12-nov-24
CABLE TOOL RIGS
CUSTOM AMERICAN BUILT CABLE TOOL RIG (Ref#1961T)
400’, 2 lines, mounted on off-road 3 axle trailer, Tulsa winch, Hollingsworth generator, freshly painted Price: $57,500 - California
CABLE TOOL RIG (Ref#8021T)
No deck engine (removed), mounted on 1968 IHC tandem axle truck with 345 gas engine, Allison automatic transmission, front and rear leveling jacks, tools and assorted bits, 3 sets J wrenches, drilling and fishing jars, bits, reamers up to 36", new drive belt Price as is: $31,500 - Colorado
BUCYRUS ERIE 60L (Ref#9260Rb)
Manufactured 1953, unmounted, 3 line, cathead, gas engine, set up to be pulled with truck, needs clutch work, power unit runs but tired Price: $36,500 – New York
BUCYRUS ERIE 42T (Ref#7510T)
Track mounted drill, 400 hp Cat engine, single line, 450’ depth, 10” – 60” diameter, working condition Price: $89,500
BUCYRUS ERIE 36L CABLE TOOL RIG (Ref#5122T) Older style, trailer mounted, International DT466 diesel deck engine, 3 line machine, 1 string of tools, set of jars, currently working Price: $77,500 - Texas
BUCYRUS ERIE 36L CABLE TOOL RIG (Ref#1967T)
3 lines, 501 Continental gas engine, trailer mounted with 5th wheel, 1000’ of 7/8” American made drill line, 1400’ of ½” sandline, runs good Price: $77,500
Tooling available at extra cost – located Arizona
BUCYRUS ERIE 36L (Ref#6995T) Manufactured 1952, Cummins diesel engine, mounted on single axle trailer Price: $66,000
BUCYRUS ERIE 28L (Ref#6994T) Built 1959, Waukesha 135 diesel engine, mounted on single axle trailer Price: $64,000
Or
Both the 28L and the 36L with the following able tool bits and tools:
(1) 7-1/2" Hubbard
(1) 12-1/2" cross section
(1) 15" cross section
(2) 19" cross section
(1) 22" cross section
(2) 16" cross section
(3) 26" cross section
(1) 50" cross section
Stems, jars and subs
PACKAGE PRICE FOR 28L, 36L, AND TOOLING: $117,500
BUCYRUS ERIE 36L (Ref#7111Tb)
10’ wide 4 axle Crane Carrier, Cummins 855 engine, 3 line machine, 1 string any size included from 3” to 36”, tooling, ready to work Price: $160,000 – Utah
BUCYRUS ERIE 29T (Ref#8467) 353 Detroit deck engine, trailer mounted, motor needs rebuilding, hyd winch split drum Price: $32,500 – Utah
BUCYRUS ERIE 28L (Ref#1570T)
Trailer mounted (5th wheel), 4 cyl Detroit 471 diesel engine, 2500' of 9/16" sandline, 1800' of brand new 7/8 drill line, casing line, 3 line machine Price: $69,500
Tooling available for additional cost. - located Idaho
BUCYRUS ERIE 28L (Ref#7091T)
BUCYRUS ERIE 28L CABLE TOOL RIG (Ref#2792Tc)
52’ derrick, Detroit engine, 1970’ Mack 600 truck with Mack diesel, truck is bad but starts and runs or can be removed Price: $47,500 - Ohio
BUCYRUS ERIE 24L (Ref#9260Rc)
Manufactured 1947, 3 line, Continenetal gas engine (engine needs replacing, hole in block - owner will remove), older rig not used much, unmounted Price: $33,500 – New York
BUCYRUS ERIE 24L (Ref#7003N)
4 cylinder Perkins diesel deck engine, mounted on late 1960's International tandem axle with Red Diamond gas engine, new winch line, 1800' of new 3/4" drill line, 1800' of new 1/2" sandline, 1 front & 2 rear screw jacks, tooled up for 4", new hydraulics, new clutches, tubing power tongs, all gears good condition, currently drilling Price: $48,500 - Ohio
BUCYRUS ERIE 24L (Ref#4644T) 3 lines, needs new deck engine (currently has Continental 6 cylinder Red Seal engine), 6” bit, 20’ drill stem, jars, rope socket, clutches, sitting long time Price: $25,000 - Pennsylvania
ALTEN 24-A (Ref#12489) Similar to 22W
Mechanically perfect, main gear has always been covered, shows little to no wear, main shaft, twin disc clutches, roller main bearing, ball throw out bearings, 52’ derrick with 20 new 20W shocks, pulleys all anti-friction, derrick tips up by hydraulic, elevator to about 25’, 162 in Continental with 4 sp transmission, new 5 v 1 piece power belt, main big pulley has added weight for fly wheel drilling effect, walking beam weighted, mounted on 1983 AM Generator Army truck truck with Cat diesel engine, Allison transmission, 6000 miles on truck, new carb, dist, and valve job, new tires, 10 sp Road Ranger transmission, air brakes, power steering, new tools 30’ overall with button bit and mixing bar, 20’ dart dialer (4” wells), driller’s platform Price: $50,000 - Michigan
BUCYRUS ERIE 22W CABLE TOOL RIG (Ref#9133Ta)
ALTEN CABLE TOOL RIG (Ref#2457T)
Similar to 22W, 3 line machine, mounted on 1999 Freightliner FL60 with Cat 3126 engine, 188,000 miles, new 26’ drill stem, 400’ 5/8” drill line, 4 cyl Continental Red Seal deck engine (freshly rebuilt), 14’ bailer with 400’ sand line, new drill clutch plates, 5”, 6” and 8” bits, fish tool jars, stem retrieval tools, approx. 100’ of 6” casing, drive shoes Price: $44,500 – New York
BUCYRUS ERIE 22W (Ref#8118T)
Ford diesel deck engine, 3 line machine, 40’+mast, mounted on single axle International truck with gas engine, 2 rear mechanical jacks, all new tires, tooled for 4”, drill stem, bailer, running condition Price: $42,500 - Florida
BUCYRUS ERIE 22W (Ref#10819T)
Hercules propane deck engine, mounted on 1989 International 4 x 4 truck with gas engine, no tools, has't run in 10 years, does not start Price: $23,000 - Florida
BUCYRUS ERIE 22W (Ref#1790Nb)
3 line machine, Ford gas deck engine, mounted on 1980 Ford with gas engine, 1 front & 2 rear hydraulic leveling jacks, tooled up for 4" PRICE: $32,500 - Florida
BUCYRUS ERIE 22W (Ref#3001Ta)
42' derrick, John Deere 3 cyl diesel engine on deck, mounted on 1984 Chevy C70 truck with 366 engine, 5 speed 2 speed rear end, 400' of 3/4" drill line. Tooling: 23' stem, 6" bit, 18'5" stem, 8" bit, 12" bit, 15" bit, circle jack, drive blocks, 4 wrenches, 8"-12" drive heads, 4" bailer, 7" bailer, 9" bailer Price: $47,000 - Georgia
Tooling available at extra cost
BUCYRUS ERIE 22W (Ref#10978T) Manufactured 1952, 4 cyl Hercules deck engine, 3 line machine, 40’ mast, mounted on 1993 International single axle truck with DT366 engine, 2 rear screw jacks, well maintained when in service, sitting but was running when parked Price: $32,500 - Illinois
4”, 5” and 6” tools available at extra cost
BUCYRUS ERIE 22W CABLE TOOL DRILL RIG (Ref#7315T) Mounted on 1979 Ford Louisville truck with gas engine, 6 cylinder Hercules gas deck engine, 2 rear manual jacks, fully tooled (3” and larger), sitting since 2019 but running when parked and starts up occasionally Price: $16,500 - Illinois
BUCYRUS ERIE 22W DRILL RIG (Ref#3368T)
3 cylinder Deutz diesel deck engine, 2 part casing hoist, mounted on Ford LN700 single axle truck with 361 CID gas engine, 4”, 5” and 6” strings, drill stems, drilling jars, drill bits up to 12”, various bailer styles, fishing tools, drive blocks, pulling heads, wrenches, well screens, K packers, drive shoes, good working condition Price: $49,500 - Wisconsin
BUCYRUS ERIE 22W (Ref#3884Ta)
Gas deck engine, 2 line (sandline and mainline), spud beam, mounted on 1972 Ford single axle truck with gas engine, 3 hyd jacks, tools for 4”, sitting a long time, needs TLC Price: $11,500 - Wisconsin
Set for jars at additional cost
BUCYRUS ERIE 22W (Ref#3627N) Rig manufactured 1946, 3 line machine, 600’ new 3/8” mainline on rig, 1200’ new never used 3/8” cable on spool, International 4 cylinder gas deck engine (overhauled), mounted on 1969 International single axle truck w/345 gas engine, bailers, subs, etc., 4 rock bits, 30’ mast, 4” – 12” tools, fishing tools, sitting one year, 2 rear manual leveling jacks, sitting for a while, starts up twice a year Price: $35,000 – South Dakota
BUCYRUS ERIE 22W (Ref#10728T)
Manufacturd 1953, Hercules rebuilt engine, 3 line (main, casing, sandline), moutned on 1977 Cherolet C60 with 350 engine, rebuilding with new parts Price: $49,500 - Alabama
BUCYRUS ERIE 22W (Ref#1348Tb) 3 line machine, diesel deck engine, 40' mast, mounted on 1990 GMC truck with gas engine, tools for 6" – 12", 2 front and 2 rear hydraulic leveling jacks Price: $37,500 - Pennsylvania
BUCYRUS ERIE 22W DRILL RIG PACKAGE ( Ref#8182N) Refurbished, new Red Seal Continental gas deck engine, new jack shaft and bearings, mounted on 1998 International with DT466 engine, 3 line machine, 3 bailers, j wrenches, elevators, new bit, new stem, stem guide, currently drilling, fully tooled
Includes trailer with 1000 gpm pump with 4 cyl diesel engine
Package Price: $92,500 - Pennsylvania
BUCYRUS ERIE 22W SERIES I (Ref#3924T)
BUCYRUS ERIE 22W SERIES II CABLE TOOL DRILL RIG (Ref#9146Ta)
Deutz diesel deck engine, mounted on 995 Louisville L8000 with 300 Cummins diesel engine, 1000’ line, string of tools Price: $59,500 – Ohio
BUCYRUS ERIE 22W (Ref#4164T)
35' mast, 2 line machine, 4 cyl Perkins diesel deck engine, mounted on 1988 International truck with 7.3L diesel engine, tsome tools, 2 manual jacks in rear, running condition Price: $42,500 - Oklahoma
BUCYRUS ERIE 22W CABLE TOOL DRILL RIG (Ref#3545T)
4 lines, raising line, casing line, mainline and sandline, Duetz diesel engine on deck, mounted on 1988 S16000 International single axle truck with diesel engine, tooling included: 5” bit, stem, rope socket and stem guide Price: $35,500 - Oklahoma
BUCYRUS ERIE 22W SERIES I CABLE TOOL DRILL RIG (Ref#3284T)
4 cyl Hercules engine, mounted on 2002 GMC truck with Cat 3126 diesel engine, 6 speed transmission, 1200' of drill line and 1200' of sandline Price: $45,000 - Tennessee
BUYCRUS ERIE 22W (Ref#13385T) 3 lines, Continental Red seal on deck, mounted on 1987 Ford F700 4 x 4 truck with gas engine, 1300' plus nof new line, 2 rear hyd outriggers, no tooling Price: $21,500 - Kentucky
BUCYRUS ERIE 22W CABLE TOOL DRILL RIG (Ref#400T)
Built 1946, mounted on 1977 Ford F600, 16,700 actual miles, lots of repairs and upgrades, new fuel pump, new radiator, inside looks new, outside paint faded, good working condition, tools Price: $62,000 – New Mexico
BUCYRUS ERIE 22W CABLE TOOL DRILL RIG (Ref#5067T)
Mounted on 2008 gooseneck trailer, 2011 66HP Tier 4i engine with approx. 1310 hours, California Carb Compliant, 40’ mast height, 2 breakout wrenches, no other tooling, currently working Price: $57,000 - California
BUCYRUS ERIE 22W CABLE TOOL RIG (Ref#6339Tc) 3 line machine, gas deck engine, mounted on 1967 Chevy truck with gas engine, mechanical jacks, fully tooled, currently drilling Price on Request - Idaho
BUCYRUS ERIE 22W (Ref#14255T) Buda gas deck engine, mainline, sandline, mounted on Military 4 x 6 GMC truck, tooling, needs work or parts rig Price: $14,500 - Alaska
BUCYRUS ERIE 22W (Ref#3091RA)
2 line machine, Continental gas deck engine, 30’ mast, mounted on 1952 Army 6 wheel drive truck with gas engine, tooled up for 6”, 1 front & 2 rear hydraulic leveling jacks, sitting 4 years but running when parked Price $17,500 – Ontario, Canada
BUCYRUS ERIE 22W (Ref#2388T) Unmounted, 3 line machine, diesel deck engine, includes tooling, sitting since 2018, running when parked and starts engine Price: $37,500 USD - Canada
BUCYRUS ERIE 20W (Ref#2611R)
Manufactured 1976, Hercules Continental 4 cyl on deck, 3 lines, cathead, mounted on 1979 Ford truck with 390 gas engine, hydraulic jacks, auger attachment, 100' of 8" augers, fully tooled PRICE REDUCED: $36,500 - Wisconsin
BUCYRUS ERIE 20W (Ref#3001Tb)
Ford 4 cyl gas deck engine, 600' sandline, 300' of 5/8" drilling cable, mounted on 1988 Chevy C6500 truck with 366 engine, 5 sp, 2 sp rear end, 20' drill stem, 6" bit, 4-1/4" bailer, set of wrenches, drive blocks, new jack shaft, clutches, top head, bushings and rubbers Price: $37,000 - Georgia
BUCYRUS ERIE 20W (Ref#5601RA)
3 line machine, Ford 172 deck engine, 2 part mast, mounted on 1974 GMC single axle truck with 350 V8 gas engine, drilling bar, 600’ of 5/8” cable, 2 rear mechanical jacks, tooled up for 6”, complete rig, tooling included, sitting a long time (hasn’t started in 10 years) Price: $15,000 – New England USA
BUCYRUS ERIE 20W CABLE TOOL DRILL RIG (Ref#8297T) 2 line machine, ¾” drill line, 4-1/2” drill bar, new 4 cyl Kubota diesel deck engine, jack shaft replaced 2021, 3 hydraulic leveling jacks, good running condition, tooled for 6” holes, includes unmounted 20W for parts Price: $57,500 – New England USA
BUCYRUS ERIE 20W (Ref#10268T)
Perkins diesel deck engine, 3 line machine, standard mast, mounted on 1987 Ford F700 truck (not 4 x 4) with gas engine, truck does not start, mechanical jacks, tooling: (2) stems, (2) bailers, 8” bit, 6” bit, wrenches. Sitting a long time, needs new truck, rig needs new jack shaft, rig needs new cables, needs TLC Price: $12,500 - Pennsylvania
BUCYRUS ERIE 20W CABLE TOOL RIG (Ref#7312T)
3 line machine, 36’ telescoping mast power raised, tool guide, Imperial diesel deck engine LC385, 5/8” drill line (approx 300’), 3/8” sand line (approx 300’), single front hydraulic jacks, rear and middle screw jacks, stem, bailer, J Wrenches, mounted on 1983 Chevy C60 truck 350 CID V8
Tooling:
Bailers with valves: (1) 5-1/2” x 14’, (1) 5-1/2” x 15’ (worn thru pipe wall near valve), (1) 5-1/2” x 6’
Chisel bits (2-1/8” x 3-1/2” taper): (1) 5” x 3’, (1) 6” x 3’, (2) 10” x 3’
Button bits (2-1/8” x 3-1/2” taper): (1) 8”, (2) 5-1/2”, (1) 7-1/2”, (1) 6”, (1) 8-1/2”
Bit gauges: 8”, 6-1/2”, 6-1/4”
Elevators (all steel bales): (6) 1” throat width 1.375”, (7) 2” (throat width 2.5”), (1) 2-1/2” (throat width 2.875”), (1) 5” (throat width 5.375”), (3) 6” (throat width 6.75” – 7”)
Fishing tools: Spring socket, 8’ overshot, 10’ stem centering tools, 7’ cable gripper, 3’ cable gripper, fishing jars, jar bumper
6” casing dead man
Stem stock
Package Price: $25,000 - Pennsylvania
BUCYRUS ERIE 20W CABLE TOOL RIG (Ref#2530T)
BUCYRUS ERIE 20W CABLE TOOL RIG (Ref#1658Tb)
3 line, Cummins diesel deck engine, mounted on 1996 Topkick with diesel engine, 3 leveling jacks, currently working Price: $52,000 – Ohio
Also available: 5-10” bits, chisel bits, button bits, J wrenches, all equipment needed to drill
BUCYRUS ERIE 20W (Ref#15042N) Manufactured 1976, mounted on Chevy C70, Ford 4 cylinder gas industrial engine, 3 line machine, some tooling, top of mast has slight bend and needs to be straightened, been sitting for several years, truck does not start, Price: $13,500 – Ohio
BUCYRUS ERIE 20W CABLE TOOL RIG (Ref#3728T) Diesel engine on deck, 3 lines (new lines), mounted on 1980’s Chevy truck with gas engine, mechanical jacks Price: $35,000 - Kentucky
BUCYRUS ERIE 20W CABLE TOOL RIG (Ref#1072Ta)
Needs work, Hercules gas deck engine, mounted on old Ford Truck Price: $14,500 - Indiana
BUCYRUS ERIE 20W (Ref#6592Ta)
4 cyl Hercules engine, 3 line machine, mounted on 2002 GMC truck with 350 gas engine Price: $25,000 - North Dakota
BUCYRUS ERIE 20W (Ref#13415R)
3 line machine, gas deck engine, mounted on 2000 GMC with Cat diesel engine, tooled up for 4", 4 hydraulic leveling jacks, sitting a few years, truck runs, rig and deck engine needs work PRICE: $18,500 - Michigan
BUCYRUS ERIE CABLE TOOL RIG (Ref#8872Ta)
Needs deck engine, mounted on International truck with gas engine, 2 rear mechanical jacks Price: $18,500 - Michigan
BUCYRUS ERIE 20W (Ref#3812Ra)
Manufactured 1970, Waukesha gas deck engine, 3 line machine, tooled for 4" lines, mounted on 1971 Ford single axle truck with gas engine (hasn't run in 10 years) Price: $19,500 - New Mexico
BUCYRUS ERIE 20W CABLE TOOLS RIG (Ref#3959Tc)
Disassembled, 4 cyl Ford deck engine Price: $8,000 – New Mexico
BUCYRUS ERIE 20W (Ref#15648T)
3 line machine, diesel deck engine, mounted on 1990’s GMC single axle truck with gas engine, 2 rear manual leveing jacks, no tools, sitting over 10 years Price: $13,500 USD - Canada
BUCYRUS ERIE 20W (Ref#3442T)
Mid 1950’s, 3 line machine, 35’ telescoping mast, Kubota diesel deck engine, mounted on 1986 GMC single axle truck with gas engine, tooled for 6”, 1 hyd jack in front, 2 rear screw jacks, sitting 3 year (starts up occasionally) Price: $22,500 USD - Canada
BUCYRUS ERIE 20W (Ref#6757T)
2 line machine, 28' mast, 6 cyl Kubota diesel engine, mounted on 1984 International single axle truck with DT466 engine, 1 front and 2 rear hydraulic jacks, tooled for 5" and 6", sitting outside for five years Price: $30,000 CAD (approx. $22,000 USD) - Canada
BUCYRUS ERIE 20W (Ref#2022Ta)
Built mid 1950's, 3 lines, Red Seal gas deck engine (21 hp), 32' mast, mounted on 987 GMC with gas engine (converted from propane), 1 fronty and 2 rear hydraulic jacks, 2 screw jacks Price on Request - Canada
Tools available 2" - 7"
BUCYRUS ERIE 20W (Ref#14815R)
2 line machine, Allis Chalmers 4 cyl gas deck engine, mounted on late 1980's single axle Ford Louisville with gas engine, telescoping mast, 2 rear screw jacks, tooled up for 6" Price on Request - Canada
BUCYRUS ERIE 20W CABLE TOOL RIG (Ref#3903T)
Trailer mounted, includes drills, jars wrenches. 300 ft cable, located Ecuador Price: $25,000 USD
BUCYRUS ERIE 1W (Ref#6411Tb)
Rebuilt, Perkins deck engine, mounted on heavy duty trailer, back hammer, 2” hammer, brand new hydraulics, working condition Price: $39,500 - Florida
BUCYRUS ERIE 1W (Ref#12427Nb)
Mounted on 1988 Chevy 1 ton truck, 2 lines, gas engine on deck, 2 rear hydraulic leveling jacks, dump bed, 30' mast, tooled for 4", stored inside, sitting 2-3 years Price: $16,000 PRICE REDUCED: $11,500 - Indiana
BUCYRUS ERIE 1W (Ref#4631R)
2 line machine (mainline and sandline), Ford Industrial 4 cyl gas deck engine, hydraulic spudding arm, hyd tilt bed, hyd rear jacks and breakout wrench, mounted on 1975 Chevy C60 truck with 427 V8 engine, (truck does no start) set up as a jetting rig with centrifugal pump (powered by rig engine), 500# weight for driving 4" casing. Truck and rig has not run since 1999. Price: $7,000 - Indiana
BUCYRUS ERIE 1W (Ref#2022Tb)
Built 1950's, run by hydraulic pump, 4 cyl gas deck engine, mounted on Ford F350 truck (rough shape), unmounted, 2 rear screw jacks Price on Request - Canada
Tools available 2" - 7"
WALKER NEER CABLE TOOL RIG (Ref#5884T)
Diesel deck engine, 3 lines, bailer, self contained unit, good tires, no tools Price: $42,500
WALKER NEER 43 CABLE TOOL RIG (Ref#3373Ta) telescoping double pole mast, 471 Detroit diesel, triple drum, 4000’ ½” sandline, 4000’ of ¾” drillpipe, fifth wheel trailer mount Price: $47,500
WALKER NEER 43 (Ref#1397T)
Built 1958, trailer mounted, 3000’ capacity, sitting since 2015 Price: $40,000 - Oklahoma
WALKER NEER C34 (Ref#8263Ta) 7 x 8 Double Poles, Waukesha 145 on deck, mounted on 1978 Mack with Cummins diesel, screw jacks, includes Doghouse and (1) sting of 4" tools, sitting 1 year Price: $65,500 - Kansas
WALKER NEER S33 SPUDDER RIG (Ref#8644Tc)
Price: $42,500 - Michigan
WALKER NEER C32 (Ref#8263Tb) Waukesha 135 on deck, chain driven, 5 x 7 double poles, 3 lines, screw jacks, mounted on 1964 tandem axle International truck with V8 gas engine Price: $34,500 – Kansas
Also available: WALKER NEER C32, 5 x 7 double poles, poles bent, has another 7 x 8 pole to include, no motor on deck, mounted on 1981 Mack truck (truck needs replacing) - Price: $14,500 - Kansas
WALKER NEER C31 (Ref#8263Tc)
Single pole, 3 lines, Waukesha deck engine locked up engine needs replacing or rebuilding, mounted on 1972 Chevy 2-ton truck, screw jacks been sitting for years Price: $25,500 - Kansas
WALKER NEER 31 DOUBLE POLE RIG (Ref#1371T)
Triple drum, casing line, sand line, drill line, 8-10” double poles, mounted on International tandem axle truck with Cat diesel engine, 10 speed transmission, Perkins diesel engine on deck, tools, 7-7/8” carbide bit, 2 smaller bits, bailers, fishing tools, wrenches Price: $31,500 – West Texas
WALKER NEER C33A (Ref#14459T)
4500’ of 7/8” block line, 9/16” sandline drum (no cable), 2000’ of ¾” drilling drum, 3 McKissick sheaves, air clutches and controls, mounted on 1961 Mack truck with 250 hp Cummins engine, older rig but runs good. Includes elevators, oil saver pump, no BJ tongs, currently working. Price: $87,500 - Pennsylvania
WALKER NEER 32 SPECIAL (Ref#1923N)
Manufactured 1953, 140 Waukesha engine, mounted on double axle trailer, 2 lines (drill line, sand line), double pole, friction clutches, some 4-1/2" tools included
Price: $60,000 - Price Reduced: $39,500
WALKER NEER WS-31 (Ref#8606RA)
Diesel deck engine, mounted on Army 6 wheel drive with gas engine, 40' mast, 3 line machine, 4 rear screw jacks, 6" 8" 10" bits Price: $50,000 - New Mexico
WALKER NEER WS-31 (Ref#6352T)
Manufactured 1983, 4 cyl Hercules deck engine, mounted on International Loadstar, 315 International truck engine, rebuilt spudding beam, 44' drill derrick, new bearing in drive clutches, 3 line machine, new 900' main line, new 1200' sandline, 200' utility, (12) drill bits 5" to 16", jars, drill subs, (2) bailers one sand and one dirt, etc Price: $50,000 PRICE REDUCED: $29,500
CYCLONE 46 (Ref#9582T)
6 cyl gas deck engine, sitting over 15 years, needs new cable, includes tools, bailers, bits, stems, set of jaws Price: $32,500 - Pennsylvania
CYCLONE 43R (Ref#9373R) 3 line, 400’ of 5/8” mainline, 30,000# casing line, 400’ 3/8” sandline, mounted on 1953 Studabaker with 300 gas engine, PTO, hyd pump, 42’ mast, 8” bit, 12” bit, 6” bit, sitting since 2012, does not run, needs to be remounted and rebuilt Price: $16,500 - Pennsylvnia
CYCLONE 42 (Ref#8224Ra)
Manufactured 1956, mounted on 1968 Chevy truck, includes stem, bailer, J wrenches, spare bits, needs work Price: $9,500
CYCLONE 40 (Ref#8224Rb)
Manufactured 1961, mounted on 1972 Ford truck, includes stem, bailer, J wrenches, spare bits, working condition Price: $15,000
PACKAGE PRICE FOR BOTH RIGS: $19,500
CYCLONE 42 CABLE TOOL RIG (Ref#5553T) 2 lines, gas engine on deck, mounted on 1987 GMC single axle truck with diesel engine, dual tires in rear, no jacks, tools, stored inside Price: $26,500 - New York
CYCLONE 42 (Ref#5734RB)
Red Seal gas engine, spare engine, sitting a long time, unmounted Price: $6,500 – Wisconsin
SANDERSON CYCLONE 40 DRILL RIG (Ref#1895Ta) Ford Industrial gas deck engine, 2-line machine, mounted on late 1970’s Ford single axle dually trucks with gas engine, 2-wheel drive, 2 rear screw jacks, tooled for 6” and 8”, has been sitting and needs TLC
SANDERSON CYCLONE 42 DRILL RIG (Ref#1895Tb) Red Seal deck engine, 2-line machine, extended mast, mounted on late 1970’s Ford single axle dually trucks with gas engine, 2-wheel drive, 2 rear screw jacks, tooled for 6” and 8”, ready to work, last drilled September 2022
SANDERSON CYCLONE 42 PARTS RIG (Ref#1895Tc)
Price for all three rigs: $48,500 – New York
CYCLONE 36 CABLE TOOL RIG (Ref#78Nb)
3 drum, mounted on 1975 Chevy C60 truck with 350 gas engine, 5 speed, 4 cyl Continental gas engine on deck, 1 piece hydraulic mast, manual jacks, 6” tooling Price: $53,500 - Ohio
SANDERSON CYCLONE 36R COMBINATION ROTARY/SPUDDER RIG (Ref#11403Tb)
4 cylinder Ford diesel engine on deck, 38' hydraulically raised mast, 5-1/2" table retractable to 18" x 12" deep, 3-1/2" x 20' fluted Kelly, drill line drum, sandline drum and casing drum (no line on rig). 2-part block, shock in the crown for cable drilling, Mounted on 1992 Ford L7000 all-wheel drive truck with 6 cyl Ford diesel engine, automatic transmission with big hydraulic pump, low miles, 3 hydraulic leveling jacks, needs new hoses and swivel, no rod box. Price: $32,500 - Oklahoma
CYCLONE 36 CABLE TOOL RIG (Ref#1348Ta) not combination, early 1970’s rig, Ford 4 cylinder Industrial gas deck, mounted on 1977 Ford all wheel drive with gas engine (engine needs work), 3 line machine, 36’ mast, 2 front and 2 rear hydraulic leveling jacks, tools for 5” – 8” Price: $32,500 - Pennsylvania
CYCLONE 35 (Ref#6566T)
Manufactured 1954, 4 cyl International engine, 40’ mast, main line and sandline, walking beam, 500 lb hammer, mounted on 1970 Chevrolet 2-ton with 350 VH engine. It was used as a jetting rig, stored under cover, has not been used since 2003 and will need to be overhauled to move it Price: $19,500 – Minnesota
CYCLONE 35 COMBINATION CABLE/AUGER RIG (Ref#3578T)
CYCLONE 35R COMBINATION MUD ROTARY CABLE TOOL RIG (Ref#10514T)
Built 1966, 5 x 6 mud pump, developmental air compressor, mounted on 1966 Ford F950 Super Duty with gas engine, (2) gas deck engines (one runs rig, one runs air compressor and mud pump), 240’ drill rod, 15’ sub and bit Price: $29,500
CYCLONE 35R COMBINATION RIG (Ref#2400N) 4 cyl Ford gas deck engine, mounted on 1988 Ford F800 single axle truck, rebuilt 5-1/4” retractable table, Bean water injection, 10’ stabilizer, 3 hydraulic leveling jacks, 240’ of 2-7/8” x 20’ Mayhew Jr pipe, currently drilling, will be available Summer 2024 Price: $62,500
pull behind compressor available at extra cost
SANDERSON CYCLONE 35 COMBINATION CABLE TOOL/TOP HEAD ROTARY RIG MODEL R1000 (Ref#8663T)
New PTO, mounted on 1985 International single axle truck with diesel engine, piston compressor, Mission screw mud pump, 300' of pipe, diamond core bits Price: $42,500- Pennsylvania
CYCLONE 36 (Ref#12224) Manufactured 1974, Ford 4 cylinder diesel deck engine, 40' mast, mounted on International truck with gas engine (truck does not run), front and rear hydraulic outriggers, 800 - 1000' depth capacity, sitting for several years, but in good condition when parked Price: $17,500 PRICE REDUCED: $12,500 - Kentucky
CYCLONE 35 CABLE TOOL RIG (Ref#2715Ta) Manufactured 1981, ford Industrial gas deck engine, 3 lines machine, 36' mast, mounted on Ford truck with gas engine, tooled ro 4", 5" and 6" holes Price: $22,500 - New York
CYCLONE 30 (Ref#10230R)
Unmounted, Ford Ind gas engine, 80’+ of ¾” drill line, 90’+ of 3/8” sandline, drive plates, no tooling includede Price: $36,500
IDECO 10 CABLE TOOL RIG (Ref#11833R)
4 cyl Continental gas deck engine, mounted on 1961 International single axle truck with gas engine, 2 line machine, 30' mast, no leveling jacks, 6" & 8" tooling, currently drilling Price: $19,500 - Utah
SPEEDSTAR 282 CABLE TOOLS RIG (Ref#9322T) Built 1945, mounted on 5th wheel trailer, jackshaft rebuilt with only two wells since, updated with Bucyrus Coil springs shock head ad IHC 6 cylinder diesel deck engine, (2) Hobart 4 cylinder 250 amp DC arc welders, all drilling tools including:
(8) bits (12” to 30”)
Drive heads and plates (16” – 30”)
20” ring and slips
Wrenches (4-1/2” and 5-1/2”)
Jacking track
2 sets jars
Stem 2 rope sockets
Combo socket
Drive blocks and bolts
8” x 20’ and 6” x 10’ bailers,
10” and 12” sand pumps
Subs: 5” pin x 4-1/4 box, 3-3/4” pin x 5” box, 3-3/4” pin x 4-1/4 box
Mills Knife perforator: 16” with 18”, 20” and 24” adaptor plates and tool bumper
Price: $72,500
SPEEDSTAR 240 CABLE TOOL RIG (Ref#1246T)
4 cyl John Deere gas engine, electric power up and down derrick, mounted on 1980 Ford F700 truck with V8 engine, automatic transmission, 24,500 GVW, 3 hydraulic jacks, some 4” tools bumping blocks, drivingblocks, J-wrenches, 2 stems, 4” bailer Price: $17,500 – Indiana
SPEEDSTAR 72 (Ref#7893R)
4 cyl gas deck engine, mounted on 3 axle Military truck with gas engine, 3 line machine, all drill stems, fishing tools, bailers, etc, set up for 6" - 12", 3 mechanical jacks available Price: $49,500 - California
SPEEDSTAR 71 (Ref#11502T) Manufactured 1963, gas deck engine, 2 line machine (sandline and approx. 300' cable, mounted on 1968 Ford F700 10 ton with gas engine, ready to work Price: $48,500 - Washington State
SPEEDSTAR 71 CABLE TOOL RIG (Ref#6339Tb)
3 line machine, diesel deck engine, mounted on 1979 Ford 2-wheel drive with gas engine, automatic braces, fully tooled, currently drilling Price on Request - Idaho
SPEEDSTAR 71 CABLE TOOL RIG (Ref#6824T)
Mounted on Ford cabover, Cat 3208 engine, missing jack shaft assembly Price: $17,500 - California
SPEEDSTAR 71 CABLE TOOL DRILL RIG (Ref#3925T)
Continental 122 engine on deck (won’t start), mounted on 1970 International truck with gas engine, new batteries, new belts, 2 rear jacks, 1 stem, 8” bit, 2 jars, 3 bailers, fishing tools Price: $35,000 – Southern California
SPEEDSTAR 71 (Ref#6075N) Manufactured 1985, Perkins diesel deck engine, mounted on Chevy single axle truck with 350 gas engine, 42' telescoping mast, 3/4" cable, 4 mechanical jacks Price: $45,000 PRICE REDUCED: $39,500 - Pennsylvania
SPEEDSTAR 71 CABLE TOOL DRILL RIG (Ref#3039T)
Gas engine on deck, mounted on Chevy single axle truck with gas engine, Chevy truck starts & runs, Tooling includes 3 bits (5-8") one 5" bailer and 3" to 3-1/2" wrenches. 4 jacks Price: $29,500 – Oklahoma
SPEEDSTAR 71 CABLE TOOL DRILL RIG (Ref#2885T)
Diesel engine on deck, mounted on single axle trailer Price: $28,500 - Oklahoma
SPEEDSTAR 71 (Ref#10900Tb)
Mounted on GMC truck, has not run in 25 years, tooling Price: $7,500 - Michigan
SPEEDSTAR 71 (Ref#3091RB) Unmounted, 3 line machine, Continental gas deck engine, 44’ telescoping mast, tooled up for 6”, no leveling jacks, since 2018 years but running when parked Price: $14,500 - Canada
SPEEDSTAR SS-61A (Ref#12486)
48’ derrick, elevator to about 20’, 163 Continental rig engine, 4 speed transmission, 5V power belt, clutches and spudding gear, weighted double pitman walking beam, new shaft and bushing in spudder pulley, 3 hydraulic jacks, single or double line, casing line or extra after market hydraulic winch, mounted on 1963 single axle International V8 gas 4-wheel drive, approx 27000 miles, 4 sp trans., 2 sp rear end, new 9:00 X20 steel belted tires, power brakes PRICE: $50,000 Michigan
SPEEDSTAR 55 (Ref#7544Td)
3 lines, mounted on trailer, no leveling jacks, stored inside Price: $16,500 - Georgia
SPEEDSTAR 55 (Ref#11294T) 4 line machine, 52’ mast with hydraulic rams, International gas deck engine, mounted on 1954 Rio 2-1/2 ton Army truck with 6 cylinder gas engine, 3 hydraulic levelingh jacks Price: $50,000 - Michigan
SPEEDSTAR 55 CABLE TOOL RIG (Ref#5242Tb)
Mounted on 1973 Ford truck with gas engine, cathead, 2 rear jacks, starts and runs Price: $32,500 - Michigan
SPEEDSTAR 55 CABLE TOOL DRILL RIG (Ref#8944Tb)
3 lines, 36’ mast, International 123 gas engine, mounted on 1978 International truck with Cummins diesel engine, 2 rear mechanical leveling jacks Price: $16,500 - Michigan
SPEEDSTAR 55 (Ref#14145R) with swing away auger unit on rig
with swing away auger unit on rig, 2 line machine (3rd can be added), 4 cyl Continental gas deck engine, mounted on 1973 Chevy C35 with 350 gas engine, low mileage, 1 front & 2 rear hydraulic leveling jacks, tooled up for 4” holes, sitting 2 years, includes 3” bit, sand sucker, bailer and 100’ of 4” augers Price: $13,500 – Michigan
CYCLONE 60 CABLE TOOL RIG (Ref#6694T) Gas deck engine, mounted on Chevy truck, some tooling Price: $31,500
CYCLONE 44 CABLE TOOL RIG (Ref#153T)
Hercules propane deck engine, 6” – 14” bits, bails, jars, stems and stem clamps, j wrenches Price: $34,000 - California
SANDERSON CYCLONE 44 CABLE TOOL RIG (Ref#3968Ta) 4 cyl Red Seal gas deck engine, 3 line machine, 40’ mast, mounted on 1987 International with diesel engine, hydraulic brakes Price: $19,500 - Maine
CYCLONE 36A (Ref#2726Ta) with auger attachment, 4 cylinder Continental gas deck engine, mounted on good running military mutifuel 6 x 6 truck, 2 rear hyd jacks, running condition, includes wagon with 5” solid stem augers, Price: $39,500 - Michigan
CYCLONE 35 CABLE TOOL RIG WITH AUGER ATTACHMENT (Ref#383Ta) 3 line machine, Ford 4 cyl gas deck engine, needs new truck, sitting long time, 4” tools Price: $11,500 - Michigan
CYCLONE 35 (Ref#4927Rb) Manufactured 1950’s, mounted on 1994 Chevy 7000 truck with 366 gas engine, 4 cyl International deck engine, 1-1/4” manila rope, 2 line machine, hollow rod for jetting Price: $15,000 - Michigan
SPEEDSTAR 55 CABLE TOOL DRILL RIG (Ref#383Tb) 3 line machine, International gas deck engine, 3” stem, 4” bit, needs new truck, sitting long time Price: $6,000 - Michigan
SPEEDSTAR 55 (Ref#6348T)
3 line machine, 300’ main line, 36’ telescoping mast, Ford gas 172 deck engine, mounted on 1972 Chevy tandem axle truck with Ford L7 engine, sitting 15 years (power swivel removed, but plumbing is there) Price: $16,500 - Michigan
SPEEDSTAR 55 (Ref#2068Tb) 3 line machine, 35' mast, Continental gas on deck, mounted on 1979 GMC truck with gas engine, running condition Price: $32,500 - Missouri
SPEEDSTAR 55 CABLE TOOL RIG (Ref#5062Tc) International deck engine, mounted on Ford F600 (truck needs replacing), sitting 6 years, includes drill stem and bailer Price: $15,500 - Illinois
SPEEDSTAR 55 (Ref#5077N)
Continental gas deck engine, 3 line machine, mounted on GMC (will remove from old truck), like new mainline, sandline & drill line, 3 hydraulic leveling jacks, tooled up for 6” Price unmounted: $17,500 – Oregon
SPEEDSTAR 55 (Ref#5076T)
Waukesha diesel deck engine, 34-35’ mast, 3 line machine, mounted on Volvo with diesel engine, welder, 3 hyd leveling jacks (truck is large enough to carry enough casing the first day’s drilling and has room for all the day to day tools and grout. Price: $30,000 – Oregon
Also available many tools including sand pumps, bailers, jar bumpers, drilling jars, fishing jars, combination sockets with several sizes of fishing jaws, surge block, 3-1/2” wrenches, drive clamps, drill stem, rope sockets, spare Ind Ford 172 engines, perforators 5” – 12” including 8”-10” and 12” 4-way perforators and extra cutters.
LOOMIS CABLE TOOL RIG (Ref#7333T)
3 line machine, Waukesha 4 cyl diesel deck engine, 40' mast, mounted on 1976 GMC 3 ton truck with gas engine, 2 rear manual leveling jacks, lots of tools, sitting but running when parked Price: $17,500 USD - Canada
KEYSTONE 50 CABLE TOOL RIG (Ref#227T)
Unmounted (will be removed from truck), cathead, needs rebuilding Price: $15,000 - Oklahoma
KEYSTONE CABLE TOOL RIG - Bigger than Keystone 50 (Ref#227Tb)
Gas engine, mounted on single axle trailer with 5th wheel, tooled up to 10” Price: $29,500 - Oklahoma
STONE 31 CABLE TOOL RIG (Ref#7321Tb)
Manufactured 1943, mounted on 1985 Ford F600 truck (needs muffler), trucks drives and drill works Price: $22,000
STONE 31 (Ref#5345R)
2 line machine, 4 cylinder Continental gas deck engine, mounted on '59 Chevy single axle truck with gas engine, 2 rear mechanical jacks, tooled up for 6", new stem, new bit, new lines Price: $12,500 - North Carolina
STONE 31 (Ref#1916T)
2 lines, Ford Industrial gas engine, mounted on 1988 Chevy C60 truck with 350 gas engine, tooling included, both truck and rig run Price: $11,500 - Michigan
STONE 31 CABLE TOOL RIG (Ref#1072Tb)
Needs work, Hercules gas deck engine, mounted on Dodge truck Price: $14,500 - Indiana