
Winch: Tulsa hydraulic, cable 1/4 x 50’
Drill pipe spinner hydraulic
Drill pipe (1) 4” x 14’
Drill bit (1) 12” x 8’ auger type
Drill with water flush
Pump: Honda with 20’ x 2” hose
Suction hose 2” x 12’
Pump hose Alfagomma T202 10 bar, 150 psi
General purpost
Hydraulic piling puller 4’ x 4” x 4”
Price: $115,000
ALTEC DIGGER DERRICK (Ref#11511T) Built 2007, mounted on 2007 International truck with DT466 engine, PTO, used for setting light poles Price: $66,500
ALTEC DIGGER DERRICK (Ref#5463Ta) John Deere diesel engine, mounted on 2003 International truck with diesel engine, 2 rear hydraulic leveling jacks, tools and bits Price: $100,000
ALTEC DIGGER DERRICK (Ref#9715T) Manufactured 2002, 16’ depth capacity, mounted on 2002 International truck with diesel engine POR
DIGGER DERRICK (Ref#5885T) Mounted on 2009 International with Max Force engine Price on Request
(Ref#15489R) Diedrich 6 1/4 ID hollow stem augers (95% new – ½ never used and ½ only used twice), 50’ with center plug, barely used, like new condition Price on Request
(Ref#5790R) Mobile 3-key hollow stem augers
55’ of 6 1/4” ID x 5’ H S A , 50%
100’ of 3 1/4” ID x 5’ H S A, 50%
Price on request
RAMAC GROUND PENETRATING RADAR (Ref#8433T) Ramac monitor, 12 volt, cart included Price: $11,500