Last updated: 09/27/2024 9:30 AM
BUCKET RIGS
Spiradrill 44-90
Calweld 200B, 175B, 150
Earthdrill 5200, 90-52, 90-45, 90-42, LH42, 36M
E-Z Bore120-42, 90-52, 90-45, 90-42,
Gus Pech H48, G48, g38, 32, Super George
SPIRADRILL 44-90 BUCKET RIG (Ref#8176T) Manufactured 2002, approx. 16,800 hours, mounted on 2002 Kenworth W900B truck with Cat C15 (475 hp) engine, 205,000 miles, 44” rotary table, 38’ mast with 20” crown block sheaves and guide roller, 4-1/4” = 4” – 8” triple kelly (90’), CH230 main winch 23,000 lbs with spring tensioner, CH 175 auxiliary winch 17,500# with spring tensioner, 6” x 15’L square tubular heavy duty dumping arm with stow cylinder, dual mast cylinders, Cat 3126 diesel deck engine with enclosure, hydraulic crowed (pulldown with 18” stroke), rear mast hydraulic push out (dump), mid outriggers behind cab, dual rear outriggers hydraulic pushout style, 180 gal hydraulic oil reservoir, remote mounted hydraulic heat exchanger with fan, control panel with operator’s seat and protective guard, fenders and side racks Price: $225,000
EZ BORE 120-42 BUCKET RIG (Ref#1888T) Manufactured 1981, 4 piece kelly, extra kelly bar 40', 4" innter, extra innter 4-1/4", total depth 190', 453 Detroit dieck engine with 5 sp Allison transmission, 4 buckets 18-40", mounted on 4 axle 1981 International truck with 671 Detroit engine, used for shallow water and landfill Price: $95,000
EZ BORE 90-45 BUCKET RIG (Ref#13642R) Manufactured 1980, 453 Detroit deck engine, mounted on 1979 GMC with 6V71 Detroit engine, Allison auto transmission, hydraulic pull-out arm, break push-out dump, hydraulic crowds, approx 75' depth capacity, (3) 25' kelly bars, (1) 26" bucket, (1) 16" bucket, 1 front & 2 rear outriggers, good condition, one owner rig, very low hours on drill PRICE: $85,000
EZ BORE 90-42 BUCKET RIG (Ref#7866Tb) Manufactured 1977, Perkins Fase II 6 cyline deck engine, mounted on 1991 Dina 861 with Cummins engine Price: $45,000
EZ BORE 90-42 BUCKET DRILL RIG (Ref#3359Tb) 100’ quad kelly bar, (‘, 7”, 5” and 3-1/2”, U rig gear conversion, hydraulic pull crowd cylinder, Detroit 353 diesel deck engine, Alliston automatic transmission, mounted on 2019 Peterbilt 348 tandem axle heavy haul truck, Pacar 6 cylinder diesel engine, Eaton Fuller 13 speed transmission, PTO, hydraulic riggers, aluminum wheels,, DEF system, 20,000# front axle, 60,0003 GVW Price: $165,000
Available at extra cost:
48” x 48” standard tooth drill bucket
54” x 48” bullet tooth core bucket
60” x 48” bullet tooth core bucket
42” x 48” bullet tooth core bucket
24” x 48” bullet tooth core bucket
EZ BORE BUCKET RIG (Ref#8579T) 90’ kelly, 45” table Price on Request
CALWELD 200B BUCKET RIG (Ref#5260T) Manufactured 1964, mounted on 1977 Peterbilt Price: $53,500
CALWELD 175 DRILL RIG (Ref#11064R) 42" ring gear, 75' kelly bar, American 70B hoist, Chrysler 32 industrial gas deck engine, mounted on crane carrier style truck with CAT 3208 engine, 28" digging bucket, has not drilled in 3 years but in good operating condition when parked PRICE: $25,000
CALWELD 175B (Ref#6954Ta) Ford Industrial deck engine, unmounted, 3-1/2" inner bar, 45" ring gear PRICE: $55,000
CALWELD 150 (Ref#8922R) 36" ring gear, triple scope kelly, (approx. 65' drill depth), Continental 6 cylinder gas engine, mounted on Chevy C60 truck with 6 cyl gas engine, needs new truck, engine needs rebuilding PRICE: $19,500
CALDWELD 150 BUCKET RIG (Ref#11616Ta) unmounted, 72' kelly, 115' depth with extension PRICE: $10,000
CALWELD 150 BUCKET RIG (Ref#13320T) 6 cylinder Chevy deck engine, mounted on 1970 Chevy truck with 366 engine, 60' drill depth, 3 stage Kelly, sitting since 2012, needs tires and brakes, includes 24", 30" and 36" clean out buckets Price: $12,500
Ring gear with transmission available at extra cost
CALWELD 42M H.T. BUCKET RIG (Ref#1004T) Built 1984, drawworks, 7.3 IDI diesel engine, 2 hydraulic winches, 63' Kelly, 42" table, hydraulic hoses replaced 2018, auto hydraulic pull dump arm and rear dump, 2 rear outriggers with hyd extenders and 1 front outrigger, mounted on 1984 International F9370 6 x 6 truck with 400 Cummins engine, no buckets Price: $100,000
CALWELD BUCKET RIG (Ref#9061T) Mounted on Mack truck, 300 engine, 120' depth, 6' diameter, 52" table, ready to work Price: $84,500
GUS PECH SUPER GEORGE H52 (Ref#15248Ra) Rebuilt, mounted on 2000 Sterling tandem axle truck Price: $315,000
GUS PECH H52 BUCKET DRILL RIG (Ref#15251T) Year 2020, 375 hours Price: $420,000
GUS PECH H48 SUPER GEORGE (Ref#15248Rb) Year 1995, has had many modifications to make it a heavy duty rig including new pinion gear on the table drive, factory upgraded to DowMax table motor, new style main winch, Cummins QSB 5.9 diesel deck engine, mounted on 1996 Sterling tandem axle truck Price: $290,000
GUS PECH H48 SUPER GEORGE (Ref#10100R) Manufactured 1994, Cummins deck engine, mounted on 1994 Freightliner PRICE: $170,000
GUS PECH 48 SUPER GEORGE (Ref#707T) 120’ depth, (5) 25’ Kelly bars, Cummins 5.9L 175hp deck engine, mounted on 1984 Ford L8000 truck, Cat 3208 engine, 10 sp transmission, 53,000 miles, double locking differientials, no buckets Price: $140,000
GUS PECH SG-48 (Ref#3454R) Manufactured 1974, freshly rebuilt Ford 391 gas deck engine, mounted on 1975 International tandem axle truck with new diesel engine, 100' telescoping Kelly, hydraulic winch, 18" 24" 36" buckets, 3 hydraulic leveling jacks PRICE: $110,000
GUS PECH H48 SUPER GEORGE BUCKET DRILL RIG (Ref#3367T) 4 kellys, no buckets Price: $90,000
GUS PECH G48 BUCKET RIG (Ref#8498T) Manufactured 1992, mounted on 1992 Mack truck with Mack diesel engine, 4 cylinder Cummins deck engine, 4 hydraulic leveling jacks, includes 10 buckets and tools Price: $90,000
GUS PECH G48 (Ref#13217Ta) Manufactured 1982, mounted on 1998 Mack truck with 427 engine, PTO, power tower, air suspension, 4 leveling jacks, 98’ telescoping mast, 18”, 24”, (2) 36” and 44” buckets Price on Request
GUS PECH SG48 (Ref#225N) Manufactured 1979, John Deere 6068 Turbo, 4 x 25' telescoping Kelly bars with 3-1/2" stub, ¾" non-rotating main winch cable, 5/8" aux winch, mounted on 2000 Sterling, Cummins engine, air suspension Price: $185,000
GUS PECH G-48 (Ref#15327RA) Manufactured 1975, Ford ind gas deck engine, mounted on late 80's-early 90's Mack truck with diesel engine, (2) buckets, (2) augers, well maintained, good condition Make Offer
GUS PECH G48 (Ref#11624T) Manufactured 1971, Ford 6 cyl gas deck engine, mounted on 1990 International with DT466 diesel engine, 100’ telescopic kelly, 48” opening in table, tools, needs some TLC but worked when parked Price: $52,000
GUS PECH BUCKET RIG (Ref#135T) 48" ring gear, no engine, no kelly bar, good for parts only
Price for rig only: $12,500 Price for rig on Paystar 5000 truck: $25,000
GUS PECH 42 (Ref#965R) Manufactured 1976, gas on deck, mounted on 1982 Ford 800 truck with gas engine, 42" turntable, 78' kelly with bucket, 22" bucket, needs new cable PRICE: $15,500
GUS PECH 42 BUCKET RIG (Ref#1459T) Mounted on International truck with Detroit diesel engine, PTO, includes 36” bucket, currently running Price: $80,000
GUS PECH G38 (Ref#2704R) Manufactured 1960's, Ford industrial gas deck engine, mounted on 1979 Chevy C70 10 wheeler with 427 gas engine, 75' depth capacity Price: $40,000
GUS PECH G38 (Ref#13576T) Ford 300 6 cylinder Industrial gas deck engine, 100' depth capacity, mounted on 1972 Dodge tandem axle truck with gas engine Price: $47,500
GUS PECH G38 (Ref#12319T) Ford 300 gas deck engine, needs ring gear, mounted on 1967 International truck with gas engine, 75' depth capacity Price: $28,500
GUS PECH 38 (Ref#14933T) bucket rig, mounted on 5th wheel trailer, Ford ind 4 cyl gas engine, 100' rods, some buckets available, sitting but running when parked Price on Request
GUS PECH BORING RIG (Ref#13676Tb) Manufactured 1990, Cummins deck engine, 75' Kelly, mounted on 1990 International truck with diesel engine, 30" bucket, 18" cleanout bucket Price: $105,000
GUS PECH BORING MACHINE (Ref#1251N) Ford gas deck engine, mounted on 1996 International truck with diesel engine, 4 hyd leveling jacks, new paint, 36" ring gear, 24" bucket and bell, complete, ready to go PRICE: $42,500
WESTERN BORE BUCKET RIG (Ref#9583T), 52" ring gear, 150' drill depth, 453 Detroit diesel deck engine, mounted on Mack truck Price $75,000
BUCKET RIG PACKAGE (Ref#4008R):
- (1) Calweld 150A, 42" ring gear, 1974 Dodge truck, gas/gas
- (1) Earthdrill 36, 3 scope 25' Kelly, 1985 Ford single axle, gas/gas
- (4) 36" buckets, (1) 24" bucket, (1) 18" bucket, (1) 12" bucket, (1) 36" auger
PRICE: $40,000
EARTHDRILL MODEL 32 (Ref#4437T) 30" bucket and extension to 7'5" telescoping Kelly, mounted on 1970 Chevy truck with gas engine, good condition Price: $51,000
BUCKET RIG (Ref#14932Ta) 55” ring gear mounted on 1982 International truck PRICE: $55,000