Last Updated: 11/18/2024 10:23 AM
Speedstar/GEFCO (Franks)
Speedstar/GEFCO (Franks) 200k, 1500, 1000, 1200, SD200, SS-135, SS-40, SS-25, SS-22, SS-15, SS-10, FJ5, FA, WS50
SPEEDSTAR 1500 (Ref#7627N) mounted on 1991 International tandem axle truck with Cummins engine, 9T Fuller transmission, PTO, 400' of 4-1/2" x 20' drill pipe (2-7/8 IF), 22' fluted kelly, 42' mast, (2) Mission 5 x 6 pumps, reverse air capable Price: $80,000
SPEEDSTAR 1500 (Ref#3153T) 500/250 air compressor, no mud pump, rotary table, mounted on Mack truck with diesel engine, PTO, front wheel assist, rod rack, 700’ drill pipe Price: $72,500
SPEEDSTAR 1300 DRILL RIG (Ref#9554T) Manufactured 1970’s, 5-1/2 x 6 Gardner Denver mud pump, no air, 5” retractable table, 25’ fluted kelly, mechanical clutches, pulldown, mounted on Ford 900 tandem axle truck with diesel engine, breakout wrench, pipe rack, 1 front manual leveling jack, 2 rear hydraulic leveling jacks, 300’ of 20’ drillpipe (2-3/8 IF), last ran in 2022 but starts it up occasionally. Price: $47,500
SPEEDSTAR SS1000 DRILL RIG (Ref#3669T) Manufactured 1983, Gardner Denver 5 x 6 mud pump, retractable table, mounted on International 4900 tandem axle truck with 251,000 miles, 4 jacks Price: $70,000
FRANKS 210 DRILLING RIG (Ref#9327T) Built 1961, mounted on 1982 International truck with 466 Industrial, PTO, Gardner Denver 6 x 9 mud pump, Mission centrifugal pump, air compressor, 23’ kelly, large rotary table, 2 winches, 3800’ depth, 300’ of 2-7/8” x 20’ drill pipe, 2 winches, drilling daily Price: $97,500
FRANKS DRILLING RIG (Ref#1434T) similar to GD 1500, mounted on 1984 International 4300 with Cummins engine, 5x6 mud pump, no air, 9" retractable table, 4" fluted kelly, chain pulldown, mechanical clutches, breakout tongs, 1 front & 2 rear hydraulic leveling jacks, 500' of 4" x 20' drill pipe Price on Request
FRANKS 55 (Ref#1849N) 32’ square kelly, 51’ mast for Range III casing, mounted on GMC truck, propane engine on deck and in carrier, 8” retractable table, air clutches Price: $87,500
SPEEDSTAR SS-200 (Ref#11873R) mounted on 1990 Freightliner, (2) 5 x6 GD mud pumps, 8-1/2" retractable table, pulldown, hydraulic leveling jacks Price on Request
SPEEDSTAR 135 (Ref#3612T) Mounted on 1991 international truck with DT466 diesel engine (210 hp), (2) 5 x 6 Gardner Denver mud pumps, 7-1/2" rotary table, chain pulldown, 7 speed transmission, 4 hydraulic leveling jacks Price: $95,000
SPEEDSTAR 135 DRILL RIG (Ref#13479T) mounted on 2000 Ford F750 truck, recently refurbished with new hydraulic pump, hoses and old steel has been replaced. 8-1/2" retractable table, 18" opening when retracted, new pulldown sprocket bearings, 2" swivel, 2-plate 14" clutches 6" x 17" with air cylinder to engage clutches on kelly and hoist side, sandreel manual clutch 4" x 17" single band with 3-plate 11" friction, no mud or air but shafts in place Price: $79,500
300' of 3-1/2" pipe available at extra cost
SPEEDSTAR 135SS DRILLING RIG PACKAGE (Ref#14196T) Manufactured 1969, mounted on 1998 International 4900 truck, 9 speed transmission, tires 90%, PTO, 7-1/2” retractable rotary table, kelly/swivel, 2 rear hydraulic jacks, 5 x 10 Gaso 300 gpm mud pump (gear end 95%)
800’ of 2-3/8 IF drill pipe (pipe less than one year old)
1998 International 4900 water truck with DT466 engine, 9 speed, tires 90%, 2200 gallon
Package Price: $220,000
SPEEDSTAR SS-135 (Ref#2987T) Manufactured 1981, 5 x 6 Gardner Denver mud pump, no air (removed), new kelly 3-1/2" x 24' fluted 2-3/8 IF, 8-1/2" retractable table, hydrostatic, pulldown, mechanical clutches, 4 hyd jacks, breakout tongs, mounted on International truck with new 250 hp Cummins engine, rod box (holds 280'), some bits and subs, 800' of 3-1/2" x 20' (2-3/8 IF) drill rod, spare 5 x 6 pump Price: $170,000
SPEEDSTAR 135-II (Ref#14737T) Manufactured 1979, mounted on 1978 International 2500 truck, needs new truck Price: $47,500
SPEEDSTAR 135 (Ref#3496N) Manufactured 1977, 100S LeRoi compressor (just overhauled), 5 x 6 Gardner Denver mud pump, 2000 Gardner Denver rotary table, 5 speed transmission rotary table (forward and reverse), low and high pulldown, 1" pulldown chains, 23' fluted kelly with kelly bushing, King swivel, mounted on 1973 International twin screw truck, 335 Cummins engine runs rig and truck, 10-20 tires (good shape), transfer case, 5 x 10 Road Ranger transmission, P&O and transfer case, 3 leveling jacks, rod box (holds 400' of 3-1/2" rod), 300' drill rod, 2-7/8 IF fast plug, all new 5/8 cable string on kelly and pickup line twing – 27 lay, Price on Request
SPEEDSTAR SS-135 (Ref#3879TA) 290 cfm air compressor, John Deere deck engine for compressor, 8-1/2" retractable table, hydraulic pulldown, 5 x 6 Gardner Denvermud pump, mechanical clutches, mounted on tandem axle 1997 International 9400 truck with DT466 engine, approx 500' rods, some tools, good condition, ready to go Price: $102,500
SPEEDSTAR SS40 REVERSE CIRCULATION RIG (Ref#8443Tb) Built 2006, Mercedes diesel engine, approx 2500' of 6-5/8" FH pipe Price: 750,000
SPEEDSTAR SS-25SD DRILL RIG (Ref#4405T) Built 1984, Rebuilt 2015, recently installed (2) Tier 4 compliant Perkins diesel engines, 6-part line with 14,500# single line ull (76,000# max), mounted on 3 axle trailer, 7-1/2 x 10 Gardner Denver mud pump, 18" rotary table, double drum drawworks plus sandline, Foster cathead, hydraulic breakout system, 1200' drill pipe, 3 collars, bits, rebuilt mud system Price: $675,000
SPEEDSTAR SS16 Package (Ref#14217R) Manufactured 1977, Speedstar SS22 double drum drawworks, 80,000# mast with mast extension capable of handling Range 2 casing, 7-1/4 x 10" Gardner Denver FXO172 mud pump, 10" Gardner Denver retractable rotary table, mud kelly with bushing, Hydro-matic brake, racking board, work platform, mounted on 8 x 4 Crane Carrier with Cummins N14
Complete with: 3" Little Giant Swivel, standpipe, pipe spinner, tongs, 20' pipe trailer flatbed-5' dovetail and 22,500# tandem axle, extra crown assembly, 82 jts of 4-1/2" x 20' (3-1/2IF) with flats (1600'), 5 jts of misc 20' collars, bit subs and handling tools Price: $275,000
SPEEDSTAR GEFCO SS-15-III DRILLING RIG (Ref#8735T) Manufactured 1989, 3 drum drawworks, (2) 5 x 6 deck mounted mud pumps, 500/200 Sullair compressor (new year 2000), 5” fluted kelly, hydrostatic 8” rotary table, set up for mud drilling and reverse air drilling, pulldown, hydrostatic over-air clutch, mounted on 1988 Peterbilt truck, rebuilt engine in 2017 with approx. 400 hours) Price: $195,000
SPEEDSTAR SS-15 (Ref#6840) Manufactured 1982, 500/250 compressor, plumbed for mud pump with clutch, 10" rotary table, 36' mast, mounted on Crane Carrier with 450 Cummins diesel engine, 600' of 4-1/2" x 15' drill pipe, hammers, stabilizers, handling tools, cable pulldown by hydraulic cylinder, water truck with 1000 gallon tank or C65 Chevy gasoline engine Price: $140,000
SPEEDSTAR SS-15 (Ref#6813N) Manufactured 1980, Mounted on 4 axle Crane Carrier, Cummins 335 engine, 256 Leroi 600/250 air compressor, 8 gpm Myers water injection, 3L4 grout pump, 8-1/2" retractable rotary table, double drum drawworks with 22,000# capacity with 4 lines, 1 sandline, 3 hydraulic leveling jacks, hydraulic cooler, oiler, breakout tong, Gardner Denver FD-FXX 5-1/2" x 10" mud pump, pulldown, located Mexico Price on Request
SPEEDSTAR SS15-III DRILL RIG (Ref#6805T) Manufactured mid 1980’s, 7-1/2 x 8 mud pump, no air, mounted on International truck with diesel engine, PTO, 4 hydraulic leveling jacks, some pipe, rotary table was removed (needs repair or replacement), no rod box Price: $124,500
SPEEDSTAR SS-15 (Ref#630N) Manufactured 1979, mounted on 1991 International truck, Cummins diesel engine, Road Ranger transmission, 40' mast, 23' kelly, 3" swivel, 8" retractable table, 4 leveling jacks, 380' of 4-1/2" x 20' x 2-7/8 IF drill pipe, (2) Mission 4 x 3 x 13 mud pumps, breakout tongs, slips, subs, PTO drive, 50,000# pullback, 6" tricone roller bit, 4" 5" 6" and 8" button bits, 4" hammer Price: $95,000
SPEEDSTAR SS-15 (Ref#15008Tb) Manufactured 1978, mounted on 1978 IHC Paystar 5000, NTC 300 Big Cam engine, 5-1/2 x 8 Gardner Denver mud pump, 256S2 Leroi air compressor, 1500 drawworks, 8-1/2" rotary table, 35' mast with 13' extension with racking board, pipe slide, 4 leveling jacks, Bean injection pump Price: $112,500
SPEEDSTAR SS-15 (Ref#15008Ta) Manufactured 1977, mounted on 1977 IHC Paystar 5000 truck, NTC 400 Big Cam 3, 5-1/2 x 10 Gardner Denver FXD mud pump, GD air compressor, 2000 drawworks, 8-1/2" rotary table, 35' mast with 15' extension with racking board, 3 leveling jacks Price: $124,500
SPEEDSTAR SS-15 (Ref#14222Ta) Gardner Denver 5 x 8 FXX172 mud pump, air compressor, 9" retractable table, 40' mast, pulldown, mounted on 1977 Crane Carrier, Cummins 855 diesel engine, 3 hyd leveling jacks, drill pipe Price: $115,000
SPEEDSTAR SS-15 (Ref#10125T) Manufactured 1977, PTO, mounted on 1977 CCC with 290 Cummins engine, 3x4 centrifugal mud pump, Leroi 500/100 air compressor, 8-1/2" retractable table, 4 ¼" x 23' kelly, breakout wrench, pipe rack, 1 front & 2 rear hydraulic leveling jacks, 300' of 4-1/2" x 20' drill pipe, needs new truck Price: $39,500
SPEEDSTAR SS-15 (Ref#6664R) Manufactured 1973, PTO, mounted on CCC with Cummins engine, Leroi 425/250 air compressor, 4x3 mud pump, 36' mast, 8" retractable table, 4-1/2" x 23' Kelly, water injection, hydraulic pulldown, 3 hydraulic leveling jacks, 15 joints of 4-1/2" x 15' drill pipe, ready to go Price: $75,000
SPEEDSTAR SS15 (Ref#8409R) Manufactured 1972, mounted on Crane Carrier, Leroi 256 air compressor, Gardner Denver 5x6 mud pump, 8-1/2" retractable table, chain pulldown, 2" swivel, 4" fluted kelly, 15 jts of 4-1/2" x 20' drill pipe PRICE: $77,500
SPEEDSTAR SS15 (Ref#10059Nb) Manufactured 1967, 5 x 6 mud pump, Leroi 100 SDS air compressor, 8-1/2” retractable table, mechanical clutches, mounted on 1967 Kline CC 6 x 6, floatation tires Price: $87,500
SPEEDSTAR SS5 (Ref#10627R) Manufactured 1977, Volkswagon gas engine on deck, 3 x 4 Gardner Denver mud pump, mounted on Chevy with Chevy 350 gas engine, 18' kelly, 20' mast, 200-300' 15' rod, (1) 4" and (1) 6" stabilizer, last drilled January 2016 Price on Request
SPEEDSTAR ROTARY RIG (Ref#13228T) includes pipe Price: $90,000
SPEEDSTAR 1000 ((Ref#15051T) POR
FRANKS FJ5 (Ref#6899) Double Drum drawworks (3 lines), 100 SDS compressor, mounted on 6 x 6 Crane Carrier powered by Cummins 270 diesel engine, 3 hydraulic leveling jacks, floatation tires, 5 x 6 Gardner Denver duplex mud pump, 4-1/2" kelly,Giant swivel, 2" pulldown chain, sandline, uses 15' drill pipe, pipe rack, 8-1/2" rotary table, driller's platform, stand pipe in derrick, 2000' machine PRICE: $72,500
FRANKS FA (Ref#9139N) Manufactured 1950's, New 5 x 6 Gardner Denver mud pump, hydraulic pulldown, auto chuck, mounted on 1975 Chevy with gas engine, PTO, freshly painted, needs new hydraulic lines, brake cylinders, 300' of 2-3/8" x 20 N rod, Price: $25,000
FRANKS DRILL RIG (Ref#9532Tb) 5 x 6 mud pump, mounted on International truck with 7.3L diesel engine, 18’ kelly, stationary table, no air compressor Price on Request