Last Updated: 11/12/2024 9:20 AM
MUD PUMPS FOR SALE
MUD SYSTEMS
*PUMPS
OPI 700 HDL TRIPLEX PUMP (Ref#7719T) 700 hp at 150 rpm, fully rebuilt, Cat 3408 engines (approx. 15000 hours and run very well) Two available Price: $275,000 CDN each
OPI 500AWS PUMP (Ref#4440T) Manufactured 1982 with 2004 Detroit diesel engine, located Canada Price on Request
NATIONAL 12P-160 TRIPLEX MUD PUMP (Ref#5586T) 3 available in India. 1600 HP, rated pump speed 140 strokes per minute, maximum fluid cylinder liner bore 6¾”, stroke 10", 10,000 PSI hydrostatic pressure of standard cylinder. 2.853 ratio of gears. 10" suction connection, 6" discharge connection. Valve pot mod .7., steel fluid ends, 5,000 psi pulsation dampener. Oilfield skid mounted. Performance Data: at 120 strokes per minute with 6¾” liners, pump will produce 4305 PSI and 574gpm. Set up for electric power. Dimensions and weight: 84,700lbs, 209"L x 113"W x 75"H. Built 1976. Located India, removed from offshore drilling rig.
Price: $75,000 each
Available at additional cost: $30,000 for new spares (valued at $80,000 new cost)
Electric motors available at additional cost.
NATIONAL 12P-160 TRIPLEX PUMPS (Ref#2355R) 3 available, driven by GE752 traction motor, 1600 hp, 12” stroke, 5000 psi, surge chamber, skid mounted, located Middle East Price: $310,000
NATIONAL 12P-160 TRIPLEX PUMPS (Ref#8938R) 3 available, overhauled by National Oilwell (ready in 2-3 weeks after purchase), 1600 hp @ 120 stroke per minute, 12” stroke, 5000 psi, skid mounted, GE Amerimex 752 traction motors, new liners, seats, valves and pistons Price: $295,000 each
Price with 7500 psi fluid ends installed: $350,000 each
NATIONAL 12P-160 MUD PUMP (Ref#2062Re) Refurbished, complete with South West fluid ends and DC traction motors, located Middle East, 3 available Price: $720,000 each
NATIONAL 12P160 MUD PUMPS (Ref#656Ta) never used, bare pump with top mount for electric motor Price: $210,000 each
NATIONAL OILWELL 10-P-130 (Ref#5298T) new plungers, pulsation dampener, belt driven, no engine, mounted on oilfield skid, sold as is Price: $65,000
NATIONAL 10P-130 MUD PUMP (Ref#13794T) 2 available, pulsation dampener, skid mounted Price: $55,000 each
NATIONAL 10P-130 MUD PUMP (Ref#7746Ta) Cat C32 engine, Pacific rim gear reduction clutch Price: $210,000
NATIONAL 10P-130 MUD PUMP (Ref#7746Tb) Cat 3508 engine, pacific rim gear reduction clutch Price: $210,000
NATIONAL 10P130 MUD PUMP (Ref#320Ta) 1300 hp, diesel/DC electric motor, 4 available Price: $67,500 CDN each
NATIONAL 8P80 TRIPLEX MUD PUMP (Ref#9073R) 800 hp, 6-1/2” x 8-1/2”, FS, FS FE w/QC caps and cylinder head caps, Oteco 3” shear relief valve, suction screen, 5 x 6” centrifugal charging pump, powered by Cat 3412 diesel engine, rod cooling pump, Oteco type D pressure gauge, mud valves, bull wheel, master skidded, complete, good condition Price: $275,000
NATIONAL 8-P-80 (Ref#6118Ri) with Cat D379 diesel engine, skidded in building, Hydrill pulsation dampener Price on Request
NATIONAL OILWELL 850 HP MUD PUMP (Ref#15442T) Mattco API-9 fluid end rebuilt, very little use after rebuild, pulsation dampener, no engine, skid mounted Price: $22,000
ELLIS WILLIAM 440 TRIPLEX MUD PUMP (Ref#11003T) 7000 psi fluid end, 500 hp Detroit 60 Series engine, Allison transmission Price: $83,500
NATIONAL 7-P-50 (Ref#6302R) 750 hp, 8” stroke, 6” suction inlet, 4” discharge outlet, piston size 4-1/2” – 7”, max rod load 85,000#, approx. weight 11,500#, lubrication force fed, steel pump power end, double helical gears, 4.95:1 gear ratio, rod bearings sheel type replaceable, main bearings straight roler, pinion bearings spherical roller, crankshaft 1pc forged alloy steel, connecting rod knuckle joint, crosshead guide bronze replaceable, piston type fluid end Monoblock design, from high strength alloy steel, treated and sonic tested, Cat D379 diesel engine, 500 HP max linear bore size 3-1/2 – 6-1/4 x 7-3/4” stroke, test pressure 10,000 psi, gear ratio 2.742.8” suction line to 4 discharge stroke, location South America Price: $110,000
CONTINENTAL EMSCO FB1600 TRIPLEX MUD PUMP (Ref#1362Tb) Price: $235,000
AKMH WIRTH MODEL TPK 7-1/2 x 14 MUD PUMP (Ref#1362Tc) 2200 CL, gear driven, 2200 hp, 7500 psi, (2) GE AC motors Price: $245,000
OILWELL A1700PT TRIPLEX MUD PUMP (Ref#1362Td) 1600 hp, (2) EMD D-79-MB 800hp DC motors, rated 5000 psi Price: $215,000
CONTINENTAL EMSCO FB1600 TRIPLEX MUD PUMP (Ref#1362Te) Price: $235,000
NATIONAL OILWELL VARCO 12P-160 ATRIPLEX MUD PUMP (Ref#1362Tf) Price: $245,000
WIRTH TPK MUD PUMP (Ref#1362Tg) 2200 hp Price: $245,000
IDECO (White Star) T1600 MUD PUMP (Ref#1362Th) (2) GE752 motors, pump cap 1600 gpm Price: $225,000
EMSCO FC2200 MUD PUMP (Ref#9568Tb) 2200 hp, 4 available Price: $100,000 each
NATIONAL 12P-160 MUD PUMP (Ref#1362Tj) 1600 hp Price: $220,000
NATIONAL JWS340 PUMP (Ref#10665Ta) 2015 model, bolt on gear reducer couple to Allison 5 speed auto transmission, driven by Detroit 60 Series engine (low hours), 2500 charge pump, discharge manifold.
Price, very good used condition: $185,000
Price with 6 month warranty: $220,000
NATIONAL JWS MUD PUMP (Ref#1205Tc) with Detroit 6V71 engine POR
NATIONAL JWS300 MUD PUMP (Ref#2767R) Series 60 Detroit diesel, 14 liter engine w/Allison transmission, mounted on oilfield skid, major overhaul, completely unitized with fuel tank, fluid end rebuilt by Matco Price: $195,000
NATIONAL OILWELL VARCO 308T-7 (Ref#3358T) 4” Ceramic plungers, external drip lubricated, pulsation dampeners, John Deere 400hp engine, bypass oil filter, electric start, 200 gal fuel tank, well maintained, Hansen gear 7.25:1, Cobra with cooler Price: $225,000
(2) NATIONAL C350 MUD PUMPS (Ref#3077N) Standby – not pump in 15 years. Pumped chalk continuously at 600 psi in a cement factory. Complete with electrics and electric motor, complete, bull wheels and guards, complete, fluid end, pistons, liners, and valves. Low hours. Located Europe. Price for both: $105,000 loaded in a 40’ container
NATIONAL G700 14” STROKE DUPLEX MUD PUMP (Ref#8312Ta) 700 HP, 14” stroke, cast iron fluid end, surge chamber, 285 gpm @ 3550 psi with 5” pistons or 805 gpm @ 1265 psi with 8” pistons, mounted on skid 10’ x 23’ with enclosure, sold as is Price: $27,500
NATIONAL K500 DUPLEX MUD PUMP (Ref#2757Tc) 6 cyl Cat engine Price: $31,500
IDEAL 250 MUD PUMP (Ref#10287Ta) 6-1/2 x 15” Twin Detroit 6V71, mounted on low boy trailer fulled with 1983 Ford 8000 truck Price: $79,500
NATIONAL C250 DUPLEX MUD PUMP (Ref#7103) 1000# at 56 gpm, powered by twin 671 Detroit diesel on oilfield skid, complete Price: $24,500
NATIONAL C250 MUD PUMP (Ref#9495Tb) no engine, master skidded, little slack in gears Price: $14,500
NATIONAL C-150B DUPLEX MUD PUMP (Ref#7590R) 7-1/4 x 12, skid mounted, powered by 8V71 Detroit engine PRICE: $14,000
IDEAL 6 x 12 MUD PUMP (Ref#2637T) 671 Detroit engine, mounted on like new drop deck trailer, Matco fluid end, new liners, running Price: $52,500
IDEAL C-150 6 X 12” MUD PUMP (Ref#853Nd) skid mounted, twin 671 Detroit diesel engines POR
IDEAL C-150 DUPLEX MUD PUMP 7-1/4 X 12 (Ref#8153Na) with Detroit 6V71 diesel engine mounted on oilfield skid. Price: $55,000
IDEAL C-150-B MUD PUMP (Ref#8644Td) Price: $22,000
NATIONAL 5-1/2 X 10” MUD PUMP (Ref#14556Ta) skid mounted with fuel tank, 471 Detroit diesel engine, 4 speed transmission, all new injectors, sitting idle since 2021 Price: $16,500
NATIONAL C-100 DUPLEX MUD PUMP SYSTEM (Ref#10047R) National C100 duplex mud pump (currently has 5-1/2” liners), gear end and mud end is in good shape, powered by 671 Detroit engine, 1000 gallon fuel tank capacity, tndem trailer mounted (air brakes), fully winterized enclosure with heater unit, locking doors and parts shelves, stairways and rails, 8” steel suction line/hose/sand screen pot/pole winch for adjustment of suction depth, Price: $50,000
IDEAL 5 X 10 DUPLEX MUD PUMP (Ref#9068T) 453 Detroit engine (tall, not short), mounted on 5th wheel trailer, new bearings in crane case, working pump Price: $29,500
6-1/2 X 12 IDEAL MUD PUMP (Ref#580Nc) mounted on skid trailer with gooseneck, 6V71 Detroit diesel engine - PRICE: $42,500
3 DUPLEX MUD PUMPS (NO MOTORS) (Ref#4404N)
1. National G1000, Screw fluid end caps & gear end good, Metal house, Pulsation dampener Price: $28,000
2. National C-350, Screw fluid end caps & gear end good, Metal house, Pulsation dampener Price: $25,000
3. Oilwell 220P, Screw fluid end caps & gear end good, Metal house, Pulsation dampener Price: $25,000
Location: Wyoming.
3 DUPLEX MUD PUMPS (Ref#912N)
Ideco 1250: $70,000
National N1100: $70,000
National N900: $70,000
All with pulsation dampeners and on skid
No power
Have been stacked for years
HONGHUA HHF500 MUD PUMP (Ref#9119T) 500 HP horizontal, single acting triplex piston pump, 6-3/4” max cylinder liner diameter, 7-1/2” stroke, 165 spm, 4.286:1 gear ratio, 65 gal crankcase capacity, 300 ft/lb tightening torque, 30” wrench length, 120 lbs force on wrench, gear oil pump with 5 hp motor, centrifugal pump with 5 hp motor, Reastar transmission, 2012 Cummins KTA19P engine 750 hp wit approx. 4600 hours, inluces $75,000 in spare parts, located South Asia Price: $92,500
NF-500 (CHINESE MANUFACTURED0 500 hp MUD PUMP (Ref#13723R) Manufactured 2011, 550 gpm@3000 psi, Cat C15 diesel engine, pulsation dampener, mounted on Galvanized jack-up base, located Australia Price: $280,000
SKYTOP BREWSTER 7-1/4 X 14” MUD PUMP (Ref#13399Rb) 379 Cat didsel engine, Matco hi pressure forged steel fluid end, quick change valve heads, Hydril dampener, brand new expendables sill in box Price: $59,500
14” x 6” BREWSTER 550 MUD PUMP (Ref#9495Ta) no engine, gear end good shape, master skidded w/motor skid Price: $14,500
7 X 14 MUD PUMP (Ref#7578T) 471 Detroit engine, trailer mounted Price: $40,000
IDECO 550 7-1/4 X 15 MUD PUMP (Ref#1198T) Skid mounted, Cat 353 engine, air clutches, Matco fluid end, 120 gal aluminum fuel tank Price: $47,500
OILWELL 14PDH (ref#3813R) 7-1/4 x 14, Matco fluid end with screw type valve, covers and cylinder heads, Detroit 8V71 diesel engine, surge chamber, pip-off valve, 10 groove pully, 5-1/2” liners, mounted on oilfield skid, 1 year warranty on motor, Price: $90,000
OILWELL P214 14” DUPLEX MUD PUMP (Ref#6017Tb) skid mounted, Cat 3406, Matco fluid end, air clutches PRICE: $29,500
OILWELL 4 X 6 MUD PUMP (Ref#8578T) New belts, diesel power, new mud end parts, mounted on skid on 8’ x 16’ gooseneck trailer, ready to work Price: $28,000
OILWELL 4 X 6 DUPLEX MUD PUMPS (Ref#11652RC) no engine, skid mounted, (2) available Price: $8,750 each
EWS 440 UNITIZED MUD PUMP PACKAGE (Ref#599N) refurbished Detroit Series 60 engine, refurbished Allison transmission, input horsepower rating 440 max, 320 max pump speed rating, 6” stroke length, 4-1/2” maximum piston size, 3000 psi fluid end working pressure rating, 3” (as required) discharge connection size, 6” (as required) suction connection size, 2” NPT accessory connection size, API#4 valve size, API#S-2 piston rod end, 35 gallon cancase oil capacity, 24 gallons liner wash capacity, internal gear ratio: 4.58:1, 6.517:1. Price: $200,000
DRAGON W-440 TRIPLEX 6” MUD PUMP (Ref#7756Ta) skid mounted on 8’ x 28’ skid, Detroit 60 Series 8 cyl Turbo diesel power plant with 440 hp, on board fuel tank, M310 Series control panel Price: $132,500
L & L SMC T135-5 TRIPLEX 6” MUD PUMP (Ref#7756Tc) mounted on 7’ x 21’ skid, Cat 6 cyl turbo diesel engine, in-line style system, hyd tanks Price: $29,500
MCFARLAND P38 PUMP (Ref#3917Ta) low hours, 1”, 10,000 psi set up, pump can be configured for 18,000 or 25,000 psi, 60 hp electric motor, skidded Price: $27,500
FAMMCO TRIPLEX PUMP (Ref#2760T) 2 x SPM 600 HP 10K, 3-1/2 x 6’ stroke plunger, powered by (2) Cat C12 400 hp diesel engines, (2) Allison HT750 trans., (2) 4 x 5 cent pumps, (2) 5 x 6 slurry mixing pumps, 6 bbl mixing tub, 14 bbl averaging tub, mounted on 2002 tandem axle 8’6”W x 50’ step deck trailer Price on Request
GARDNER DENVER PZ-11 (Ref#10748R) approx. 7000 hours, Cat 3512C (1476 hp), 5000 psi fluid end cylinder, 5-1/2” piston cylinder, antifreeze heaters, WPT W21-CG-300 Type 1 PTO clutch, 16 groove drive sheave, 16 groove bullwheel, 16 groove Kevlar belt with necessary guards, 5 x 6 x 11 charge pump c/w 50 hp@1200 rpm electric motor. Discharge plumbing: 2” 5M XXH B/W Oteco gate valve, 4” 5M XXH b/w Oteco gate valve, 3” 5M Oteco popoff valve w/1502 connection, 2” 5M type D Oteco mud gauge with 1502 connection, Hydril 20 gal 5M pulsation damper. Mounted on oilfield skid with separate, with expendables cabinet, knowledge box and removable engine skid for breaking the engine and pump into separate smaller loads. Winterization package, oilfield lighting, explosion proof starters for charge pump, rod oiler pump and liner wash pumps. Price: $695,000 - Make Offer
GARDNER DENVER PZ11 (Ref#13329T) 2 available, rated for 7500 psi , new Cat 3512C (2250 hp) motor with new Cat CX48 transmission POR
GARDNER DENVER PZ-11 MUD PUMP (Ref#2062Ra) DC traction motors, refurbished to CAT-IV, located Middle East Price: $700,000
GARDNER DENVER PZ9 TRIPLEX MUD PUMPS (Ref#10825Tb) Two available, Cat 3412 engines (750 hp), spare parts Price: $87,500 each
GARDNER DENVER PZ9 TRIPLEX MUD PUMPS (Ref#7062T) Two Available, each complete with Cat 3508 diesel engines, pulsation dampener, and mud tanks with desander, desilter, etc. Price for Package: $110,000
GARDNER DENVER PZ9 (Ref#5297T) Cat D399 engine, pulsation dampener, skid mounted Price: $120,000
GARDNER DENVER PZ-9 (Ref#2062Rb) DC Traction motor, refurbished to CAT-IV, located Middle East Price: $450,000
GARDNER DENVER PZ8 MUD PUMP (Ref#1958Tb) Skid mounted, Cat 3508 engine, pulsation dampener, needs new pistons and liners Price: $160,000
GARNDER DENVER PZ8 (Ref#2062Rc) Cat D379 engine, new fluid end assembly, located Middle East Price: $420,000
GARDNER DENVER PZ8 (Ref#862T) Rebuilt, complete, 8” stroke, 750 hp, alloy steel modular flud cylinders, 6-1/2” liners, liner wash system, API 7 valve pots, gear reducer, steel billet fluid end, pulsation dampener, suction connection, FF discharge connection, 4.5 gear ratio, skid mounted, 130”L x 88”W x 54”H POR
GARDNER DENVER PZ7 (Ref#8588N) US manufactured, freshly rebuilt, new Detroit Series 60 engine, Allison transmission, pulsation dampener, complete and ready to go. Price: $375,000
GARDNER DENVER PZ7 STYLE TRIPLEX MUD PUMP (Ref#1245Nb) Reconditioned, inspected and tested. 550 hp input, Cat D379PCTA diesel engine (reconditioned), air start, muffler, standard instrument gauge panel, mounted on Cat rails, new 20CB500 air clutch, reconditioned radiator. Belt drive assembly consisting of pump drive sheave, pump drive belts with belt guard, engine drive sheave, engine drive belts with belt guard, pillow block bearings. Reconditioned Continental Emsco PD-45 12 gallon 5000 psi WP pulsation dampener. New O’Drill/MCM ORV 21050 2” 1,000 – 5,000 psi WP shear relief valve. New O’Drill/MCM 2” 0 – 6,000 psi WP type D mud pressure gauge. PZ7 fluid modules complete with suction manifold and discharge strainer cross. New CA-122 liner wash pump, pinion driven with spary nozzle system, water tank and hoses. New fluid end expendables with 6” liners. (3) runner oilfield type master skid with loading hitches. New 5 x 6” R.H. centrifugal 178 series charge pump, 1-7/8 shaft, 10” impeller size, belt driven off pinion shaft, drive belts with belt guard. New 6” fgure 400 hammer union. New 4” 5000 psi WP gate valve, new 200 gallon air receiver tank, new air controls. Price: $455,000
GARDNER DENVER PZ7 MUD PUMP (Ref#45Tb) Powered by electric motor, power end looks, good, may need valves, seats, liners and pistons. Price: $79,500 as is
GARDNER DENVER PZ7 MUD PUMP (Ref#45Tc) Powered by 379 Cat diesel engine with chain reduction box, engine may need work, pump may also need valves, seats, liners and pistons. Price: $72,500 as is
GARDNER DENVER TGH/PAH TRIPLEX PUMP (Ref#45Ta) powered by a Caterpillar C-13 diesel engine through an Allison Automatic transmission. This is equipped with 4" plungers. Price: $139,500 as is.
GARDNER DENVER PAH MUD PUMP (Ref#3887T) 4 identical units available, Skid mtd and power by Detroit Series 60 with Allison 750 transmission, equipped with hydraulic charge pump Price: $97,500 each
NEW PAH GARDNER DENVER PUMP TRIPLEX MUD PUMP (REF#3804Ra)
Fitted with 5" Liner and pistons, bare pump, no extras, THIS PUMP REQUIRES PRESSURE LUBRICATION OF THE POWER END (AUXILIARY OIL PUMP REQUIRED) THIS IS NOT INCLUDED.
PRICE $175,000.00 each – Delivery 18 weeks
Approximate weight 9,300#
Approximate dimensions 106” long x 67” Wide x 511/2” High
NEW PAH GARDNER DENVER TRIPLEX MUD PUMP (Ref#3804Rb)
Fitted with 5” liners and pistons with washing and lubricating system, THIS PUMP REQUIRES PRESSURE LUBRICATION OF THE POWER END (AUXILIARY OIL PUMP REQUIRED) THIS IS NOT INCLUDED, skid mounted with a rebuilt Detroit Diesel V1271 w/ Twin Turbo, 550 HP, with a chain case and a manual transmission
PRICE: $210,000.00 each
Delivery 18 weeks
NEW PAH GARDNER DENVER TRIPLEX MUD PUMP (Ref#3804Rc)
Fitted with liner & pistons, with rod washing & lubrication system, bare pump no extra's, THIS PUMP REQUIRES PRESSURE LUBRICATION OF THE POWER END (AUXILIARY OIL PUMP REQUIRED) THIS IS NOT INCLUDED, skid mounted with New CAT C13 (440 HP) diesel power unit, w/hand clutch, belt drive, belt guard, fuel tank.
PRICE $280,000.00 each
FOB Factory Delivery 18 Weeks (longer for multiple units)
Approximate Dimensions 81/2’ Wide x 16’ Long x 60” High
Weight approximately 19,000#
NEW PAH GARDNER DENVER PUMP TRIPLEX MUD PUMP (Ref#3804Rd)
Fitted with 5" Liner and pistons, w/washing & lubricating system, THIS PUMP REQUIRES PRESSURE LUBRICATION OF THE POWER END (AUXILIARY OIL PUMP REQUIRED) THIS IS NOT INCLUDED, skid mounted with New CAT C15 (540 HP) diesel power unit, with manual transmission with 4 to 1 gear case, fuel tank.
PRICE $335,000.00
Delivery 18 Weeks
GARDNER DENVER THE 5 X 6 TRIPLEX PUMP (Ref#4416Tb) Mounted on International truck Price: $52,000
OPTIONAL EQUIPMENT FOR PAH GARDNER DENVER TRIPLEX MUD PUMP (Ref#3804Re)
Rod lubricating system (fluid end) (includes: hose, fitting, pump & tank)
PRICE: $4,560 each
Pressure gauge PRICE: 1,200.00 each
Pressure relief valve PRICE: $1,020.00 each
Surge Chamber PRICE: $24,000
Charging pump (includes: centrifugal pump, hose from pump to pump, either hydraulic drive or belt drive) PRICE: $5,040 each
Gear box PRICE: $14,820 each
Chain case PRICE: $14,400 each
Auxiliary Oil Pump (gear end) (includes: hose, fittings, oil cooler pump, belt drive) PRICE: $6,000.00 each
GARDNER DENVER PAH MUD PUMP (Ref#11003Tb) Detroit 12V71 engine (rebuilt), Allison transmission, rebuilt engine Price: $87,000
GARDNER DENVER PAH MUD PUMP (Ref#7546T) 8V92 Detroit diesel engine, Allison transmission, choke manifold on unit and charge pump, pistons and liners, Price on Request
GARDNER DENVER PAH 275 TRIPLEX MUD PUMP (Ref#8169Rb) powered by NTC0855 Cummins engine Price on Request
MUD KING PAH MUD PUMP (Ref#12669T) Detroit Series 60 engine, Allison 750 transmission, 3” centrifugal pump, 90 bbl 2-compartment circulating tank Price: $290,000
Available at extra cost: 8700’ 2-3/8 PH6 P10, 23 BOPD
GARDNER DENVER PA8 (Ref#8509T) Series 60 Detroit diesel, 4” plungers, mounted on oilfield skid, needs new expendables and battery, sitting 4-5 years Price: $55,000
Gardner Denver PA8 mud pump (Ref#4384Tc) with Detroit 8V engine (rebuilt) Price on Request
Gardner Denver PA 8 mud pump (Ref#4384Td) with Detroit 60 Series Price on Request
KERR 2200 AND 3500 OR FMC M1214 TRIPLEX MIST PUMPS (Ref#7999T) Cat engines, 4 speed transmissions, rigged up with secondary containment, onboard lighting, winterization canvas for cold weather operations, Also available with Cummins or John Deere engines Priced from $77,500 to $97,500
GARDNER DENVER PQ172 TRIPLEX MIST PUMP (Ref#7827Ta) Deutz F3L914 45hp 3 cyl air cooled diesel engine with electric start, manual transmission, gauges, 4’H x 4’W x 7.5’ long, 3” hardline, 22 bbl mixing tank, skid mounted Price: $17,500
GARDNER DENVER GXP TRIPLEX 6 X 16 MUD PUMP (Ref#11010T) Skid mounted, twin Detroit 671 diesel engines, 30 ton, dimensions: 28’L x 11’W x 8’H Price: $32,500
GARDNER DENVER GXR 800 HP DUPLEX MUD PUMP (Ref#12423Rb) Matco steel fluid end, pulsation dampener, fuel tank, gauges, controls, starter, mounted on oilfield skid, completely rebuilt engine and fluid end Price: $125,000
7-1/4” X 16” MUD PUMP (Ref#8229TA) Mounted on 2010 Western Star lowboy with with (2) Detroit 6V71 engines
Available as package with the following:
1996 Volvo with flat bed trailer (Ref#8229TB), 40’ x 10’ mud pit, shaker & desanders
Package Price: $160,000
GARDNER DENVER 7-1/4 X 14” FK FXK DUPLEX MUD PUMP WITH PALFIGNER PK17502 CRANE (Ref#2246T) Mounted on 1983 Fontaine triaxle trailer with Gardner Denver 7-1/4 x 14” FK FXK duplex pump powered by Detroit 871 318 hp diesel engine, chrome lines cylinders, 900 gph, 900 psi, Matco quick change head. Palfinger PK17502 crane with hydraulic outriggers powered by Isuzu diesel engine, 17,000 lb capacity, wireless remote for crane, very good condition Price: $112,500
GARDNER DENVER 7-1/4 X 14 MUD PUMP (Ref#6012T) (2) Detroit 6V71 engines, skid mounted on a low boy trailer Price: $52,500
GARDNER DENVER FXN 7-1/4 X 14 MUD PUMP (Ref#1403T) Cat 3408 engine air start with pump drive and belt guard, PD55 Hydril dampener, 750 gallon fuel tank, mounted on heavy duty drop deck tandem trailer, low hours Price: $67,500
GARDNER DENVER FXN 7-1/2” X 14” DUPLEX MUD PUMP (Ref#8312Tb) 500 hp, on skid with Cat D343 engine, capable of 200 gpm @ 3000 psi with 4” pistons or 775 gpm @ 940 psi with 7-1/2” pistons, sold as is Price: $27,500
GARDNER DENVER FXN 7” X 14” DUPLEX MUD PUMP (Ref#6637Ta) Forged steel fluid end, quick change caps, Cat 3412 diesel engine, Hydril K20 3000 pulsation dampener, Demco 2” relief valve, belt drive, type F3000# pressure gauge, rod oiler pump, speed sensor, electric start, air clutch, skidded with roof, 3-1/2” x 20’L vibrating hose Price: $76,000
GARDNER DENVER FXZ 7-1/2 X 12 MUD PUMP (Ref#1860T) Detroit 60 Series engine, high torque convertor, 6-1/2” liners but owner will install 7-1/2” liners Price: $47,500
GARDNER DENVER FZ-FXZ MUD PUMP (Ref#4087Tb) 7-1/2 x 12, Tier 1 Detroit diesel 60 Series, 12.7L 500 hp, good gear and fluid ends, same-trailer mounted, 500 gal fuel capacity Price: $90,000
GARDNER DENVER FXZ MUD PUMP (Ref#1850T) Detroit 8V71 engine, air clutch, skid mounted Price: $37,500
GARDNER DENVER 7-1/2 X 12 MUD PUMP (Ref#5651T) Detroit engine, skid mounted, stored inside POR
GARDNER DENVER FXZ 7” X 14” DUPLEX MUD PUMP (Ref#6637Tb) Twin 671 engines, 1800 psi Price: $55,000
GARDNER DENVER 7-1/4” X 12” GARDNER DENVER MUD PUMP (Ref#5896Rf) 4 runner base POR
GARDNER DENVER FXZ 6-1/2” X 12” MUD PUMP (Ref#10287Tb) Detroit 8V71 engine, hauled on 3 axle skid trailer with 1989 TTRAC International truck Price: $69,500
GARDNER DENVER FXN DUPLEX MUD PUMPS (Ref#8214R) Two available, 14” stroke, 2” rod size, 400 hp, 75 strokes per minute, cast fluid ends, unitized on oilfield skid with Cat 3406 diesel engines, air start, new filters, oil and coolant, air receiver on deck, fluorescent lighting, drive belts with air clutch. Gone over and in good operating condition, ready to be put into service. Pumps currently have new 6” liners with production being 480 gpm @ 1000 psi. All fluid end parts are brand new and never used, including the valves, gears, liners, pistons, rods, head gasket, and rod packing, equipped with pulsation dampener. 32’ long x 11’ wide x 7’ high 50,000# weight Price: $72,500 each
GARDNER DENVER FXO 7-1/2 X 10 MUD PUMP (Ref#10447Rb) skid mounted, 350 Cummins diesel Price: $32,000
GARDNER DENVER FXO 7-1/2 X 10 MUD PUMP (Ref#5295T) Cat 3306 engine, like new, fuel tank Price: $39,500
GARDNER DENVER FXO 7 X 10 MUD PUMP (Ref#250T) 6V71 Detroit engine, mounted on single axle trailer with air brakes, good shape Price: $35,000
GARDNER DENVER FXZ 7-1/4 x 12” (Ref#8810R) Trailer mounted, suction rod, suction strainer, twin GMC 150 hp engines, flywheel, belt guards, totally rebuilt 2011 Price: $100,000
GARDNER DENVER 7-1/4 X 12” MUD PUMP (Ref#10428Tb) new pistons, propane engine Price: $44,500
GARDNER DENVER FXZ 7 1/4 X 12 MUD PUMP (Ref#6414RB) 6” liners, trailer mounted with Detroit 8V71 engine Price: $80,000
GARDNER DENVER FXZ 7 X 12 MUD PUMP (Ref#6602RD) only 1300 hours on new 12 Liter Volvo engine, air clutches, skid mounted, 20’L x 9’7”W x 8.4”H, 40,000# Price: $45,000
GARDNER DENVER 7 1/2 X 10 MUD PUMP (Ref#14202RB) 4 cyl Detroit engine, skid mounted Price on Request
GARDNER DENVER 7 X 10” FXZ MUD PUMP (Ref#853Nc) skid mounted, 671 Detroit diesel engine, POR
GARDNER DENVER FXD-172 MUD PUMP (Ref#8644Te) Price: $20,000
GARDNER DENVER 5-1/2 X 8 MUD PUMP (Ref#3017T) 62 hp diesel engine, gears 90%, skid mounted Price: $42,500
GARDNER DENVER 5-1/2 X 8 FXN DUPLEX MUD PUMP (Ref#6678T) Cast fluid end, 671 Detroit, Spicer 6853-C transmission, hydraulic pump, air controls, 1” hyd hoses, skidded Price: $44,500
GARDNER DENVER 5-1/2 X 8 MUD PUMP (Ref#14066Tb) only 60 hours, trailer mounted Price: $27,500
GARDNER DENVER 5-1/2 X 8 MUD PUMP (Ref#9782Ta) New 2014, used 5 years, extra swabs and liners, ready to use Price: $36,500
GARDNER DENVER 5-1/2 X 8 DUPLEX MUD PUMP (Ref#10501Td) Rebuilt and complete with hydraulic drives Price on Request
GARDNER DENVER 3FXX172 5-1/2 X 8 MUD PUM POWER END (Ref#3207Tb) Price: $38,000
GARDNER DENVER 5-1/2 X 10 MUD PUMP (Ref#433Ta) new fluid end, new clutch, diesel poiwer, mounted on trailer, runs great PRICE: $34,000
GARDNER DENVER 5 1/2 X 10 MUD PUMP (Ref#3261Rb) 6 cylinder Cummins diesel engine, hand clutch, 5 speed transmission, 5-1/2” liners, skid mounted, 10” stroke, ready to work Price on Request
GARDNER DENVER 5 X 10 DUPLEX MUD PUMP (Ref#3373Tc) Cummins engine, mounted on tandem axle lowboy trailer Price: $18,500
GARDNER DENVER 5 X 10 MUD PUMP (Ref#1480Tb) air driven, used with cement for grouting wells, sitting 3-4 years, valves will need rebuilding, trailer mounted, air over hydraulic brakes, includes 28 joints of 21’ pipe Price: $39,500
GARDNER DENVER 5 X 10 MUD PUMP (Ref#5882Tb) 453 Detroit engine, battery start, mounted on oilfield skid with axles, starts and runs Price: $14,500
GARDNER DENVER FDFXDH MUD PUMP (Ref#14457T) 4” inlet, 3” outlet, pulsation dampern, new piston and rods, engine has been removed Price: $40,000
GARDNER DENVER 5 X 10 MUD PUMP AND GARDNER DENVER 5 X 8 MUD PUMP (Ref#6082T) no engine, both were removed from rig Price for both pumps: $29,500
5-1/2 x 8” GARDNER DENVER MUD PUMP (Ref#4523N) Manufactured 1960’s, rebuilt a couple years ago, skid mounted, 4 cylinder Detroit engine, used Supercharger, 637 hours on it, runs good, needs cosmetic work Price: $32,500
GARDNER DENVER 5 X 8 DUPLEX MUD PUMP (Ref#3373Tb) 6 cylinder Isuzu diesel engine Price: $20,000
GARDNER DENVER 5 x 8 MODEL FDFXDG DUPLEX MUD PUMP (Ref#8406Td) Cummins V504P (195 hp) engine, skid mounted Price: $42,000
5 x 8 GARDNER DENVER DUPLEX MUD PUMP (Ref#755Nb) on tandem axle trailer with 371 Detroit diesel engine Price on Request
GARDNER DENVER MUD PUMP (Ref#7397T) running condition, diesel engine, mounted on trailer with new tires Price: $13,500
5 X 6 MUD PUMP (Ref#538T) no engine, skid mounted, rebuilt Price: $18,500
FAILING 5 X 6-1/4” MUD PUMP (Ref#7865T) needs new pistons, bare pump Price: $4,800
GARDNER DENVER 5 X 6 MUD PUMP (Ref#2328Tb) no engine, unmounted Price on Request
GARDNER DENVER 5 X 6 MUD PUMP (Ref#282Tb) Taken off IR TH60 rig Price on Request
GARDNER DENVER 5 X 6 FXG MUD PUMP (Ref#10220Tb) bare pump, (old style), good condition Price: $24,000
GARDNER DENVER 5 X 6 MUD PUMP (Ref#10741Ta) skid mounted, Detroit engine, 3-speed transmission Price: $24,500
GARDNER DENVER 5 X 6 FXG172 MUD PUMP (Ref#9278Tb) Price on Request
GARDNER DENVER FG-FXG 5 X 6 MUD PUMP (Ref#3510R) Detroit diesel engine, mounted on tandem axle trailer, one suction and one discharge hose included Price: $39,500
GARDNER DENVER 5 X 6 MUD PUMP (Ref#3261Rc) skid mounted with John Deere gas engine, broken manifold exhaust Price on request
GARDNER DENVER 5 X 6 AIR DRIVEN MUD PUMP (Ref#7778RB), complete but needs rebuild Price: $10,500
GARDNER DENVER 5 X 6 AIR DRIVEN MUD PUMP (Ref#7778RC) with trailer Price: $19,500GARDNER DENVER 5 X 6 MUD PUMP (Ref#4513Ta) skid mount with Deutz diesel engine, fully set up and ready to run Price on Request
GARDNER DENVER 5 X 6 MUD PUMP (Ref#13203T) electric drive, in custom skid, fully rebuilt gear end and fluid end, excellent condition Price: $22,500
GARDNER DENVER FXG 5 X 6 MUD PUMP (Ref#11652RA) with Detroit engine, skid mounted Price on Request
GARDNER DENVER 5 X 6 MUD PUMP (Ref#13101Ra) old style
GARDNER DENVER 5 X 6 MUD PUMP (Ref#11990T) no engine, unmounted, liquid fluid end, needs rebuilt Make Offer
GEFCO 5 X 6 MUD PUMP (Ref#11938T) Removed from rig, hydraulic driven, 0 hours after rebuilt, includes rebuild kit Price on Request
GARDNER DENVER 4 x 6 DUPLEX MUD PUMP (Ref#7756Tb) Detroit 671 diesel engine, stick shift transmission, tubing racks, skid mounted Price: $29,500
GARDNER DENVER 4-1/2 X 5 MUD PUMP (Ref#6971Tc) hydraulic drive Price: $16,500
GARDNER DENVER 4 X 5 MUD PUMP (Ref#2115T) 6 cyl Ford 300 gas engine, self contained trailer mounted Price: $13,500
GARDNER DENVER FXF-DE8 4 X 5 MUD PUMP (Ref#10148T) Manufactured 1996, new condition of gear and fluid ends, no engine, new 4” liners, new pistons, new chrome rods, new valves, new liner studs in head, new suction flange and gasket, new 2” steel discharge flange Price: $13,500
FAILING 4 X 5 MUD PUMP (Ref#7865Tb) bare pump Price: $4,000
FAILING 4 X 4 MUD PUMP (Ref#4244T) no engine, good condition POR
4 x 5 GARDNER DENVER MUD PUMP (Ref#1653N) skid mounted, Detroit diesel Price: $15,000
4 x 5 GARDNER DENVER FXG-172 MUD PUMP (Re#137T) no engine Price: $11,500
5” x 6” GARDNER DENVER PISTON PUMP (Ref#9667Rb) new sleeves, new piston, rods and piston heads Price: $23,500
5” x 6” GARDNER DENVER MUD PUMP (Ref#3538) Manufactured 1996 - skid mounted, Ford diesel 70 hp, Price: $15,000
GARDNER DENVER 5 X 6 MUD PUMP (Ref#2346R) hydraulically driven Price: $13,500
GARDNER DENVER 5 X 6 HYDRAULICALLY DRIVEN MUD PUMP (Ref#2505T) approx. 2500 hours, unmounted, (taken off a rig), fluid ends have not been rebuilt POR
GARDNER DENVER 4 X 8 MUD PUMP (Ref#7349TB) Skid mounted, on trailer, less than 100 hours on 460 diesel engine, 2” liners Price: $52,500
GARDNER DENVER PE5U 4X5 TRIPLEX MUD PUMP (Ref#11077c) powered by Cat 3306 diesel engine, Eaton 5-speed transmission, manifold, enclosed building Price: $72,500
GARDNER DENVER TEE PUMP (Ref#1654T) Manufactured 1998, 1602 hours, 4" plungers with hydraulic charge pump, Detroit Series 50 (rebuilt), 5 speed, Skid mounted with fuel tank, Rebuilt expendables with seals, valves, seats, packings and gaskets. Price: $72,500
GARDNER DENVER TEE PUMP (Ref#1654Tb) 1148 hours, Detroit Series 50, 5 speed transmission, hydraulic charge pump Price: $72,500
GARDNER DENVER TEE MUD PUMP (Ref#4692Tc) diesel engine, skidded Price: $25,000
GARDNER DENVER TEE MUD PUMP (Ref#6440T) New, unused, manufactured 2014, 4 available, bare pumps Price: $39,500 each New Cat C7 engines available at additional cost
GARDNER DENVER 4 X 5 MUD PUMP (Ref#8390Tb) 4 cyl Ford motor, mixing/receiving mud tub, skid mounted Price: $7,000
GARDNER DENVER TEE 4 X 5 TRIPLEX MUD PUMP **NEW** (Ref#9115R) 4” piston and liners, well servicing valve and seats, bare pump, extras a extra cost, 2 available (1 plunger and 1 piston) Price bare pump: $64,000
GARDNER DENVER PUMP PACKAGE (REF#108N)
- Gardner Denver TEE 3 x 5 pump, 3000#, pump skid, 6V-71 Detroit diesel engine, 5 SP, 93”W x 233”L x 100”H
- Gardner Denver TEE 3 x 5 pump, 3000#, pump skid, 6V-71 Detroit diesel engine, 5 SP, 100”W x 216”L x 102” H
Located Canada
PRICE: $60,000
GARDNER DENVER 3 X 5 FXG-172 DUPLEX MUD PUMP (Ref#15252Tb) no engine, bare pump, new never used Price: $24,500
4” GODWIN DRY PRIME PUMP (Ref#8337Td) 4 cyl Yanmar diesel engine, 4113 hours, includes approx 250’ of lay flat hose and approx 100’ suction hose Price on Request
DUPLEX MUD PUMPS- USED AND REBUILT (Ref#7814N)
AVAILABLE IN 2 MONTHS AFTER REBUILT
(1) NATIONAL C250 DUPLEX MUD PUMP 7-1/4 x 15”, New fluid end parts, bolt on valve cover, Rebuilt gear end, Pulsation dampener, new Cat C15 diesel or 12V71 diesel engine, Electric start, Controls, gauges, safety shut off, Master skid Price with Cat engine: $135,000 Price with Detroit engine: $120,000
GARDNER DENVER FXK 7 1/4 x 14” DUPLEX MUD PUMP New fluid end part, Rebuilt gear end, Detroit 12V71 diesel engine, Electric starter, Controls, gauges, Safety shut off Price: $80,000
(2) NATIONAL C-150 DUPLEX MUD PUMP 6 ¾ x 12” 250 gpm / 550 PSI, New fluid end part, Rebuilt gear end, Pulsation dampener, Detroit diesel engine, Electric start, Controls, safety shut down, Master skid Price: $80,000 6 weeks delivery
7” x 12” WHEATLEY DUPLEX MUD PUMP (rebuilt), Model 27-12, powered by rebuilt 671 Detroit diesel engine, rebuilt gear end and fluid end, with all new fluid end parts, hand clutch, pulsation dampener, rod lubricating gland, pressure gauge, pressure relief valve, belt drive, belt guard, fuel tank, battery start, mounted on oilfield skid, cleaned and painted, guaranteed for 6 months, delivery 12 weeks after order Price: $42,000 Delivery 12 weeks
CENTERLINE 7-1/2 X 10 DUPLEX MUD PUMP (Ref#932T) Manufactured 2008, currently mounted on a drill rig, working condition Price: $49,500
CENTERLINE 7-1/2 X 10 MUD PUMP (Ref#14556Tb) high pressure, no engine, needs retaining liner cage and (1) side suction manifold needs replacing, unmounted Price: $39,500
14 x 7 MUD PUMP (Ref#10681Ta) with engine Price: $40,000
WHEATLEY 6 X 6 MUD PUMP (Ref#4827T) bare pump, no motor, good condition Price: $7,000
WHEATLEY 5 X 10 MUD PUMP (Ref#11739T) Skid mounted, Detroit 471 engine Price: $19,500
WHEATLEY 5 X 10 MUD PUMP AND KING SWIVEL (Ref#1557Nm) 20 bbl tank, mounted on gooseneck double axle dual tires trailer, 1995 International single axle tractor, hoses, hydraulic valves and hoses Price: $95,000
WHEATLEY 5 X 8 MUD PUMP (Ref#10681Tb) no engines, unmounted
CONTINENTAL EMSCO D500 DUPLEX MUD PUMP (Ref#5074Tb) Trailer mounted, Detroit Series 60 diesel engine 14L, 40’ tandem axle trailer with hydraulic leveling jacks, currently working Price: $87,500
EMSCO D500 MUD PUMP (Ref#6593T) Cat D353 engine, does not run, mounted on oilfield skid Price: $50,000
EMSCO D500 DUPLEX MUD PUMP (Ref#6329T) 16” stroke, 500 hp, ductile iron fluid end, Cat D353 diesel engine with radiator, 640 hp, 1300 rpm, inline 6 cylinder, 4 stroke, 6-1/4” bore x 8” stroke, (1473 in3) displacement, turbo charged (air to air aftercooled) aspiration, capable of 268 gpm @ 2720 psi with 4-3/4” pistons or 751 gpm @ 970 psi with 7-1/2” pistons. Price: $37,500
EMSCO D500 DUPLEX MUD PUMP (Ref#6118Rh) Emsco D500 duplex mud pump with steel fluid end, Hydril K-20-3000 pulsation dampener, belt driv with Cat D379 diesel engine, air starter, radiator, air clutch, mounted in 12’ x 29’L mud pump house with parts bin, controls Price on Request
EMSCO D500 DUPLEX PUMPS (Ref#8722R) Two available, Cat 3406C diesel engine, Cotta gear box, mounted in enclosed building 11’6” x 30’ Price: $70,000
EMSCO D500 4-3/4 – 7-1/2” X 16” DUPLEX MUD PUMP (Ref#8312Tc) 500 hp, Mounted on skid with Cat D353 engine, capable of 268 gpm @ 2720 psi with 4-3/4” pistons or 751 gpm @ 970 psi with 7-1/2” pistons, sold as is Price: $27,500
EMSCO D500 4-3/4 – 7-1/2” X 16” DUPLEX MUD PUMP (Ref#8312Td) 500 hp, Mounted on skid with twin Detroit engines, capable of 268 gpm @ 2720 psi with 4-3/4” pistons or 751 gpm @ 970 psi with 7-1/2” pistons, sold as is Price: $27,500
EMSCO DA-500 4-3/4 – 7-1/2” X 16” DUPLEX MUD PUMP (Ref#8312Te) 500 hp, Mounted on skid with Cat D353 engine, capable of 268 gpm @ 2720 psi with 4-3/4” pistons or 751 gpm @ 970 psi with 7-1/2” pistons, sold as is Price: $27,500
EMSCO D375 7-1/2 x 14” (Ref#732Nb) no power, skid mounted in metal house, 10’ wide Price: $43,000
Emsco 6-1/2” x 12” mud pump (ref#7542Ra) p/b 6V92 Silver Detroit 350 hp engine, skid mounted Price: $50,000
EMSCO D175 6-3/4” x 12” (Ref#732Nc) powered by twin 671 Detroit engines, on skid, battery start, controls, gauges, suction hose Price: $40,000EMSCO D300 (Ref#3336T) Detroit 60 Series engine Price: $32,500
CONTINENTAL EMSCO D300 MUD PUMP (Ref#10287Tc) 14” stroke, powered by twin Detroit 671 engines, mounted on skid Price: $54,500
EMSCO D-300 6 X 14 DUPLEX MUD PUMP (Ref#3360Tb) Excellent condition, skid mounted on tandem axle heavy duty lowboy trailer, fluid end rebuilt with new 6” liners, liner cages, piston rods, swabs, rod packing, oiler pump, new Mattco end plug, Detroit 8V71 engine (good condition) Price: $44,500
CONTINENTAL EMSCO D175 7 X 12” MUD PUMP (Ref#12068Nb) powered by 8V71 Detroit engine, flued end and engine rebuilt, all new expendables, junk box, fuel tank, air compressor and air clutch, skidded. Price: $100,000
EMSCO D300 DUPLEX MUD PUMP (Ref#8210N) 7 1/2 x 14, Matco steel fluid end with screw off caps, Cat 3406 diesel powered, Air chamber, Spare fluid end parts, Air start, Fuel tank, On oilfield skid, Mounted in an 11’ wide metal building, Good condition Price: $120,000
CONTINENTAL EMSCO F350 TRIPLEX MUD PUMP (Ref#5440T) 6” plungers, John Deere Industrial engine, mounted on oilfield skid Price: $76,500
EMSCO 14” DUPLEX PUMP (Ref#3800T) Cat engine, skid mounted, working condition Price: $12,500
GASO 5885-WS QUINTUPLEX PRODUCTION PUMP (Ref#10309T) Pump only. 5” stroke, 300 hp, steel billet fluid end, 2-3/4” ceramic plungers, Delrim disc valves, 838 packing, 6” RF suction connection, 3” RTJ discharge connection, 231 gpm max, 2020 psi, max 360 rpm Price: $82,500
GASO MODEL 5325M TRIPLEX MUD PUMP (Ref#2481T) pump end has all new parts, not used since, electric engine Price: $66,500
GASO 3673WS TRIPLEX PUMP (Ref#6314R) 3 pistons, 6” stroke, steel fluid end, located South America Price: $60,000
GASO 3364 MUD PUMPS (Ref#9104T) Two available, rebuilt, cast ductile iron fluid ends, used for oil service, bare pumps, no engines, unmounted, one is flanged for suction/discharge, one is threaded Price: $20,000 each
GASO 1860 4-1/2 X 6 MUD PUMP (Ref#14394T) Fluid end completely rebuilt, powered by 3 cyl Deutz diesel engine, trailer mounted, hoses and misc parts Price $19,500
GASO MODEL 1742 5 X 10 MUD PUMPS (Ref#3276Rb) John Deere 145 hp reconditioned engine with WPI snap in clutch, 90 gal diesel tank w/lock cap, Dayton oiler pump systemand tank, 4” suction hose and winch boom, 4’ back up bumper guard, front and rear loading hitches, 44” bullwheel with power band belt, large belt guard, 8’ x 17’ base (mud boat) Price: $62,500
GASO 1743 MASTER MUD PUMP (Ref#5522Rb) skid mounted with Cummins engine Price: $47,500
GASO MODEL 1654 MUD PUMP (Ref#6937T) 5 x 8, drive shaft included, new gears and bearings 2019, new pistons and piston sleeves 2021, new valve rubber inserts and valve cup gaskets 2022, very good condition Price: $18,500
GASO 5 X 10 DUPLEX MUD PUMP (Ref#2199T) Skid mounted, Detroit 6V71 engine, 5 speed manual transmission Price: $18,500
GASO 5 X 10 MUD PUMP (Ref#8705Ra), umounted, no engine “Make offer”
GASO T4507 TRIPLEX MUD PUMP (Ref#999Nb) Triplex single acting reciprocating plunger pump, 450 hp, reconditioned rental package, aluminum bronze fluid end with 5-1/2” plungers, 642 gpm@ 1095 psi, new AR valves (3/09), Cat 3406 engine, 260 rpm, max GPM 1039, Max PSI 1200, skid mounted, coolers, controls, gauges Price: $175,000
GASO 1550 MUD PUMP (Ref#5896Rg) trailer mounted, 471 Detroit POR
GASO TULSA MODEL 1550 1-1/2-5 X 10 MUD PUMP (Ref#9278Tc) Price on Request
5x10 GASO MUD PUMP AND TANK SYSTEM (Ref#240N) 350 gpm @ 330# psi, skid mounted trailer w/6V71 Detroit diesel engine, shale shaker 4 X 5 Schrem, 1000 gallon tank, (2) desanders, hydraulic motor on mud pickup pump Price: $65,000
GASO 4 X 6 MUD PUMP (Ref#14556Tc) skid mounted, 100 hp electric motor Price: $13,500
GASO 4 X 6 MUD PUMP (Ref#11652RB) no engine, skid mounted Price: $8,750 each
GASO 4 1/2 X 6 MUD PUMP (Ref#6974Na) no power, unmounted, sitting 4 years Price: $6,500
AMERICAN DUPLEX MUD PUMP - NEW (Ref#14063N) Model AXG (FG-AXG), capacity (with 5” liners) 200 gpm (757) x 310 psi (21 kgcm2), @ 100 rpm, bare pump, no engine Price: $25,000
AMERICAN FFA-XFZ 5 X 5 PISTON PUMP (Ref#10769R) 140 hours, 150 gpm, 160 psi, 1 year old POR
UNION T68 TRIPLEX MUD PUMP (Ref#999Na) Triplex single acting reciprocating plunger pump, 6” plungers, 405 hp, 4.95:1 gear ratio, powered by 8V92T Detroit diesel engine and transmission, 617 @ 1061 psi at 210 rpm, Max GPM 620, Max PSI 1060, skid mounted, cooler, controls, gauges Price: $130,000
1600 HP F1600 TRIPLEX MUD PUMP (Ref#1401N) Made in China, electric motor, Model HHF1600, triplex single acting piston type, 7” x 12” max diameter of liner stroke, 120 spm, 1176kW (1600hp) rated power, gear ratio 4.206, 12” stroke of piston, pump valve API 7#, 7” max ID of liner, max working pressure 34.3 MPa (5000 psi), max displacement (130 s/min) 50.42L/s, diameter of discharge pipe 127mm (5”), diameter of suction pipe 304mm (12”), weight 25570kg (56,000 lbs). combined v-belt transmission 800 kw (1072 hp) * 2, 25 (J)-5-7630 V-belt, transmission ratio 2.377, Model YZ08 motor 800kw, 60 hz, Model SB6” 8” J-12 1/2” charging pump, 8” diameter outlet, 6” diameter inlet, 200m3/h displacement, 55kW power of centrifugal motor Price: $425,000
BOMCO 1500 MUD PUMPS (Ref#320Tb) (2) low output DC electric motors, 2 available Price: $99,500 CDN each
1600 HP RS-F1600 MUD PUMP (Ref#4241T) Built in 2014 by Rongshen Machinery (China) Price: $82,500
MSI 600 PUMP DOWN TRAILER (Ref#1958Tc) 60 Series Detroit engine POR
1000 HP CHINES MADE TRIPLEX MUD PUMP (Ref#10352Td) New/unused Price: $62,500
QINGZHOU ORF 1000 HP MZ-9 MUD PUMPS (Two Available) (Ref#2798R) Manufactured 2007 and 2008, 7” x 9” 1000 hp triplex mud pump, 5000 psi pulsation dampener, 5-star 5x6 centrifugal pump 50 hp electric motor, suction screen, centrifugal rod oiler, (2) 2005 Detroit diesel 560 14L 665 hp w/ zero hours, electric start, radiator, gauges, Wichita power grip clutch, all master skidded Price: $255,000
CONTINENTAL EMSCO MODEL FC2200 TRIPLEX MUD PUMP (Ref#2280T) Complete without traction motors. 9” bore x 15” stroke, single acting, working pressure up to 7500 psi, (3) interchangeable forged steel fluid end modules with separate suction and discharge sections, Premium grade fluid end expendables with 6-1/2” pistons and liners, suction manifold with (3) 12” flanged inlets, SD8 suction desurger, pressure manifold with (2) 5-1/8” 10,000# API flanged outlets, liner wash system, 1 x 1-1/2” mission centrifugal pump p/b 3 hp electric motor, external power end lubrication pump, steel skid, suction line pressure relief valve, set of standard service tools Price: $325,000
CONTINENTAL EMSCO STYLE F-1000 (Ref#1939Na)
F-1000 Triplex Single Acting Mud Pump
All steel fabricated frame and eccentric crankshaft.
Wear-resistant crossheads and guides
Three (3) interchangeable FORGED steel fluid ends, each with threaded valve pot and cylinder head
covers, piston rods, liner lock and valve guides
Positive pressure lubrication of power end provided with internal gear pump.
Discharge manifold with Two (2) 4" 5000 Lbs. API flanged outlets
Suction manifold with Three (3) 10" flanged inlets with Two (2) companion flanges, One (1) 10"
threaded and One (1) 10” blind; remaining flanged inlet for mounting suction dampener
Pulsation dampener complete with 10" mounting flange and air valve
API #6 valves and seats with stainless steel springs
6" premium grade piston and liners. Fits API SA-4 piston rods.
NOTE: Other sizes and types available upon customer request
Liner wash system – one 1" × 1 1/2" centrifugal pump, 90 gallon reservoir, hoses and spray rings.
Strainer assembly complete with Two (2) 4" 5000# API studded outlets and One (1) inlet and One (1)
4” 5000# API ring joint flange outlet for pulsation dampener
Pulsation Dampener support for supporting strainer block and dampener.
Accessory manifold complete with One (1) 4" 5000# API flanged inlet and Two (2) outlets; One (1)
outlet with 3" NPT connection for relief valve and One (1) outlet with 2" NPT connection for pressure
gauge. Less gauge and valve.
One (1) Flange and fittings for strainer cross including studs, nuts, ring gaskets, flanges and fittings for
installing pulsation dampener, relief valve and pressure gauge
One (1) Relief valve, 3" 5000 psi Shear type
One (1) Pressure gauge
Structural Steel Three-Runner Skid
One year product quality manufacturer warranty
Gear Ratio: 4.207:1
Gross Weight: 41,000 lb
Pinion Shaft Extend (Diameter × Length): 7.75” × 13.23”
Suction Flange: 12”-NPT
Discharge Flange: 5-1/8”
Overall Length: 14 ft.
Overall Width (Without Strainer Block): 10.39 ft (7.71ft)
Overall Height (Without Pulsation Dampener): 5.91 ft
F-1000 Triplex Pump - Sizes and Ratings |
|||||||||||
Liner Size |
Displacement |
Maximum Pressure |
Pump SPM |
Input |
Input |
||||||
Dia. |
Stroke |
Per Stroke |
Per Minute |
||||||||
inch |
inch |
mm |
Gal. |
Lit |
Gal. |
Lit. |
PSI |
MPA |
|||
6-3/4 |
10.0 |
254 |
4.58 |
17.4 |
640 |
2432 |
2378 |
16.4 |
140 |
1000 |
735 |
6-1/2 |
4.23 |
16.1 |
602 |
2288 |
2552 |
17.6 |
|||||
6-1/4 |
3.92 |
14.9 |
558 |
2120 |
2769 |
19.1 |
|||||
6 |
3.61 |
13.7 |
514 |
1953 |
3001 |
20.7 |
|||||
5-1/2 |
3.04 |
11.6 |
431 |
1638 |
3567 |
24.6 |
|||||
5 |
2.50 |
9.5 |
357 |
1357 |
4321 |
29.8 |
|||||
4-1/2 |
2.11 |
8.0 |
298 |
1132 |
5162 |
35.6 |
|||||
Note: mechanical efficiency 90%; volumetric efficiency 100%.
Made in China to API specifications. Immediately available USA.
Price: $120,000
CONTINENTAL EMSCO STYLE F-1000 UNITIZED (Ref#1939Nb)
PUMP UNITIZATION
-F-1000 mud pump is built to API specs under API 7K license.
-Master skid is standard oilfield three runner skid. Skid extended beyond engine approx 2’-0”, for protection at loading and unloading.
-Loading hitch is 7’-10” long for winch truck loading and unloading.
-F-1000 mud pump is driven by diesel engine (Caterpillar 3512DITA, 1250 HP @
1200rpm) through WPT power grip 321. The unit is complete with a bull wheel, a set of V-belts, belt guard, a drive assembly and screw devices for tightening belts.
-The unitization includes an electric motor powered supercharging pump piped to the suction of the mud pump, an electric powered liner wash pump mounted and piped, engine and WPT power grip 321 controls at area of engine arrangement, industrial coating on all parts and labor to clean & make ready for shipment.
F-1000 MUD PUMP
-Model: F-1000
-Type: Triplex liner single-action
-Input power: 1000 HP
-Maximum stroke: 10” (254mm)
-Maximum working pressure: 5,000 PSI (35 MPa)
-Gear type: Integral herringbone
-Valve pots: API 6 #
-Intake: 12” (305 mm)
-Discharge: 4” (102 mm)
-Pulsation dampener Model: KB-75
-Strainer: Mounted on discharge manifold out let.
CAT 3512DITA DIESEL ENGINE
-Model: CAT 3512DITA-Air start
-Rated power: 1250 HP
-Rated speed: 1200 RPM
-Rotation direction: Contraclockwise (facing flywheel)
-Outfitted w/ muffler & expansion joint.
CLUTCH – WPT POWER GRIP 321
-Max. speed: 1,525 RPM
-Static torque: 3,434,400 FT-LBS
-Dynamic torque: 2,574,000 FT-LBS
-Net weight: 738 LBS
CHARGING PUMP SYSTEM
Charging pump assembly includes explosion proof motor (dII BT4, IP55, class 4) and centrifugal pump.
-Type: SB6Ｘ5-14
-Displacement: 779 GPM
-Head: 105’
-Speed: 1750 RPM
-Seal type: Mechanical seal
-Motor power: 75 HP
-Motor voltage: 460V, 60Hz
MANIFOLD
-Pump suction manifold is 12”, and intake flange diameter is 12”. A 12” valve is used in suction manifold. And two suction solutions are alternative, pump charging and self-suction.
-The intake diameter of charging pump is 6”.
-The outtake diameter of charging pump is 5”.
-Discharging manifold includes gages, relief valve, and discharge flange.
TESTING & COMMISSIONING
- Install and secure major equipment and miscellaneous equipment
- Furnish lube products for testing
- Run diesel engine to test the unitization & pump, will run at full load 2 hours.
OVERALL DIMENSION AND GROSS WEIGHT
-Overall dimension(L×W×H): 315”×170”×114”
-Master skid dimension(L×W): 315”×120”
-Unitization gross weight: 79000 LBS
DOCUMENTATION
- Operating & Maintenance Manuals (1 set)-English
- Product Certificate (1 set) -English
- Part list Manual of mud pump (1set) –English
F1000 Unitization with CAT 3512DITA engine running at 1200 RPM and driving through a WPT power grip 321 and a belt reduction: |
|||||||||
WPT 321-Belt |
6" Liner |
|
|
|
|
|
|
|
|
Item |
Eng. |
WPT321. |
Trans. |
Belt |
Pinion |
Pump |
Stroke |
Disp. |
Disp. |
1 |
1200 |
1.00 |
1200 |
2.038 |
589 |
4.206 |
140 |
3.673 |
514 |
2 |
1200 |
1.00 |
1200 |
2.038 |
589 |
4.206 |
140 |
3.673 |
514 |
3 |
1200 |
1.00 |
1200 |
2.038 |
589 |
4.206 |
140 |
3.673 |
514 |
4 |
1200 |
1.00 |
1200 |
2.038 |
589 |
4.206 |
140 |
3.673 |
514 |
Made in China to API specifications.
Price: $425,000
UNITIZED F-1000 MUD PUMP W/ CAT 3512 ENGINE (Ref#7389N)
PUMP UNITIZATION
-F-1000 mud pump is built to API specs under API 7K license.
-Master skid is standard oilfield three runner skid. Skid extended beyond engine approx 2’-0”, for protection at loading and unloading.
-Loading hitch is 7’-10” long for winch truck loading and unloading.
-F-1000 mud pump is driven by diesel engine (Caterpillar 3512DITA, 1250 HP @ 1200rpm) through WPT power grip 321. The unit is complete with a bull wheel, a set of V-belts, belt guard, a drive assembly and screw devices for tightening belts.
-The unitization includes an electric motor powered supercharging pump piped to the suction of the mud pump, an electric powered liner wash pump mounted and piped, engine and WPT power grip 321 controls at area of engine arrangement, industrial coating on all parts and labor to clean & make ready for shipment.
F-1000 MUD PUMP
-Model: F-1000
-Type: Triplex liner single-action
-Input power: 1000 HP
-Maximum stroke: 10” (254mm)
-Maximum working pressure: 5,000 PSI (35 MPa)
-Gear type: Integral herringbone
-Valve pots: API 6 #
-Intake: 12” (305 mm)
-Discharge: 4” (102 mm)
-Pulsation dampener Model: KB-75
-Strainer: Mounted on discharge manifold out let.
CAT 3512DITA DIESEL ENGINE
-Model: CAT 3512DITA-Air start
-Rated power: 1250 HP
-Rated speed: 1200 RPM
-Rotation direction: Contra clockwise (facing flywheel)
-Outfitted w/ muffler & expansion joint.
CLUTCH – WPT POWER GRIP 321
-Max. speed: 1,525 RPM
-Static torque: 3,434,400 FT-LBS
-Dynamic torque: 2,574,000 FT-LBS
-Net weight: 738 LBS
CHARGING PUMP SYSTEM
Charging pump assembly includes explosion proof motor (dII BT4, IP55, class 4) and centrifugal pump.
-Type: SB6Ｘ5-14
-Displacement: 779 GPM
-Head: 105’
-Speed: 1750 RPM
-Seal type: Mechanical seal
-Motor power: 75 HP
-Motor voltage: 460V, 60Hz
MANIFOLD
-Pump suction manifold is 12”, and intake flange diameter is 12”. A 12” valve is used in suction manifold. And two suction solutions are alternative, pump charging and self-suction.
-The intake diameter of charging pump is 6”.
-The outtake diameter of charging pump is 5”.
-Discharging manifold includes gages, relief valve, and discharge flange.
TESTING & COMMISSIONING
- Install and secure major equipment and miscellaneous equipment
- Furnish lube products for testing
- Run diesel engine to test the unitization & pump, will run at full load 2 hours.
OVERALL DIMENSION AND GROSS WEIGHT
-Overall dimension(L×W×H): 315”×170”×114”
-Master skid dimension(L×W): 315”×120”
-Unitization gross weight: 79,000 LBS
Available near Texas.
Price: $575,000
EWCO WH-600 TRIPLEX MUD PUMP (Ref#1183N) Manufactured 1984, good condition, powered by (2) Cat 3408 engines, mounted on oilfield skid, located Southeast Asia, immediately available Price: $190,000
(2) EWECO 1000 HP MUD PUMPS (Ref#1350R) New, never used Price: $950,000 each
NEW CONTINENTAL EMSCO STYLE F-1000 TRIPLEX MUD PUMP (Ref#1287N) triplex single action piston, max. liner size x stroke 170 x 254mm (6-34” x 10”), 140 r/min strokes rating, 753kW (1000 hp), Herringbone gear, 4.207:1 gear ratio, pressure and splash lubrication, 12” flange suction inlet, 5-1/8” flanger 5000 psi discharge outlet, 7-3/4” pinion shaft dia., 2” x 2” key, valve-over-valve API#6, approx weight 41,420 lb, fully interchangeable with Continental Emsco parts, complete with pulsation dampener, suction discharge, pressure gauge, complete fluid end expendables, guaranteed for one year, delivered to Houston from China factory, 2 available Price, delivered to Houston: $185,000 each (30% deposit with order, balance due when shipped from China)
CONTINENTAL EMSCO F-1000 MUD PUMP (Ref#5850R) no engine, 8000 hours Make offer
CONTINENTAL EMSCO F-800 TRIPLEX MUD PUMP (Ref#664T) 800 hp, 6-3/4”, forged steel fluid end, 50003 pulsation dampener, 3” Shear relief valve, skidded Price: $37,500
OFM 600 TRIPLEX MUD PUMP(Ref#2497T) Manufactured 2018, 1800 hours, very excellent condition, Detroit 60 Series engine, Allison transmission, 800 psi, dims/weight 20’ x 10’ x 8’, 20,000 lbs Price: $320,000
AXON HD-500 TRIPLEX PLUNGER PUMP (Ref#975T) 14 liter Detroit Diesel, 6061 Allison automatic transmission, rebuilt power end, new expendables in fluid end, new charge pump, skid, tanks, Pilfer 5 valve manifold, 15k fluid end, new paint Price: $215,000
BETHLEHEM H150 MUD PUMP (Ref#5896Re) 10” suction POR
WILSON 600 DUPLEX MUD PUMPS (Ref#9529Ra) Two available, 8V71 Detroit engine Price: $105,000
WILSON 600 DUPLEX MUD PUMP (Ref#2757Ta) (2) available, bare pumps, no engines Price: $25,000 each
WILSON SNYDER MUD PUMPS (Ref#15581R) (2) available, skid mounted with Waukesha gas/propane engine, very low hours Price: $9,500 each
4 X 5 MISSION MAGNUM SANDBLASTER MUD PUMP (Ref#11425R) with hydraulic motor, only 40 hours Price: $12,500
MUD PUMP WITH COMPOUNDED 4 X 5 CENTRIFUGAL PUMP (Ref#14663a) Cat 3306 engine, mounted on dual axle trailer Price: $20,000
MUD PUMP WITH COMPOUNDED 4 X 5 CENTRIFUGAL PUMP (Ref#14663b) Cummins engine, mounted on dual axle trailer Price: $20,000
MISSION 3 X 4 PUMP (Ref#10765T) Trailer mounted POR
MISSION 3 X 4 PUMP (Ref#8752Ra) POR
MISSION MAGNUM 2 X 3 PUMP (Ref#6971Td) Two pumps on skid with 20 hp motors Price: $3,900
RUPE PUMP (Ref#6971Tb) needs hydraulic control Price: $11,500
WILDEN M8 AIR DIAPHRAGM PUMP (11501T) extra set diaphragms
AERMOTOR 66A80 10 HP 6” SUB PUMP Franklin Motor 230 Vac single ph with control box, mfg 1992, used rfor (1) 48 hr pump test
BRAND NEW IN BOX AERMOTOR A+35 SS-500 4” SUB PUMP, complete with Franklin 3 phase 230 VAC motor date code 6, no control box
BEAN PUMP (Ref#8752Rb) POR
FMC BEAN PUMP MODEL L1122DI (Ref#3916T) 122 hp, 91 kw, 1750 max rpm, 127 gpm, 519 lpm, 1300 psi, 9063 kpa, Baldor ECP4409T 100 hp motor, 1200 rpm synchronous speed, 60hz frequency, 460V (3P) Price on Request
FMC HYDRAULIC HIGH PRESSURE PUMP (Ref#5653Rc) Price: $4,500
FMC TRIPLEX PUMP (Ref#3979T) Rated for 5000 psi, year 2000 (used as city sewer jetting unit), 730 hours Price: $6,500
PARTEK JETTING PUMPS (Ref#3979Td) 20 gpm @ 10000 psi, 150 hp electric motors (needs electrical panels, otherwise complete) Price: $9,000 each
HYDRAULIC PUMP WITH KUBOTA ENGINE (Ref#5073T) Lofa Industries hydraulic pump (6.2 hours) with Kubota V3800T engine, Hydac ELD cooling system Price: $24,500
Bean 35 mud pumps (Ref#7739R) completely rebuilt, skid mounted with Deutz diesel engine, 4 speed transmission, low 50 hours, stored inside Price: $14,000
BEAN 35 PUMPING UNIT (Ref#4292Ra) trailer mounted, Wisconsin engine, battery start Price: $7,500
SPRAGUE SYSTEM 0-55 GPM, 3500 PSI DUAL SYSTEM PORTABLE TURBO DIESEL HYDRAULIC PUMP (Ref#9235R) New Unit. High pressure, low volume, self-contrained. Capable of 5000 psi intermittent duty, designed for low maintenance and flow operation. A single adjustable back pressure regulating circuit allows operator to adjust aircraft reservoir return condition and maintains a positive reservoir head pressure on the aircraft without fluid loss. This feature allows the system to be used on drilling rigs with different reservoir pressure requirements. Lighted control panel. Automatic over temperature shut down, Reservoir high/low level automatic shutdown, Safety circuit boost pump pressure switch, loss of boost pump pressure automatically shuts system down, Phase reverse relay (does not allow pump to turn in wrong rotation), Automatic air removal device (this removes the air from the oil returning from the rig at flows up to 55 gpm automatically; results are no cavitation, longer pump life, quiet system. Reservoir drain valve, Parking brake instrument panel lights 100 hp drive motor (Deutz 125 hp), International Reservoir and system fluid emperature indicator. Chassis has a 2-wheel mechanical parking brake. The lower portion of the chassis serves as f ull sized drain pan with drain valve. Cabinet is skydrol resistant stainless steel. Removable cover assembly for major maintenance with access doors for inspection and minor maintenance. Price: $185,000
HYDROPLEX 15K TEST PUMP (Ref#2496R) Manufactured 2012, 15 gallons per minute, mounted on 2008 GMC C6500 truck with diesel engine, control box, manifold, 550 gal heavy duty Snyder Megatainer tank, 123,896 miles on truck Price: $85,000
1000 HP CENTERIFLIFT (BAKER HUGHES) SUMP PUMP (Ref#5526R) 1200 gpm, Electric DC, Manufactured 2008
PUMP SELECTION |
INTAKE |
DISCHARGE |
Pump Selected |
Pressure |
22.07 PSI |
972 PSI |
IMW 15-1000WJJ1200A |
Flowrate |
1211 gpm |
1208 gpm |
Pshaft RPM 3444 |
Specific gravity |
0.991 rel-HSO |
0.994 rel-H2O |
Pump shaft HP 58.9hz=859 (58%) |
Viscosity |
0.627Cp |
0.651Cp |
Required motor HP at 60 hz=890 |
|
|
|
|
SEAL SELECTION |
|
|
|
Well angle (set depth = 0.005 deg fm vert. |
Oil temperature at thrust chamber = 180 deg F |
||
No sand present |
Champer Cap used (top to Bot) = |
||
Pump uses fixed type stages |
32% 21% |
||
Motor/Seal oil type – CL4 |
Thrust bearing load = 47% |
||
Seal selected: ISFB3 (875 Series) |
Shaft load = 44% |
||
Options: EHL |
|
||
|
|
||
MOTOR SELECTION |
|
||
Terminal voltage = 4083.7 V |
Fluid Speed: 6.972 ft/s |
||
Motor Current = 128.4 A |
Shroud ID = 11.08 in |
||
Load acc to N/P. = 89.0% |
Internal Temp = 82 deg F |
||
Shaft load = 38.6% |
Motor slected: HMI 1000 hp 4160V 143A (725 Series) |
||
|
|
||
CABLE SELECTION |
|
||
Surface length = 100’ |
Wellhead voltage = 4126.8V |
||
Tubing length = 1810’ |
Wellhead kVA 917.4 kVa |
||
MLE length – 40’ |
Voltage drop = 43.1V |
||
Surface Temp = 75 deg F |
Cond Temp (main) = 163F |
||
|
Temp rating = 450 deg F |
||
|
|
||
SURFACE CABLE |
#2/0 STR CELF 5kV 100 ft |
||
MAIN CABLE |
#2/0 STR CELF 5kV 1810’ |
||
MLE CABLE |
#2 MLE-KLHT 5kV 40 ft |
||
|
|
||
CONTROLLER SELECTION |
|
||
Input kVa = 807 kVA |
Voltage input = 480V |
||
System kW = 774.8kW |
Max Well Head Volts – 4127V |
||
Max Ctrl Current = 1103.5A |
Max Frequency = 58.9Hz (8.15V/Hz) |
||
Power Cost/KwH = 0.05$/kW |
Start Frequency = 10 Hz |
||
Total Power Cost = $27891/month |
Step-up Trafo = 8.597 ratio |
||
|
Selected: VSD 8900-VT 1000kVA/ 480V / 1203A |
||
New cost $550,000
Only 120 testing hours
PRICE: $260,000
SCHAEFER & URBACH BT 80-120 GERMAN MANUFACTURED TRIPLEX MUD PUMPS, POWERED BY AC MOTOR AND GEAR DRIVEN (Ref#6853N) 3 available “LIKE NEW”– Manufactured 2006, Speed Max/Count: 135 SPM, 220 bar – 350 bar (5000 psi), Max. Displacement 4,005 l/min at 150 bar, Max. pressure 1,565 l/min at 350 bar, Elin 6 AC Motor, 690V/75 Hz, 1000 KW, Mounted on skid 8100 mm long x 3000mm wide x 2960 mm high. 45,000kg, Sound level: 63dB(A)@ 7 meters, Operating hours: (1) 1668, (2) 1010, (3) 2069, NOV Mission Magnum 8 x 6 x 14 charge pump, Amtec 36 kw AC Motor, 400/690V/50Hz, NOV Mission Magnum 3 x 2 x 13 liner cooler pump, 2,2 kW AC Motor 400/690V/ 50 Hz, Hydrill K20 pulsation dampener, Zollern gear / mud pump, Located in Europe
PRICE: $620,000 EACH
MUD PUPPY MP255-100 (Ref#2653Ta) Deutz diesel engine, mounted on heavy duty trailer Price on Request
MUD PUPPY 2000 (Ref#7953T) Manufactured 1999, 1000 gal holding tank, (2) 3 x 4 Mission Magnum pumps with mechanical seals, MC255-2C mud cleaner, sand guzzler, Versa-drill rig jacks, Perkisn engine, spare hyd pump and filters, well maintained, ready to work Price: $59,500
CUSTOM BUILT MUD PUPPY (Ref#6133Ta) 800 gallon capacity, mounted on Big Tex trailer, 2” x 4” screen, 200 gpm, manual jack, no engine – runs off rig Price: $25,000
MUD PUPPY MUD SYSTEM (Ref#3572R) 3 x 2 Baker centrifugal pump, powered by 3 cyl Lister, Mud Puppy pick up pump, hydraulic power pack, barrel shaker, desander, dual 2000 gal mud tanks, mounted on gooseneck trailer Price: $60,000
2000 GALLON SHOP BUILT SHALE SHAKER (Ref#15419Tc) 5 x 8 screen, 3 x 4 mission centrifugal pump, desanding cones, 300 gpm pickup pump, 2009 Cummins 110 hp motor with 7,150 hours, mounted on 3 axle trailer Price: $19,500
SHOP BUILT MUD MIXER (Ref#8766T) Moyno pump, on 10 hours on unit Price on Request
MUD PUPPY (Ref#4885Te) Price: $52,500
MUD PUPPY TRIPLEX PUMP (Ref#11925Tb) Built 2012, Price: $265,000
1500 GALLON MUD SYSTEM (Ref#8058T) Duetz 50 hp diesel engine, 3 x 4 circulating pump Price: $29,500
310 BBL 3-COMPARTMENT MUD SYSTEM (Ref#1364N) 10’4” W x 10’2” H x 45’8” L, Tool house, steps, rails, motors and pumps Price: $15,000
EDGE MUD CONDITIONER (Ref#5510RC) 600 gpm, 2 shale shakers, 1 400 gallon trash pump (1 more optional), 4 desander cones, 1 desander “Cobra” circulating pump, pintal hitch, air brakes, tank and system like new (low hours), 1200 gal tank, 4 hyd leveling jacks, tandem axle, Deutz 3 cyl air cooled diesel engine and hydraulic pumps in a removable pad, Price: $55,000
MCT500 MUD MAN MUD SYSTEM (Ref#844R) Manufactured 2007, rebuilt 2 years ago, 3300 gal 2-section tank, mounted on heavy duty trailer, 480 volt/3 phase, diesel generator, 500+ gpm capacity, 5” desilter cone bank, leveling jacks Price (without generator) $115,000 Price with generator: $130,000
MCT-450 DRILL FLUID MIXING AND CLEANING SYSTEM (Ref#3602T) Built 2019, 156 hours, 2400 gal capacptiy two section tank, split equally for clean and dirty volume. High G-force linear shaker, 18 sq ft shale shaker screening area, 18 sq ft desilter screening area, 36 sq ft total screening area with long runway, (6) 5” cones, 450 gpm cleaning capacity. 25hp 178 Series electric centrifugal pump to pressure feed hydrocyclones, 30 hp 178 series electric centrifugal pump to pressure feed hopper, jet guns and supercharge. 480 volt/60kw/3 phase diesel generator, safety shutdowns on engine and generator. High shear/low pressure mixing hopper, sack table, high shear submersed jet guns in both tanks, independent valves to isolate hopper and jet guns, mounted on 12k dual tan axle trailer, pintle hitch, electric brakes, 24’L x 8’4”W x 12’4” H – 20,140 lbs. Price: $172,950
MUD TECHNOLOGY RST-990 MUD MIXING AND CLEANING SYSTEM (Ref#3444T) 1000 gal (approx.) 2-section tank, H G-force linear split shaker, centrifugal pump for mixing and desander, 480 volt/3 phase generator, 320 gpm cleaning capacity Price: $88,500
MUD SYSTEM (Ref#14202RC) with shaker & desander, electric start Price on Request
MUD MIZER 2500 GALLON MUD SYSTEM (Ref#8571T) Deutz diesel engine Price: $26,500
WILCO SUPPORT SYSTEM (Ref#10143Nb) Manufactured 2006, 2500 hours
Gardner Denver mud pump rated at 1.7M/3 min @215 bhp with conventional heads, pulsation chamber, Odrill relief valve, 3.0” mud valve, exhaust fan, mixing hoper, liner wash pump and lubricator, driven by Eaton hydraulic pump with gear reducer and rubber block gear box. Pump house fitted with core bench, storage cabinets, insulated, fluorescent lighting, electric heat, 20 M/3 four compartment mud tank, electronic float levels, Tsunami sump pump, Mission 4x3 pre-charge pumps, Derrick FC-313M liner motion shale shaker with super G agitator. All ancillary equipment hydraulically driven off Funk rubber block four pump adaptor powered by C15 Cat engine rated at 540 HP @ 1800 RPM. Aluminum 1500 liter hydraulic tank. Operators cabin – heated, AC, swivel operators chair, deck/spot lights, full instrumentation, audio/video monitoring system, roof beacon, Retractable stairway. Aluminum fuel tank. Self-leveling deck. Pontoons 6’ X 6’ X 38”, four compartment, aluminum cleats, 5.0” chain.
PRICE: $210,000
PS750 MUD RECYCLER/AIR CONTAINMENT SYSTEM (Ref#2642T) Brand new, never used, 750 gallon tank, 74 hp Tier 4F/Tier 5 European Hatz water cooled diesel engine, 3 x 5 double screen shaker bed, 3 x 4 centrifugal pump, 4 desander cones, with powder coat finish. Price, skid mounted: $97,500 Price, mounted on 2 axle trailer with outrigger jacks: $127,500
2007 MUD TECH MUD SYSTEM (Ref#8728N) down hole pressure pump, shaker, generator, sanding cones Price: $45,000
MUD TECHNOLOGY MC-160 MICRO PORTABLE 1200 GALLON MUD SYSTEM (Ref#5074Ta) 2 compartment, trailer munted, 30 kw diesl generator, south attenuated weatherproof enclosure, single high G-force liner shaker with split screens, high shear submersed turbo jet guns, desilter with 5” hydrocyclone, (3) 2 x 3 centrifugal mud pumps, 110 volt outlets for accessories, hopper with sack table, easy open cleanouts, mounted on tandem axle pintel hitch trailer, currently working Price: $37,500
MUD SHAKER (Ref#4102Rd) mounted on 16’ trailer, Mud Hog transfer pump, 2 cylinder diesel engine, screens, and sand cyclone – needs work
180 BBL WORKING PIT WITH HOUSES (Ref#9529Rc) w/shaker and more, good shape Price: $47,500
HDD MUD MIZER (Ref#4330Nc) Deutz diesel engine, 1000 gallon tank, (2) 2 x 3 pumps with 1 7/8” pump shaft Price: $37,000
500 BBL MUD SHAKER TANK (Ref#4355Ta) 62’L x 11’6”W x 7’H with three partitions, (2) 5 x 6 centfifugal pumps powered by 75 hp electric motors, sandblasted and eopoxy painted 2013
300 BBL MUD SUCTION TANK (Ref#4355Tb) 55’L x 11’6”W x 7’H with three partitions, (2) 5 x 6 centfifugal pumps powered by 75 hp electric motors, sandblasted and eopoxy painted 2013
PRICE FOR BOTH: $39,500
MUD MIXING SYSTEM (Ref#10825Ta) rig tanks and mud systems, pumps and agitators, bag hopper, 10’ wide x 40’ long, POR
NEW USA BUILT 500 GALLON MUD MIXER (Ref#14777T) 3” multiquip mixing pump, gast mixing for gel and kentonite grouts, fork pockets, skid mounted, dual mxing funnels, can mix 500 gallons in 1.5 minutes Price: $15,000
NEW 200 BARREL MUD PIT (Ref#12652Tb) With walkways, handrails, and hydraulic powered shale shaker. Oilfield skid mounted. Price: $50,000
Terms: 40% deposit with order, balance upon completion. Delivery 2 months or less.
MUD SYSTEM (Ref#11973T) Gardner Denver PAH triplex pump, 450 hp Cat engine, 40 kw gen set, 500 gal fuel tank, hight lights, covered operator’s station, approx. 20 bbl mud pit with mixer, shaker, mounted on 2007 Transcarft 100k trailer, very good clean unit Price: $138,500
2002 REVERSE CIRCULATION MUD CLEANING SYSTEM (Ref#8379Ta) 4500 gallons, (2) 4 x 5 scalping shakers, (1) 4 x 5 linear desilting shaker, 5 x 6 centrifugal desilting pump (800 gal per minute capacity), 5” desilting cones, (2) additional tanks available which will provide 20,000 gallon circulation system, semi-mounted with air bag suspension (extra axle comes with unit) Price: $140,000
Also available:
(2) near new 7500 gallon tanks skid mounted that can go with this unit. The extra tanks hook up to the reverse tank to comply with Los Angeles Co 20000 gal requirements for reverse circulation drilling. Price $20,000 each
2002 MUD CLEANING SYSTEM WITH CENTRIFUGAL DESILTING PUMP (Ref#8379Tb) Direct rotary circulation 4500 gallons, (2) linear shakers (600 gal – scalping and desilting), 5 x 6 centriugal desilting pump (800 gal per minute capacity), 5” desilting cones, 5 x 6 Mission Sandmaster pickup pump, all electric with control panels and lighting, mud mixers, semi mounted, 2 available Price: $165,000 each
BROCK DIRECT CIRCULATION CUSTOM MUD CLEANING SYSTEM (Ref#8376Ta) 2000 gallon, (2) deck shaker/scalping and desilter (500 gpm capacity), (2) 3 x 4 centrifugal pumps (500 gpm capacity), 5” desilting cones, electric powered pumps, 75 kw Onan gen set with Tier 3 Cummins engine (low hours), all electric with control panels, mud mixer, Mission Sandmaster electric pickup pump, outriggers, trailer mounted. Low hours on entire unit Price: $140,000
DIRECT ROTARY CIRCULATION MUD CLEANING SYSTEM (Ref#8376Tb) 4500 gallons, (2) linear shakers (600 gallons – scalping and desilitng), 5 x 6 centrifugal desilting pump (800 gallons per minute capacity), 5” desilting cones, 5 x 6 Mission Sandmaster pickup pump, all electric with control panels and lighting, mud mixers, semi-mounted Price: $215,000
TULSA RIG IRON (Ref#14588T) 200 gpm, self contained with generator, (2) 2 x 3 centrifugcal pumps (one for mixing hopper qand the other to run (2) 5” desander cones, 3 panel screen shaker, 2400 gal tank, diesel engine, mounted on two axle trailer Price: $29,500
TULSA RIG IRON MUD SYSTEM (Ref#3344Ta) Revamped to 3500 gallon capacity, rebuilt and not used since, Cummins engine, trailer mounted Price: $92,500
RIG BUDDY MUD SYSTEM (Ref#14586T) 2 panel shaker, Honda 23 hp motor, 2 desander cones, self contained and portable (does not need a pick up pump to function) Price: $32,000
PORTABLE MUD SYSTEM (Ref#8096T) 4 x 4 mud pump, 100 gallon tank, 3 desanding cones, 45kw Cat gen set and power controls, mounted on tandem axle trailer, fully operational Price: $50,000
MUD CLEANING SYSTEM (Ref#10429TA) 1500 gal, shaker/desanders, 5 x 10 piston pump, mounted on 30’ trailer PRICE: $41,500
KEM-TRON SHAKER (Ref#12914Tb) 500 gallon Price: $26,500
SHALE SHAKER-CUSTOM BUILT (Ref#2571Te) 3” sand guzzler, 600 gal tank Price: $23,500