Last Updated: 11/19/2024 3:20 PM
Swab Rigs
Pulling Units, Pump Hoists
G & R pump hoists 1200, 500, 400
Hunke/Smeal R30, 12T, 12R, 10T, 8T, 6T, 5T, 4T, 3T
Ideco H37E
Jessen/Monitor pump hoists
Kyle pump hoist 12K
Monitor/Jessen pump hoists
Pulstar P38000, P29000, P20000, P12000, P10000, P7000, P4000
Reichdrill Eagle
Semco S25000, 15000, S8000, S6000
Smeal/Hunke 12T, 12R, 10T, 8T, 6T, 5T, 4T, 3T
Walker Neer pulling units
Cyclone pump hoist/swab rigs
SWAB RIGS
SWAB UNIT (Ref#7326Ta) Approx 25,000’ of 7/32” braided line, mounted on 2006 Freightliner, approx. 325,000 miles, 23,241 miles, 5K psi lubricators, bops and stuffing box Price: $162,500
SWAB UNIT (Ref#7326Tb) Approx 25,000’ of 7/32” braided line, mounted on 2007 Freightliner, approx. 527,000 miles, 23,530 hours, 5K psi lubricators, bops and stuffing box Price: $162,500
FREIGHTLINER SWAB RIG (Ref#9883Tb) Cooper drawworks with new 9/16” sandline, 18,500’ capacity drum, 45’ derrick from hinge, 120 gal brake water tank, depthometer and weight indicator, heat/air in both cabs, air and mechanical brake drawworks in operator’s cab, air controlled line spooler arm, mounted on 2003 Freightliner FL80 truck, 300 hp Mercedes engine, Allison auto transmission, new tires approx. 116,000 miles, 16,710 hours, fully tooled Price: $210,000
FREIGHTLINER SWAB RIG (Ref#9883Tc) Cooper drawworks with new ½” swedge line, 40’ derrick from hinge point approx. 10’ off ground, depthometer and weight indicator and line speed, heat/air in both cabs, air and mechanical brake for drawworks in operator’s cab, 75 gal brake water tank, air controlled spooling arm, mounted on 2007 Freightliner with 450 hp Meredes engine, Allison automatic transmission, new tires, approx. 169,000 miles, 6900 hours, fully tooled with new 2-7/8 BOP Price: $265,000
SWABMASTER SWAB UNIT (Ref#3823Ta) Mounted on 2009 International 7400 SBA 4 x 2 truck, 84,000 miles, 3,698 hours, lubricators, oil savers and mandrils, rig will hold up to 18,000’ of line, ¼” diameter of braided line, 38,000 lbs operating mast when properly guided Price: $137,500
SWABMASTER SWAB UNIT (Ref#3823Tb) Mounted on 2008 International 7400 SBA 4 x 2 truck, lubricators, oil savers and mandrils, rig will hold up to 18,000’ of line, ¼” diameter of braided line, 38,000 lbs operating mast when properly guided Price: $112,500
2007 IHC SWAB UNIT (Ref#4497T) Mounted on 2007 International 7400, 300 hp, Allison automatic transmission, ½” swage line, fully tooled for swabbing, current cvip, maintenance records, ready to work, located Canada Price: $112,500 USD
2007 INTERNATIONAL SWAB RIG (Ref#3429T) Will hold 13,400’ of 9/16” sandline, right angle drive, automatic 6 speed Allison transmission, enclosed operator’s cab with A/C and heat, fully tooled and ready to work Price: $205,000
FALCON SWAB RIG (Ref#7494T) Cummins diesel engine on deck, mounted on Mack truck with Mack diesel engine, holds 11,000’ of cable, walking beam, hydraulic extendible mast, sitting since 2023 Price on Request
2008 STERLING PUMP HOIST/WATER TRUCK (Ref#3571T) 40,000# capacity, 47’ hydraulically raised boom rated at 20,000# static with Braden hydraulic winch, 8000 jib electric winch, mounted on 2008 Sterling LT9500 truck (20,000 kms), p/b Cat C13 diesel engine, 6 speed Allison automatic transmission, PTO, air ride suspension, steel flatbed with 1400 gallon water tank, 3’ X 9”H side rails, hydraulic pipe clamp, hydraulic outriggers, breakout and spinner controls, wireless remote Price: $115,000
SHOP BUILT SWAB RIG (Ref#3370T) 10,000’ – 15,000’ depth capacity, single drum, 10,000’ line (fairly new), mounted on 2002 International tandem axle truck with Cat engine, spare transmission, some tools Price: $37,500
STELLAR 6628 CRANE/PUMP HOIST (Ref#275T) Lifting capacities: 2925 lbs @ 13’, 1350 lbs @ 28’, mounted on single axle 2002 International truck, toolboxes Price: $52,500
PULLING UNIT (Ref#10917Tb) double drum, 40’ mast, mounted on International 4700 tandem axle truck, has pulled 1000’ of 8” casing (filled with water), tooling Price: $55,000
SHOP BUILT CABLE TOOL/SWAB RIG (Ref#10188) triple drum, friction clutch, cathead (sandline holds 2400’ of 5/8” line), mounted on tandem axle Chevy truck with 427 gasoline engine, 8-5/8” x 45’ single pole, new tires, power steering, wireline unit, good usable rig for shallow oil/gas lease, drills, workover, swab capabilities, no tools Price: $112,500 - Oklahoma
1995 KENWORTH T800 SWAB RIG (Ref#2550Ta) Pole rig, Franks drawworks, holds 16000’ of sandline, no cable, no tools, last worked 2021 Price: $47,500
1991 INTERNATIONAL MODEL 8000 SWAB RIG (Ref#2550Tb) Wilson drawworks, 45' scope derrick, no cable, last worked December 2019 Price: $83,500
1992 MACK RD600 SWAB RIG (Ref#2550Tc) Wilson drawworks, 9000' cable, 35' derrick (derrick replaced 2017) Price: $113,500
1994 INTERNATIONAL MODEL 8100 SWAB RIG (Ref#2550Td) Franks drawworks, 9,000’ of 9/16” cable (may need splice job soon) bottom part of spool still in good shape, 35’ derrick, travelling sheave, tooled up, recently put new flywheel on rig and new rear end, currently working Price: $72,500
2002 MACK RD600 SWAB RIG (Ref#2550Tf) Wilson drawworks, Detroit engine on deck, 40’ derrick, no line (can fit 14,000’ of 9/16”, no tools, parked since 2021, back radiator on Detroit needs a little work (has a small hole), hydraulics need fix on the pump (leak), other than that working condition Price: $57,500
1971 INTERNATIONAL MODEL 4370 SWAB RIG (Ref#2550Tg) Franks drawworks, 11,000' of 9/16" cable (will hold 16,000'), 35' derrick Price: $63,500
SLICK LINE UNIT (Ref#2560T) 2006 Ford F550, you can operate it from the inside, last worked 2020, needs new wire, crane needs maintenance Price: $47,500
1999 DODGE SLICK LINE UNIT (Ref#2550Th) 5 speed, Slick line equipment built 2017, tool Price: $72,500
2007 DODGE SLICK LINE UNIT (Ref#2550Tj) Cummins engine, 6 speed, Slick line equipment built 2018, tools Price: $92,500
1979 MACK SWAB RIG (Ref#2970Ta) Needs to be mounted on newer truck Price: $26,500
FRANKS 658 SWAB RIG (Ref#9037Ta) Built 1977, Pemco 45-30 mast 45' clear height x 30,000#, 9/16" swabline, mounted on 3 axle carrier with 6V71 Detroit diesel, Allison 446-2 transmission (has problem, and have new spare), Franks 658 drawworks Price: $147,500
SKYTOP BREWSTER SWAB RIG (Ref#8491T) Mounted on 3 axle Crane Carrier, 45’ mast, drawworks has 9” brakes, Detroit 8V engine (runs very well), hydraulic system functions well, oil saver, swabbing mandril Price: $72,500
SKYTOP SWAB RIG (Ref#9037Tc) Built 1977, Detroit diesel, 54,000 GVW, needs work Price: $50,000
SKYTOP SWAB RIG (Ref#4710Td) Single drum drawworks, 55’ mast, mounted on Kenworth T600 with Detroit 60 Series engine, holds 14,500’ of 9/16” line Price on Request
Also available: Trailer mounted 120-140 bbl fiberglass tank
SWAB RIG (Ref#8055T) Detroit 8V71 engine, 15,000' of 9/16" line, mounted on 3 axle carrier Price: $138,500
TCB WELDING SWAB UNIT (Ref#11549Td) 2014 International truck, single drum, 44' derrick, 20,000# hook load, 8,000# hook load slant Price: $310,000 USD
TCB SWAB RIG MODEL TCB-44-30S (Ref#4118T) Built 2008, 44' working height, mounted on International 7500 truck, 30,000# single line pull derrick, max hook load vertical 30,000#, maximum hook load slant 8,000#, holds 14,000' of 1/2" swedge line, Allison transmission, DT570 engine in truck, includes lubricator, saverhead, and ratigan BOP Price: $195,000 CDN
SWAB RIG (Ref#7353Tb) 28' hydraulically rasied derrick, 9200' of 4/8" stainless sandline, 5 cylinder Mereces diesel engine, mounted on 1986 Chevy C70 single axle truck with 502 gas engine, hydraulic leveling jacks in rear Price: $52,500
SWAB UNIT (Ref#11549Te) 2013 Mack Granite tri-drive truck, 4000 hours, 48' derrick, drawworks drum will hold 14,000' of-1/2" line, fully hydraulic unit, slant capable, DEF System deleted Price: $345,000
SWAB RIG (Ref#4710Tc) Single drum drawworks, 55’ mast, mounted on 1995 Kenworth truck with Cummins 350 engine, 55’ mast, 14,500’ of 9/16” capacity, toolbox, good clean condition Price on Request
Also available: Trailer mounted 120-140 bbl fiberglass tank
MOELLER SWAB UNIT (Ref#9241R) Manufactured 1982, single drum, 42' mast, drum holds 18,000' of 9/16" sandline, Mesa drawworks, V8 Detroit engine, Rigtech carrier, sitting since 2016 PRICE: $42,500
MOELLER SWAB RIG (Ref#7324T) Mounted on 1999 International truck with diesel engine, PTO, Moeller single drum drawworks, 9/16” sandline, sitting since 2020 Price: $62,500
MOELLER SWAB UNIT (Ref#6061Ta) Built 1980, Detroit engine, automatic transmission, runs good, needs line, will hold 15,000' Price: $94,500
MOELLER SWAB RIG (Ref#4710Tb) Moeller single drum drawworks, 55’ mast, 14,500’ of 9/16” line capacity, mounted on 2003 Kenworth T800 truck, approx 100,000 miles, 2 leveling jacks, toolbox, well tooled Price on Request
Also available: Trailer mounted 120-140 bbl fiberglass tank
PUMA WELL SERVICE SWAB RIG (Ref#7442Ta) Manufactured 2004, mounted on 2004 International truck with diesel en gine, 50' derrick, 2000 hrs on engine, located Canada Price: $60,000 USD
Price unmounted (without truck): $40,000 USD
HIGH CALIBER WELDING SWAB RIG (Ref#7442Tb) Manufactured 2004, unmounted, large drum, located Canada Price: $29,500 USD
MESA SWAB RIG (Ref#15642T) mounted on 2001 Mack tandem axle truck with Mack diesel engine, right angle gearbox, 13 speed transmission, Mesa drawworks holds 20,000' of 9/16" sandline, currently has 17,000' on it, hydraulically operated operator's platform, two hydraulic jacks in front and two in rear, ready to work, tires good Price: $144,500
MESA SWAB UNIT (Ref#8271Ta) Ready to work, mounted on 1985 Peterbilt truck with Cummins NCT engine, PTO, single drum, complete with tools Price: $54,500
FRANKS 658 SWAB RIG (Ref#3330Ta) new derrick, mounted on 1986 Peterbilt truck , 350 hp Turbo Cummins Price: $94,500
FRANKS 200 SWAB RIG (Ref#7275T) 53' mast, Detroit 6V71N engine, Allison transmission, 160 sand drum with 15" double roto hydromatic, new 9/16" line, 14,000' sandline (can hold 16,500') Price: $162,500
WILSON SWAB RIG (Ref#3330Tb) mounted on 2001 Freightlinter truck, Detroit Series 50 turbo engine Price: $94,500
WILSON MOGUL 42 SWAB RIG (Ref#6061Tb) Mounted on Ford 8000 truck, Detroit 6 engine, splitter box, will hold 15,000' (now has approx 5000') Price: $94,500
WILSON WORKOVER SWAB RIG (Ref#13398R) Double drum Wilson Sr and Wilson JR drawworks, sandline capacity 10000' of 3/16", mounted on tandem axle, 1987 Freightliner tandem axle truck powered by Detroit diesel engine, 2 hydraulic leveling jacks, Detroit diesel on deck, 50' hydraulically raised mast, brand new hydraulic cylinder just replaced for lifting derrick, has pulled a minimum of 3000' wells, all new hydraulics, PRICE: $147,500
IDECO SWAB RIG (Ref#3330Tc) Mounted on Corevan, 6 speed auto transmission, Detroit 8V92 Price: $189,500
HOPPER SWAB RIG (Ref#3330Te) mounted on 2005 Freightliner with Detroit 60 Series engine Price: $189,500
COOPER SWAB RIG (Ref#4710Ta) Cooper 550 single drum drawworks, 12” brake, 55’ mast, 15,500’ of 9/16” line capacity, mounted on 1996 Kenworth T400 truck with Cummins 350 hp engine, 10 speed transmission, 2 hydraulic leveling jacks, approx 100,000 miles, well tooled Price on Request
Also available: Trailer mounted 120-140 bbl fiberglass tank
COOPER SWAB UNIT (Ref#1464T) Manufactured 1978, rebuilt 2006, mounted on 1999 Freightliner single telescopic mast, max pull on push load 43,000#, weight indicator, dual tandem drive axles, 8000' – 10,000' of 9/16" swab line, Detroit Series 50 diesel engine, Allison auto transmission, 198,000 miles Price: $172,500
COOPER SWAB RIG (Ref#7959Ta) Cooper drawworks, Detroit 6V71 deck engine, 45’ mast, 14,500’ of 9/16” sandline, mounted on 1978 Freightliner truck with Cat 3406 engine, some tools, ready to work Price: $87,500
COOPER SWAB RIG (Ref#3912R) needs rebuilding, Cummins N14 engine on deck, 500 hp right angle drive, sandline, mounted on 1991 Freightliner truck with Cummins engine, holds 16,000' of 9/16" capacity, air over friction, traveling crown sheave, 60' from ground to corwn when erect, hydraulic raising, toolboxes, belly pans and drip guards, 43'L x 8'W x 12'6" H, 70,000 lbs, sitting for many years PRICE: $27,500
WEINS (SIMILAR TO COOPER) SWAB RIG (Ref#3330Td) Newer drawworks, mounted on 2002 Mack truck with Mack Turbo diesel Price: $189,500
CARDWELL H (Ref#986N) double drum workover and cable tool rig, mounted on tandem axle trailer, 1800' sandline with about 4,000' of new line on a spool, new block, doghouse on trailer, 6 cylinder Hercules deck engine propane, 55' pole with 3 settings 42', 48' and 55', (3) 15 ton manual jacks, 20' stem and jars, elevators, bails, boomers, tubing group slip, quick hitch block, (2) breakout tongs, tubing tong, rod wrenches, cable line cutter, 30' bailer Price: $55,000
SWAB RIG (Ref#351N) Mounted on 1993 Peterbilt truck with 22.5 tires and powered by Cummins L14 diesel engine, 4 hyd leveling jacks, 471 Detroit, Automatic transmission, 45' mast, 1600' swab line, weight 46,000#,, tooled PRICE: $95,500
1990 KENWORTH SWAB RIG (Ref#2411Tc) Will hold 16,500' of 9/16" sandline, right angle drive, 8 speed Eaton standard transmission, enclosed operators cab with heat and A/C, tooled, ready to work Price: $140,000
SKID MOUNTED SPOOLER (Ref#4710Te) Franks drawworks, diesel engine Price: $19,500
NEW HYDRAULIC SWAB UNITS (Ref#11777R) 30,000' of ¼" camesa dycam swab line, fully tooled, hydraulic leveling jacks, Roadpower generator, rooftop AC, 51' 35,000 masts or pole mast, Geo-log weight indicator and measuring heads, no truck (you provide truck) Price: $288,000
SWAB UNIT (Ref#11549Ta) 2006 Sterling swab truck, 42 x 10 drawworks, 4200m (13,700') new-1/2" line, 46' derrick, 2 winches, Cat C13 (410 hp) engine, Alliston automatic transmission, approx. 10,000 hours, right angle drive in out of unit Price: $199,000 USD
SWAB UNIT (Ref#11549Tb) 2008 International 7400 Series truck, 14,000# front axle, 40,000# rear axle, 8865 hours, air ride suspension, 47' ground to crown working height derrick, 18,000# single line pull derrick, 12,000' capacity drawworks, air disc brakes, and line spooler, rear operators cab and front walk in toolbox, electronic weight indicator, rear depth meter, air actuated derrick locks, air operated lubricator locks, 2 hydraulic aux winches 2000# pull, 2 tool boxes and working rear floor, emergency shut off front and rear, pre heater, tubing and casing lubricator, tools, new derrick and jack rams, new derrick pins and derrick ears reworked, new drawworks chains and bearings Price: $164,500 USD
SWAB UNIT (Ref#11549Tc) 2010 International 7400 Sereis truck, 14,000# front axle, 40,000# rear axle, 6061hours, air ride suspension, 47' ground to crown working height derrick, 18,000# single line pull derrick, 12,000' capacity drawworks, air disc brakes, and line spooler, rear operators cab and front walk in toolbox, electronic weight indicator, rear depth meter, air actuated derrick locks, air operated lubricator locks, hydraulic auxiliary winch, 2 tool boxes and working rear floor, emergency shut off front and rear, pre heater, tubing and casing lubricators Price: 200,000 USD
SWAB RIG (Ref#9037Tb) Pemco Model 45-30 mast 45' clear height x 30,000#, 9/16" swab line, mounted on 1977 International Transtar 4300 rebuilt engine, 3 axles, 44,300 GVW Price: $162,500
NATIONAL OILWELL VARCO 2500' PULLING UNIT (Ref#4198RB), National Oilwell Varco (DS) drawworks, 40' derrick (45' crown to ground), mounted on 1982 Ford 700 with Detroit V8 diesel engine, 11R22.5 tires (good shape), McKissick pulley, hydraulic leveling jacks front and rear, Price: $52,000
WILSON 2500' PULLING UNIT (Ref#4198RC), Wilson drawworks with disc clutches, 5/8" high strength cable, 40' derrick (42' from crown to ground), 200hp GM diesel deck engine, mounted on 1986 International with V8 diesel engine, 10.00 20 solid tires (rear tires are new), Price: $52,000
CARDWELL 4000’ PULLING UNIT (Ref#7683T) In-line 6 cyl Ford gas deck engine, mounted on Ford 3WD truck with 7.3L diesel engine Price: $67,500
SINGLE POLE PULLING UNIT (Ref#3785T) Mounted on Ford truck, pole rebuilt, needs deck engine Price: $36,500
SHOP BUILT PUMP HOIST (Similar to Smeal 12T) (Ref#2016Na) mounted on 1984 Brigadier truck with 6V71 Detroit engine, PTO Price: $28,500
SHOP BUILT PUMP HOIST (Ref#908T) Can pull up to 30,000#, Pony gas deck engine, 1500’ of 3/8” sandline, 400’ of ½” main line, mounted on 1974 Ford F600 2WD truck with gas engine, no remote, no tools, 2 rear manual jacks Price: $11,500
SHOP BUILT PUMP HOIST (Ref#8776R) mounted on 1992 Ford F600 with gas engine, large utility boxes, 35' mast, 8000# main winch, 1000# sandline set up with 300' of line for bailer, electric winch to load welder into front box, tools for up to 4" drop pipe & all hand tools Price: $40,000
SHOP BUILT PUMP HOIST (Ref#9697T) Mounted on 1989 Ford 1-ton truck with gas engine, remote control, toolboxes, no cathead, no sandline, 2 rear hyd leveling jacks, sitting 3 years POR
SHOP BUILT PUMP HOIST (Similar to Smeal 3T) (Ref#4554T) Mounted on 1989 Ford Superduty 2 WD truck with diesel engine, PTO, 42' mast, no remote, no sandline, no cathead, toolboxes, 2 rear hydraulic leveling jacks Price: $22,000
SHOP BUILT PUMP PULLER (Ref#7381T) electric engine, trailer mounted Price: $6,000
PUMP HOIST (Ref#5242Ta) Mounted on 1983 Chevy truck with gas engine, 2 rear jacks, starts and runs Price: $32,500
WELLMASTER BT-32B PUMP HOIST (Ref#3930T) Mounted on 2024 Dodge Ram 1-ton dually 4 x 4 truck with 6000# BT-32B hoist, new hydraulics and drive motors, Honda drive unit, located Canada Price: $96,000 USD
WELLMASTER BT-32B PUMP HOIST (Ref#1718N) Manufactured 2006, unmounted, 6,000# single line, 12,000# 2-part line, 18,000# 3-part line, 32' telescopic derrick Price: $13,500
G & R 400 PUMP TRUCK (Ref#6504T) Mounted on 1986 International 1900 truck with 6.9L diesel engine, 24 cfm air compressor, walking beam, drive casing with 350# hammer, good for 2 – 4" well development, leak in hoist control valve Price: $22,000
G & R 1200 PUMP HOIST (Ref#11060T) Manufactured 1980, Mounted on 1984 Mack truck, Mack 300 hp diesel engine, new PTO, pump, cable, hyd valves, paint, pins, 5 speed, 167,000 miles, 36' mast, no sandline, no toolboxes, 2 rear jacks, pipe racks PRICE: $35,000
G & R PUMP HOIST (Ref#3059T) Manufactured 1984, mainline, sandline, mounted on 2000 International 4700 truck with DT466e, Eaton 7 speed manual transmission, approx. 415,000 miles (over 12,000 hours) on truck, Price: $48,500
MUSTANG JR PUMP HOIST (Ref#4480T) trailer mounted (can easily be removed and mounted on truck), two winches 12,500 lb and 9,500 lbs, battery operated Price: $24,500
NATIONAL 500C PUMP HOIST (Ref#8353Tb) Built 1998, mounted on 1998 Ford F800 truck, 60,000 miles, 6570 rig hours, (2) toolboxes, Price: $47,500
SWINGER PUMP HOIST (Ref#13253Rb) Manufactured 1989, no sandline, mounted on 1989 GMC 4 x 4 truck with gas engine, toolboxes, no tools, 2 rear jacks, new paint Price: $23,000
SWINGER MODEL 45 PUMP HOIST (Ref#2245T) Mounted on 2009 Ford 750 extended cab, 325 hp Cummins, 31,000 GVW, 2 wheel drive, locking rear end, manual transmission, air brakes, dual winches with 2 speed hydraulic motors, hydraulic wire winder, 4 leveling jacks, multiple toolboxes, 2 heavy duty pipe racks Price: $68,500
SWINGER 45 PUMP HOIST (Ref#7327T) Manufactured 2001, mounted on 2001 Ford F750, manual transmission, low miles, cable remote Price: $60,000
SWINGER PUMP HOIST (Ref#3709T) Built 1990, 3 ton, mounted on 1990 Ford F350 4WD truck, 4 speed with overdrive transmission, new clutch 2018, recently replaced 460 engine (low miles), 28’ extended boom, 4000# winch on main line, 2500# sandline, 4 hydraulic leveling jacks, pulling tools, 6” pipe with caps to carry drop pipe, 5500 Honeywell 220/110 generator wired into outlet on back of truck to test run pumps, starter box in wiring, holders for spools of wire and rope on back, 4” bailer, 2” bailer, well maintained, last worked 2020 but started occasionally Price: $31,500
Also available ¾ ton flat bed with toolboxes
SWINGER PUMP HOIST (Ref#1304T) unmounted Price: $16,500
KYLE 8K PUMP HOIST (Ref#8788T) Manufactured 2008, no sandline, mounted on 2008 Ford F550 4 x 4 truck with 6.4L Powerstroke diesel engine, 135,000 miles, 10' aluminum bed, aluminum toolboxes, remote, crane pedestal, hydraulic jacks Price: $85,000
KYLE 5K PUMP HOIST (Ref#139T) Manufactured 2012, wire winder, hydraulic to rear, mounted on 2012 Dodge Ram 4500 truck, 112,000 miles, open bed, storage Price: $108,000
CUSTOM BUILT WORKOVER RIG (Ref#13714RA) Manufactured 1960, 50 ton capacity, gas deck engine, mounted on 1960 Dodge with 318 ind engine, sitting 2 years Price $21,500
SMEAL 12T (Ref#11072Ta) Manufactured 1991, mounted on 2004 Ford F750 truck with Cat 3126 engine, power to rear, cathead, breakout wrench, oil cooler, sandline, tail out line and main line, 30’ mast, 15’ deck with toolboxes Price: $110,000
SMEAL 12T PUMP HOIST (Ref#3955T) Manufactured 1980, diesel deck engine, sandline, breakout cathead, telescoping mast, no remote, mounted on M9-32A2 5-ton military 6X6 truck with diesel engine, Allison automatic transmission, 2 rear leveling jacks, tooling: 7” bailer, rod slips, tubing slips, rod wrenches Price: $55,000
SMEAL 12T (Ref#5660T) Manufactured early to mid 1990's, bailline, sandline, swivel, blocks, no cathead, mounted on 1989 Ford 8000 tilt cab with 210 Turbo engine, 8000# winch, tools PRICE: $89,500
SMEAL 12T (Ref#878T) Manufactured 1977, mounted on 1977 Ford Price: $52,500
SMEAL 10T PUMP HOIST (Ref#2279Tb) Manufactured 1997, sandline, cathead, mounted on 1997 GMC truck with diesel engine, PTO, 62,857 original miles, manual transmission Price: $62,500
SMEAL 10T PUMP HOIST (Ref#7990T) Manufactured 1983, 3-part line, mainline, sandline, mounted on 2014 Freightliner M2 with Cummins diesel, cathead, power to rear Price: $159,500
SMEAL 10T (Ref#11694T) No sandline, no cathead, has plug in for remote control, but does not have remote, standard mast, mounted on 1997 Peterbilt with Cat C7 engine, new hydraulic hoses, 2 rear leveling jacks, painted PRICE: $52,500
SMEAL 10T (Ref#3173T) Sandline, mounted on 1991 International 5300 truck with DT366 diesel, 70,000 miles, windmill extension, cathead, hydraulic oil cooler, breakout wrench, tailout winch, remote control, 2 rear jacks PRICE: $62,500
SMEAL 10T (Ref#2999N) Rig manufactured 1970's, mounted on 2001 GMC truck with Cat V8 diesel engine, truck needs new fast idle, no air brakes, PTO, bailing drum, sandline, no remote (wired for remote), no cathead, no pipe or tools, all hydraulics gone through February 2014 PRICE: $45,000
SMEAL 10T (Ref#3302T) Manufactured 1975, sandline, mounted on 2001 International truck with DT466 engine, manual 6 speed transmission, hyd brakes, 32,312 miles, all new hydraulics January 2017, new style one body control from Hunke, no remote, updated hydrraulic motors, set up for power tongs, 2 hyd tanks PRICE: $43,500
SMEAL 10T PUMP HOIST (Ref#8867T) Manufactured 1975, mounted on Ford truck, runs good but truck does not meet CA emissions, includes dump truck Price: $60,000
SMEAL 8T (Ref#7937T) Manufactured 1998, mounted on 1998 Ford F800 2WD with diesel engine, PTO, remote control, sandline, cathead, telescoping mast, toolboxes, 2 rear hydraulic leveling jacks Price on Request
SMEAL 8T (Ref#72R) Manufactured 1997, mounted on 1991 International truck, Cummins diesel, sandline and main drum, straight 6 Cummins engine, 10 speed transmission, utiity body, 40' extension mast, no cathead, remote control (needs new cable), 2 rear jacks, 5/8" cable on mainline PRICE: $45,000
SMEAL 8T (Ref#15589R) PTO, mounted on 1994 International single axle truck with DT466 engine (not 4x4), telescoping mast, remote control, sandline, toolboxes, 2 rear hydraulic leveling jacks, located Canada Price $38,500 USD
SMEAL 8T (Ref#7448T) Mounted on 1987 Ford F450 2 wheel drive truck, 7.3L diesel engine, aluminum service body, toolboxes, remote control, sandline, hydraulic walking beam, 2 rear hydraulic jacks, standard mast Price: $47,500
SMEAL 8T (Ref#12405T) Built 1979, sandline, mounted on Ford Louisville truck with diesel engine, no remote, no cathead, toolboxes, 1 front and 2 rear hyd jacks Price: $32,500
SMEAL 6T (Ref#13706Ta) Manufactured 2007, mounted on 2000 Ford F550 truck, 2 wheel drive with diesel engine, low miles, remote control, toolboxes, 2 rear hydraulic jacks, no cathead or sandline POR
SMEAL 6T (Ref#7819T) Manufactured 2005, mounted on 2005 Ford F450 2-wheel drive truck with V10 gas engine, manual transmission, remote control, no sandline, 38' mast, toolboxes, 2 rear leveling jacks, stored inside POR
SMEAL 6T PUMP HOIST (Ref#1543T) Built 2002, mounted on 2002 Ford 4 x 4 truck, 5 speed, 41,000 miles, 7.3L diesel engine, cord remote, new idle control, new cable, set up as single line, can use sandline, 34' mast, new tires, one owner Price: $82,500
SMEAL 6T PUMP HOIST (Ref#997T) Manufactured 2001, mounted on 2011 Dodge 4WD truck with Cummins engine, approx. 160,000 miles, main line, sandline, no remote, poly wheel on back, utility body, 2 rear hydraulic leveling jacks Price: $60,000
SMEAL 6T PUMP HOIST (Ref#7629T) Manufactured 2000, mounted on 1995 Ford F800 truck with 98000 miles, Cummins diesel engine, Alliston automatic transmission, 46’ extended boom, no sandline Price: $55,000
SMEAL 6T PUMP HOIST (Ref#109T) Manufactured 2000, sandline, mounted on Ford F550 (not 4wd), 7.3 diesel engine, standard transmission, approx. 130,000 miles, clean condition Price: $72,500
HUNKE 5T PUMP HOIST (Ref#5246T) Manufactured 2017, mounted on 2017 Ford F450 2WD truck, approx. 142,100 miles, 6.7L diesel engine, control levers outside the cage, dual pipe racks, wireless remote, 2 speed winch, 9’ Dakota utility body with top boxes Price: $92,500
SMEAL 5T PUMP HOIST (Ref#2359T) Manufactured 1983, mounted on 2023 GMC 3500 truck, 6.6L gas engine, 950 miles, hoist completely refurbished, new cable, hoses, front jack, painted Price: $126,000
SMEAL 5T PUMP HOIST (Ref#9613T) Manufactured 2014, 2 line machine, sandline, 20’ mast, mounted on 2014 Ford F550 4x2 with 6.7L Power Stroke V8 diesel engine, 6 speed automatic transmission, 143,832 miles Price: $77,500
HUNKE 5T PUMP HOIST (Ref#9804T) Mounted on 2012 Dodge Ram 4500 2-wheel drive truck, no sandline, 1 line machine, no remote, 2 rear jacks Price on Request
SMEAL 5T PUMP HOIST (Ref#8266Ta) Manufactured 2008, mounted on 2008 Ford F550 4 x 4 truck, 10,000# double winch line, motor gone through recently, 2 leveling jacks, pipe racks, needs winch cable Price: $77,500
SMEAL 5T PUMP HOIST (Ref#7620T) Manufactured 2006, single drum, drum on back for spooling hose and wire, toolboxes, headache racks, mounted on 2003 Ford F550 4 x 4 dually truck with 6 liter diesel engine, new emergency brake, recently overhauled, includes pitless adapter tools Price: $45,500 USD
SMEAL 6T PUMP HOIST (Ref#5537T) Manufactured 2002, Model 6THRPPG, single line, mounted on 2000 Ford F450 4WD truck with 7.2 diesel engine, welder Price: $32,500
SMEAL 5T (Ref#13272T) Mounted on 2006 Ford F550 truck with diesel engine, 155,000 miles, new injector and high pressure pump, 36' mast, mainline, sandline, 2 pipe racks, new tires, service body, storage Price: $47,500
SMEAL 5T HRG PUMP HOIST (Ref#279T) Manufactured 1988, mounted on 2009 Sterling Bullet 5500 4 x 4 truck, 42,300 miles, Cummins diesel engine, 4642 engine hours, aluminum utility bed Price: $59,000
SMEAL 5T PUMP HOIST (Ref#2926Tb) Manufactured 1973, telescoping mast, new cable and hydraulics, mounted on 2009 Chevy 3500 dually, 190,000 miles Price: $48,000
SMEAL 5T PUMP HOIST (Ref#2974T) Built 1971, mounted on 2005 Ford F650 truck, 138,000 miles, truck and rig in working condition Price: $59,500
SMEAL 5T (Ref#13300RA) Manufactured 2005, mounted on Ford F550 4x4 with diesel engine, AC, maximum capacity 12000#, per line 3000#, sandreel, toolboxes, heavy duty trailer hitch, sand reel pump hoist, max capacity 12,000 / per line 3,000 / max lay back 1 line/10 feet, approx 144,000 miles Price: $42,500
SMEAL 5T PUMP HOIST (Ref#8971T) Manufactured 2004, mounted on 2004 Ford F750 truck, approx. 21,000 miles, Cummins 5.9 engine, 7 speed transmission, 33,000# GVWR, no def, air brakes, air to rear, 4 x 2 drive, cathead, remote, no sandline Price: $65,000
SMEAL 5T PUMP HOIST (Ref#9918T) Manufactured 1993, mounted on 1999 Ford F350 4 x 4 truck (245,000 miles), 6.8L V10 gas engine, automatic transmission, new tires, sandline with free fall, pipe racks, RKI service body Price: $67,000
SMEAL 5T (Ref#3430N) Manufactured 1993, mounted on 2002 Ford F450 4 x 4 truck with diesel engine, sandline, cathead, remote Price: $37,500
SMEAL 5T (Ref#6636R) Manufactured 1992, PTO, mounted on 1992 Ford F350 4x4 with diesel engine, remote control, cathead, sandline spool (no line), pipe rack, 2 rear hydraulic leveling jacks Price on request
SMEAL 5T (Ref#935N) Manufactured 2004, mounted on 2000 Sterling truck (not 4 x 4) with Cat engine, remote control, 2 rear hydraulic leveling jacks, toolboxes, pipe racks, no cathead, no sandline, excellent condition Price: $80,000 Tools avalable at extra cost.
SMEAL 5T PUMP HOIST (Ref#909T) Unmounted, remote cable, hydraulic pump and all tools in tool boxes. 440’ of 2” pipe, 360’ of 3” Certa lock pipe, 950’ of 1” air hose, all fittings seen in photos (trailer in photo not included) Price: $31,500
SMEAL 5T PUMP HOIST (Ref#9161T) Manufactured 1982, Unmounted, telescoping mast, remote control (needs rewiring), no cathead, no sandline, 2 pipe racks, 2 rear hyd leveling jacks Price on Request
SMEAL 5T PUMP HOIST (Ref#7563T) Mounted on Ford 4WD truck with blown 6.0 ltr diesel engine, telescoping mast, remote control available but not connected, no sandline, 2 rear hydraulic leveling jacks Price: $17,500
SMEAL 5T (Ref#13258T) Mounted on 2001 Ford F550 4 x 4 truck with new diesel engine, completely gone through and ready to work Price: $47,500
SMEAL 5T PUMP HOIST (Ref#11390T) Manufactured 1976, mounted on 1994 Ford F350 4 x 4 truck, 7.3 diesel engine, 5 sp transmission, newer brakes, 9’ utility body, 170,000 miles, 35,000 miles on rebuilt engine, 2 old style pipe racks, corded remote, front jack and wire winder Price: $42,500
SMEAL 5T PUMP HOIST (Ref#2892T) Manufactured 1994, mounted on 1998 GMC Sierra 4-wheel drive with gas engine, 5 speed, bed rusted, Monroe utility box rusted, remote control, telescoping mast, no cathead, no sandline, toolboxes Price: $29,500
SMEAL 5T PUMP HOIST (Ref#6418T) Mounted on 1992 Ford 2-wheel drive truck, V10 gas engine, PTO, 5 speed transmission, no cathead, no sandline, no remote but hookup is there and he has a block for it POR
SMEAL 5T (Ref#1067Na) Mounted on 1992 Ford F350 4-wheel drive, dual wheels, 8’ flatbed, 460 gas engine, no cathead, 10,000# main winch, remote control, aluminum and steel toolboxes, 2 pipe racks, brand new tires, new fenders, 35’ mast, 100,000 miles Price: $42,500
SMEAL 5T PUMP HOIST (Ref#3018T) Mounted on 1990’s Ford F350 truck 2WD with 7.3L diesel engine, PTO, windmill extension, dual back wheels, no sandline, no cathead, sitting a while, running when parked Price: $20,000
SMEAL 5T (Ref#9374T) Manufactured 1995, mounted on 1995 Ford F450 2-wheel drive truck with diesel engine, service body with toolboxes, 2 rear leveling jacks, remote control, no sandline Price: $29,500
SMEAL 5T PUMP HOIST (Ref#3483T) Manufactured late 1970’s, 36’ derrick, mounted on 1992 Ford 450 2-wheel drive with diesel engine, standard transmission, new tires, toolboxes, no remote (but plumbed for it), no sandline, no cathead, 2 rear hydraulic leveling jacks Price: $42,500
SMEAL 5T PUMP HOIST (Ref#1289T) Manufactured 1987, mounted on 1989 Ford F450 truck with 7.3 Ford diesel engine, manual transmission, 167,710 miles, winch valve needs work and valve leak inside of ram on jacks Price: $27,500
SMEAL BT5 (Ref#13706Tb) Manufactured 1987, mounted on 1997 Ford 450 with diesel engine, 2 wheel drive, 2 rear hyd jacks, no remote, no cathead, no sandline POR
SMEAL 5T PULLING UNIT (Ref#1618T) Manufactured 1987, double drum, 3 toolboxes on each side, mounted on 1987 Chevrolet single axle truck with 350 hp gas engine (truck has been sitting, needs work), rear leveling jacks, no cathead, no sandline Price: $14,500
SMEAL 5T (Ref#7607TA) Manufactured 1986, 35' mast, mounted on Ford F150 2 wheel drive with diesel engine, service body with toolboxes, remote control, sandline, bailer, 2 rear hydraulic leveling jacks Price: $30,000
SMEAL 5T PUMP HOIST (Ref#1258T) Built early 1990’s, single line, 36’ derrick, remote, mounted on 1993 International 4700 truck with diesel engine, 6 speed transmission, toolboxes, rig runs well, brake lines on truck need work (rusted out), needs batteries, has not run since 2015 Price: $25,000
SMEAL 5T PUMP HOIST (Ref#3248T) Manufactured 1980’s, mounted on 1997 Chevy 3500 2-wheel drive truck with diesel engine, service body with toolboxes, telescoping mast, new tires, new batteries, new cable, no remote, good running condition Price: $42,500
SMEAL 5T PUMP HOIST (Ref#5470Tb) Built 1985, mounted on 2000 Ford F450 Super Duty truck with 7.3 diesel engine, cable remote, remanufactured transmission installed in 2016, new diesel injectors installed 2021, truck starts and runs, excellent condition Price: $37,500
SMEAL 5T (ref#4620Ta) Manufactured 1978, mounted on 2000 Ford F550 4 x 2 truck with 7.3L diesel engine, 146,000 miles, 6 speed manual transmission, cathead, hoisting line, sandline, toolboxes Price: $39,500
Available at extra cost:
HYDRAULIC GROUT PUMP (Ref#4620Tb) Armstrong 5 x 6 piston pump, designed to pump 60 gpm, all hydraulic, variable speed, 95 gpm fresh water pump
SMEAL 5T (Ref#15536R) upgraded to pull 8500# single line pull, telescoping mast, mounted on 1986 Chevy C70 2-wheel drive truck with new Chevy 350 engine,new hydraulic pump, new spool valve, new cable, aluminum radiator, remote control, winch line, 1000' of 3/8" sandline, no cathead, 1 front & 2 rear hydraulic leveling jacks Price: $39,500
SMEAL 5T PUMP HOIST (Ref#1202T) Manufactured 1970’s, mounted on 2016 Dodge Ram 4500 (not 4 x 4) with diesel engine, no sandline, toolboxes Price: $57,500
SMEAL 5T (Ref#9156R) sandline, 25' mast, mounted on 1983 Ford F700 truck with diesel engine Price on Request
SMEAL 5T (Ref#15499Ta) Sandline, mainline, walking beam, telescoping mast, mounted on Ford F450 Super Duty (truck needs replacing), 2 rear hydraulic leveling jacks POR
SMEAL 5T (Ref#13194R) Unmounted, sandline, no remote, no cathead, 2 rear hydraulic leveling jacks, toolboxes Price on Request
SMEAL 5T (Ref#6974NB) Manufactured 1978, PTO, mounted on 1983 International with diesel engine, remote control, sandline, 2 rear hydraulic leveling jacks, windmill extension, needs paint and new hoses, sitting a while but running when parked Price: $18,500
SMEAL 5T (Ref#8523T) – two available
SMEAL 5T (Ref#2240T) Manufactured 1977, mounted on GMC truck with 292 gas engine, PTO, mainline, sandline, pipe racks, remote control, ready to go Price: $29,500
SMEAL 5T (Ref#6543R) Manufactured 1970's, mounted on 1988 Ford F350 4 x 4 Super duty XLT, 7.3 diesel engine, 56,500 miles, toolboxes, cathead, 2 rear leveling jacks, 30' mast, no sandline Price: $37,500
SMEAL 5T PUMP HOIST (Ref#2690T) Sandline, no cathead, remote control, 13’ utility body, toolboxes, mounted on 2000 Ford F550 2WD with diesel engine, PTO, 2 rear hydraulic leveling jacks Price: $23,500
SMEAL 5T (Ref#9044Nb) mounted on 1979 International all wheel drive with gas engine, mast with windmill extension, remote control, mainline, sandline, toolboxes, 2 rear hydraulic leveling jacks Price: $22,000
SMEAL 5T (Ref#13911RB) PTO, mounted on Chevy 1 ton, remote control, sandline, toolboxes Price: $19,000
SMEAL 5T (Ref#15439R) mounted on Ford F550 4x4 Price on request
SMEAL 5T PUMP HOIST (Ref#7661Tc) Unmounted, 1980’s hoist, telescoping mast, big winch, no sandline, no cathead, 2 rear hydraulic jacks Price on Request
SMEAL 5T (Ref#13949T) Unmounted, sandline, 30' mast POR
SMEAL 5T (Ref#3403Tb) Manufactured 1982, cathead, sandline, mounted on 1979 International Harvestor truck (truck is no good), rig has not run for 10 years Price: $13,500
SMEAL 5T (Ref#7179Tb) Mounted on Ford F450 Price: $29,500
SMEAL 4T PUMP HOIST (Ref#5844T) Manufactured 1986, mounted on 2011 Ford F550 truck with 6.7 diesel engine, 2WD, 160k miles, automatic transmission, 9’ utility service body, 2 rear hydraulic leveling jacks, plumbed for remote, custom pipe rack Price: $59,500
SMEAL 4T (ref#14087T) 32' mast, mounted on 1999 Chevy 1-ton HD 4 x 4, 454 Chevy engine, no sandline POR
SMEAL 4T PUMP HOIST (Ref#7948T) Mounted on 1995 Ford Super Duty with diesel engine, toolboxes, no remote, 2 rear hydraulic leveling jacks Price: $42,500
SMEAL 4T (Ref#1996Nb) mounted on 1992 Chevy truck with 17' bed, 3116 Cat engine, PTO, remote control, 3 hyd leveling jacks Price: $19,000
SMEAL 4T BT SERIES PUMP HOIST (Ref#445T) 1990 International 4900 Series truck with mechanics body, air brakes, 466 IHC engine Price: $22,500 USD
SMEAL 4T PUMP HOIST (Ref#8425T) Manufactured 1986, no sandline, mounted on 1986 Chevy 3500 Dually with 350 gas, 2 wheel drive, no cathead, has remote, toolboxes, 9' bed, garage kept, 95,000 miles Price on Request
HUNKE 3T (Ref#5062Ta) Manufactured 2017, double/triple line, no sandline, mounted on 2016 GMC 4x4 truck with 6 liter gas engine, manual transfer case, automatic transmission, no oil leaks, 2 rear hydraulic jacks, remote control, 7 toolboxes, 2 pipe racks, 17,000 miles on truck, 1230 hours on rig Price: $72,500
HUNKE 3T PUMP HOIST (Ref#2605T) Manufactured 2016, mounted on 2016 Ford XLT F350 4x4 truck with 6.2L engine, automatic transmission, heavy duty snow plow front springs, 3 leaves added to rear to firm up the ride, 9’ utility body, Rino liner in bed with rubber mat, wire rack for 1000’ spool of wire, pipe rack, hydraulic wire winder, weighted safety hook, stored inside Price: $84,500
SMEAL 3T PUMP HOIST (Ref#2975T) Manufactured 2004, telescoping mast, remote, control, mounted on Ford F450 4-wheel drive with bad engine, hoist is in good shape, no sandline, no cathead, toolboxes, 2 rear hydraulic leveling jacks Price: $37,500
SMEAL 3T PUMP HOIST (Ref#3405Ta) No cathead, no sandline, telescoping mast, mounted on 2005 Ford F250 4-wheel drive truck with gas engine, PTO, 2 rear hydraulic leveling jacks, no remote Price: $32,500
SMEAL 3T PUMP HOIST (Ref#15519) Manufactured 1978, mounted on 1999 Chevy 1-ton 4 x 4 truck with diesel engine, utility bed, remote control, sandline, no cathead, toolboxes, 2 rear hydraulic jacks Price: $32,500
SMEAL 3T (Ref#11725T) standard mast, no sandline, no cathead, mounted on 1999 Ford F250 2wd truck, 5.4L gas engine, PTO, (engine had a 3 valve head, now has a 2 valve head), 8’ utility bed, remote not hooked up Price: $37,500
SMEAL 3T PUMP HOIST (Ref#2597T) Manufactured 1980’s, mounted on 2000 Ford 550 2wd truck with 7.3 diesel engine, PTO, sandline, no cathead, plumbed for remote, toolboxes, 2 rear hydraulic leveling jacks, running condition Price: $37,500
SMEAL 3T (Ref#3910T) Manufactured 1997, no sandline windmill extension, mounted on 1997 Ford F350 single axle 4 x 4 truck with 7.3L Powerstroke diesel engine, no cathead, 153,000 miles Price: $33,500
SMEAL 3T (Ref#7789Ta) Manufactured 1985, sandline, no cathead, 36' mast, mounted on 1987 Ford 1-ton 4x4 truck, 6.7L diesel engine, 5 speed transmission PRICE: $21,500
SMEAL 3T (Ref#7080T) Mounted on mid 1980's Chevy truck, 454 engine, no sandline, hydraulic cathead, 2 leveling jacks, 9' utility bed POR
SMEAL 3T PUMP HOIST (Ref#6763T) Manufactured 1972, mounted on 2006 Ford dually 4WD with diesel engine, 5 speed transmission, remote control, 31’ telescoping mast, 2 rear leveling jacks Price: $32,500
SMEAL 3T (Ref#7520T) Mounted on 1993 GMC dually 4 wheel drive truck with 454 gas engine, remote control does not work (needs repair), sandline, telescoping mast, toolboxes, 2 rear hydraulic leveling jacks Price: $21,500
SMEAL 3T PUMP HOIST (Ref#5857T) Mounted on 1992 Dodge 4-wheel drive truck with diesel engine, PTO, 32’ mast, toolboxes, no sandline, no cathead, no remote, 2 rear hydraulic leveling jacks, good tires Price: $32,500
SMEAL 3T (Ref#6292R) Mounted on 1990 Chevy 2500 truck, 350 gas engine, 65,000 miles, single line, has pullies for 3 lines, hydraulic pulldown Price: $24,000
SMEAL 3T (Ref#2351T) Unmounted, sandline (nop line), no cathead, remote (not wireless) Price: $10,500
SMEAL 3T (Ref#3884Tb) sandline, 40' mast, no cathead, mounted on 1988 Ford 350 with 7.3L diesel (truck engine does not run, needs to be overhauled) Price: $11,500
SMEAL 3T (Ref#9905T) Mounted on 1989 Ford F350 Superduty 4-wheel drive, only 70,000 miles, no sandline (but sandline wheel available), front winch Price: $27,500
SMEAL 3T PUMP HOIST (Ref#3973Ta) Mounted on Dodge truck POR
SMEAL (Ref#11625T) 460 gas engine, no sandline, no cathead, 24' mast, mounted on 1996 Ford F350 1-ton 4 x 4 truck Price: $14,500
SMEAL R2RG PUMP HOIST (Ref#8872Tb) No sandline, no cathead, mounted on older Ford with gas engine, PTO, remote control, utility bed, 2 rear hydraulic leveling jacks Price: $18,000
SMEAL 32B PUMP HOIST (Ref#1559T) Sandline, mounted on two wheel drive 1992 Kodiak with Cat 3116 engine, PTO, low miles and hours on truck, new tires, utility bed, toolboxes, no remote, 2 front and 2 rear hydraulic leveling jacks, running condition Price: $27,500
SMEAL 32BT (Ref#7894Ta) Manufactured 1994, no sandline, no cathead, 32' mast, mounted on 1994 Ford F350 4 x 4 truck, utiity boxes, 47,000 truck miles, located Canada, components were assembled in Canada PRICE: $18,500 USD
PULSTAR P38000HD PUMP HOIST (Ref#10424T) Manufactured 2007, Model P38HDSHX, sandline, ¾” X 210’ winch line, Oil Gear PVG-100 hydraulic pump, mounted on 2006 Peterbilt 357 truck with Cat C11 diesel engine, cross locks 13 speed gear, reduction transmission, heavy duty suspension, 44,033 miles, 15,486 hours (as of January 2024), fully operational Price: $235,000
PULSTAR P38HD PUMP HOIST (Ref#7296T) Manufactured 2006, 44’ mast height, 15,000 lb single line pull, 2 and 3 part line blocks, sandline, breakout wrench, dual catheads, remote control on main line, hydraulic oil cooler, mast light with brush guards, air powered plumbed to rear, mounted on 2017 Peterbilt 337 truck with 10,000 miles, PX9 with Eaton Fuller RTO14908LL transmission, hydraulic power to the rear, 18’ steel flatbed with louvered headache rack Price: $337,500
PULSTAR P38000 PUMP HOIST (Ref#9499T) Manufactured 2005, main line, tail out line, no sandline drum, mounted on Sterling truck with 55,000 miles, 85% tires Price: $187,500
PULSTAR P12 PUMP HOIST (Ref#8266Tb) Model P12SHRPPGXBF Mounted on 2016 Dodge 5500 (approximately 128k miles), mounted in bed Price: $114,500
PULSTAR P10HD (Ref#5975T) Built 2015, mounted on 4 x 4 Dodge 5500 with diesel engine, 46' mast, low hours, 31,000 miles, extras, very clean Price on Request
PULSTAR P10 (Ref#7937T) Mounted on 2001 Ford F450 2WD with diesel engine, remote control, sandline, no cathead, toolboxes, 1 front and 1 rear hydraulic leveling jacks Price on Request
PULSTAR P10000 (Ref#7213T) Windmill extension, mounted on 2005 International truck with rebuilt DT466 engine, 7 speed Spicer transmission, remote control, sandline, toolboxes, 3 rear hydraulic leveling jacks, currently in field working Price: $45,000
PULSTAR P7000 (Ref#2029T) Mounted on 2006 Ford 4-wheel drive truck with new diesel engine and transmission, remote control, no sandline, no cathead, utility bed with toolboxes, 3 hyd leveling jacks Price on Request
PULSTAR P7000 (Ref#3657T) Built 2000, mounted on 2000 Ford F450 4 x 4 truck, 7.3L diesel engine, 235,000 miles Price: $47,500
PULSTAR P7 PUMP HOIST (Ref#9354T) Mounted on 1999 Ford F450 truck 4 wheel drive, 7.3 Power Stroke diesel engine, standard transmission, new clutch 2019, Pac brake exhaust brake, new front drive tires 2019, rear tires 2018, approx 115,000 miles, corded remote Price: $80,000
PULSTAR (Ref#14048T) 2008 Dodge 5700 Price: $64,500
PULSTAR P4000 (Ref#6351T) Manufactured 2005, 32' mast, no sandline, mounted n 2005 Ford F350 1-ton truck Price: $65,000
SEMCO 25000 PULLING UNIT (Ref#12339Ta) Manufactured 2009, mounted on 2009 F750 truck with 6.7 Cummins diesel engine, engine and transmission rebuilt 2017, 2 rear leveling jacks, no sandline Price: $89,500
SEMCO S15000 (Ref#3836T) Buit 2019, mounted on 2020 Freightliner 108SD truck, tooling Price: $260,000
SEMCO S15000 (Ref#11659Tb) Manufactured 2010, no sandline drum, 200’ of ¾” mainline, mounted on 2006 International 4400 truck with DT466 diesel engine, 4 hyd jacks Price: $89,500
SEMCO S15000 (Ref#12339Tc) Manufactured 2009, Standard mast with no extension, 200’ mainline, sandline drum (no line on it), new hydraulic drum motor and brake installed December 2023, mounted on 2002 Sterling tandem axle truck with Detroit Series 60, differential lockers, new tires, cosmetic damage on the hook, cosmetic damage on plastic on the inside on the dash, GVW 52,000 lbs., truck is roadworthy, 4 leveling jacks Price: $89,500
SEMCO S15000 PUMP HOIST (Ref#2573T) Manufactured 2000, mounted on Ford F650 truck with Cat head, approx. 182,000 miles Price: $77,500
SEMCO 15000 WORKOVER RIG (Ref#7711N) Manufactured 2000, PTO, mounted on 1996 Ford F800 (not 4x4) with Cummins engine, power tongs, 1.9" to 2-7/8" air slips, 2-3/8" to 2-7/8" power tongs, water well slips for PVC, pipe wrenches, hand tools, tubing subs 1.9" to 2-3/8", 2" and 4" Balon valves and fittings, used for coal bed methane wells, can pull 2700' of 2-=7/8" tubing single line, excellent condition, fully equipped and ready to work Price: $145,000
SEMCO S12000H PUMP HOIST (Ref#3338T) Manufactured 2021, mounted on 2012 International cab with 500 miles on replaced 220 HP Max Force engine, hot shift PTO, DEF system removed from truck, automatic transmission, 2 speed winch with grooved drum, 2000’ capacity sand reel, 44’ hydraulically telescoping mast, 140’ fpm line speed, lifting capacity 36,000 lbs Price: $115,000
SEMCO S8000 (Ref#8841T) Manufactured 2012, mounted on 2006 Peterbilt 335 truck, Cummins engine, automatic transmission, 24,000# pullback Price: $70,000
SEMCO 8000 (Ref#14214R) Manufactured 1988, PTO, mounted on ‘79 GMC 7500, sandline, with hydrofrac unit 2500psi 45gpm pump, 1"-3" elevators, hand tools, includes '94 Ford LT8000 water truck, 1500 gallon tank, 210 Cummins engine, 6 speed trans, pipe rack, toolbox, 750lb crane Package Price: $67,500
SEMCO 8000 (Ref#7900R) mounted on GMC 2 wheel drive with gas engine, remote control, mainline winch, hydraulic breakout wrench, no cathead or sandline, pipe racks, 2 rear outriggers Price on request
SEMCO S6000 PUMP HOIST (Ref#1667T) Manufactured 2003, no sandline, mounted on 2003 Ford F550 4 x 4 truck with 6.0L diesel engine, wire remote control with throttle, cracked injector in 6.0L diesel engine (needs repair), truck does not start Price as is: $29,500
SEMCO S6000 (Ref#11618T) Manufactured 1988, mounted on 1988 Ford 350 4 x 4 truck, 7.3L diesel engine, 90,000 miles, 1 winch, no cathead, no sandline, 2 rear jacks, stored inside Price on Request
SEMCO S6000 PUMP HOIST (Ref#2926Ta) Manufactured 1986, mounted on 1986 Ford F350 truck, 89,000 miles, new transmission and rear end, telescoping mast Price: $35,000
KYLE HYDROFRACKER WITH SEMCO S6000 CRANE (Ref#6981Ta) Mounted on 1988 International S1600, 5-1/2” packer, 840’ 1-1/2” frack pipe, 80’ zone frack pipe
2003 INTERNATIONAL 9211I WATER TRUCK (Ref#6981Tb) 2700 gallon steel tank, 20’ flatbed with sides, 525,000 miles
Price for both: $95,000
SEMCO 4000 (Ref#4067N) Manufactured 2003, low hours, PTO, mounted on 1994 GMC with diesel engine (not 4x4), (truck not good), bailing drum, pipe rack, 2 rear hydraulic leveling jacks Price: $21,000
SEMCO S4000 (Ref#13300RB) Manufactured 2000, mounted on Ford F450 4x4 with diesel engine, 44' derrick, hydraulic wire reel with free fall, remote control, 8x12 steel flatbed, toolboxes, heavy duty trailer hitch, approx 225,000 miles, sitting since 2019, truck does not start Price: $35,000
MONITOR M42 PUMP HOIST (Ref#9137T) Built 1973, mounted on 2009 Ford F350 truck with V10 gas engine, approx. 197,000 miles, no sandline, ready to work Price: $45,000
MONITOR M35 (Ref#10394Na) 30,000# capacity, sandline, aux line, mounted on International 1600 4-wheel drive truck with gas engine, PTO, Smeal fail-safe brakes on both drums, 130' of new 5/8" line, no tools PRICE: $33,500
MONITOR M35 (Ref#13253Ra) Manufactured 1991, mounted on 1991 International 4 wheel drive truck with DT466 Detroit diesel engine, no tooling, 2 jacks Price: $33,500
MONITOR 35 (Ref#13714RB) needs new lines, oil needs to be replaced, PTO, sandline, mounted on Dodge 1 ½ ton, sitting 7 years Price $16,500
MONITOR 34 (Ref#10043Ra) mounted on 1987 Dodge 1-ton 4 x 4 truck, 360 gas engine in truck, 42' mast, fiberglass service body, plastic pipe reel, 8000# single line, 400' of 3/8" line, 2 rear jacks Price: $10,500
MONITOR M34 (Ref#10093R) Reworked 2005, 42’ mast, single line rating is without double lines. You can run another pulley (extra pulley included) to increase the lifting rating to double, PTO, mounted on 1994 GMC 6500 truckwith Cat diesel engine, Allison transmission, 2hyd jacks, toolboxes, 1 winches Price: $29,500
MONITOR 34 (Ref#4475Tb) Isuzu 4LE1 engine, mounted on 1995 F350 4 x 4 truck Price: $21,500
MONITOR M33 PUMP HOIST (Ref#9739R) mounted on 1992 Ford F350 4 x 2 truck, single line, been sitting idle for 3 years Price: $27,500
MONITOR M33 PUMP HOIST (Ref#9321Tb) Mounted on 1999 Ford F350 2-wheel drive truck, V10 gas engine, auto transmission Price: $26,500
MONITOR M33 (Ref#13491T) 6T hoist completely rebuilt, new hydraulic hoses, pins and bushings. Mounted on 1997 Ford F450 2wd truck 7.3 diesel engine, 11' service body, 123k miles Price: $26,500
MONITOR 33 (Ref#2520Ta) Manufactured 1980's, mounted on 1990 GMC Topkick with gas engine, 2 wheel drive, no remote, no sandline or cathead, 2 rear hyd leveling jacks Price $27,500
MONITOR M-33 (Ref#11730R) unmounted, manufactured 1972, hydraulic pump, no cathead, no sandline, no remote control Price: $10,500
MONITOR M34 (Ref#10394Nb) 8,000# single line capacity, mast with 2' extension (37' total height), 130' of new 5/8" line, mounted on International 1600 4-wheel drive with gas engine, no tools Price: $37,500
MONITOR M33 (Ref#3693N) Telescopic 33' mast with remote, mounted on 2000 Ford F250, located Canada PRICE: $30,000 CDN
MONITOR M33 (Ref#1996Na) Manufactured 1977, unmounted, telescoping derrick, remote available, no sandline, 2 rear hyd leveling jacks, no tools Price on Request
MONITOR 33 (Ref#15678) 33' telescoping derrick, remote control, custom designed two rear hydraulic stabilizing jacks, 8' steel deck, hydraulic driven pump pulling drum, two upright cabinets, two under deck boxes and two under deck fuel tanks, mounted on 2002 F550 Ford truck with 7.3 power stroke with 6-speed manual transmission Price: $75,000
MONITOR 33 (ref#2057N) mounted on 1988 Ford 2-ton truck with rebuit Jasper 370 hp gas engine, air brakes, 5 & 2 transmission, PTO, 1 winch, 2 rear hyd leveling jacks Price: $17,500
MONITOR PUMP HOIST (Ref#9133Tb) Unmounted, no line, no engine, not used since 2015 Price on Request
MONITOR PULLING UNIT (Ref#2281N) mounted on 1988 Chevy 4 wheel drive truck with 350 Chevy engine, 6,000-8,000# hoist Price: $22,500
MONITOR 32B PUMP HOIST (Ref#8321T) 3 speed transmission on winch, mounted on 2000 Chevrolet truck with 454 engine, manual transmission, 11' utility body, 35' mast, extended boom with 3rd leg provision, ready to work, single line machine, will accommodate 2 line block, pipe rack Price on Request
MONITOR PUMP HOIST (Ref#4329T) Unmounted, single line, can pull 25’ without extending the mast, telescoping mast, remote control, no cathead, no sandline, 2 rear hydraulic jacks Price on Request
MONITOR PUMP HOIST (Ref#4836Ta) unmounted Price on Request
JESSEN M-33 PUMP HOIST (Ref#2591R) Manufactured 1979, PTO, mounted on Ford F-600 2 wheel drive with propane engine, 1 winch, 30’+ mast, no sandline or cathead, 2 rear leveling jacks, utility boxes, ready to go. Second rig available: same specs as above, manufactured 1977, sitting a long time, needs work Price: $19,500 for both
JESSEN PUMP HOIST (Ref#1477T) Single line, mounted on 1-ton Ford truck with diesel engine, utility body, 2 rear hydraulic leveling jacks Price: $16,500
PUMP HOIST (Ref#2162T) Approx 6000# capacity, mounted on 1990 Chevy 3500, gas, 2 WD, 1996 Bloom winch Price: $19,500
FLEETMASTER 2 TON PUMP HOIST (Ref#158N) 1974, mounted on 1989 International truck, diesel DT360 International engine, spudder attachment, 32' derrick, excellent condition PRICE: $29,500
FLEETMASTER PUMP HOIST (Ref#309Tb) Manufactured 1999, mounted on Ford F550 Super Duty 4-wheel drive truck with diesel engine, no cathead, 1 winch, telescoping derrick, 2 rear hyd leveling jacks Price: $25,000
CYCLONE PUMP HOIST/SWAB RIG (Ref#10544N) Manufactured 1978, Capacity of 4,000#, split single drum, mounted on Ford F350 single axle dual wheel rear with 4 speed transmission, gasoline engine, tool boxes, 2 hydraulic leveling jacks, 5 speed transmission on hydraulic drawworks, 30 gallon hydraulic tank, twin disc air clutch, 2 piece square tubular boom retractable to length of truck expands hydraulically to 30', 400' of 1/4" cable, boom will tilt back to 12' behind truck to swab a well or pull a pump PRICE: $17,500
CYCLONE 30 PUMP HOIST (Ref#5688T) mounted on 1987 Chevy 1 ton truck, 350 cu in 4 bolt main, currently working Price: $14,000
CYCLONE PUMP HOIST (Ref#13788) Manufactured 1981, 125 SDS Grimmerschmidt compressor, single drum, 1 front 2 rear hydraulic leveling jacks, 12,000# capacity, pipe rack, 75' of 5/8" cable, toolboxes Price on Request
CYCLONE PUMP HOIST (Ref#466N) mounted on 1993 Ford F450 truck, fiberglass utility boxes, PRICE ON REQUEST
CYCLONE PUMP HOIST (Ref#8908T) single line, now on a wheeled carrier, PTO, has a transmission, will sell unmounted Price on Request
CYCLONE F100 PUMP HOIST (Ref#15368T) Manufactured 1992, rated for approx 5,000 – 6,000 lbs, mounted on 2006 Chevrolet Kodiak 5500 4 x 2 flat bed Price: $39,500
CYCLONE F100 PULLING UNIT (Ref#10013) Manufactured 1990, mounted on Ford F350 single axle rear truck powered by 460 gaoline engine, 5 speed manual transmission, utility body, 10,000# capacity, aux sandline, remote control, hyd jacks in rear Price: $28,500
CYCLONE F40 PUMP HOIST (Ref#8537T) mounted on 1973 Chevy ¾ ton 4 x 4 truck, 350 Chevy engine, no sandline, no cathead, 30' mast, approx 52,500 miles Price: $17,500
CYCLONE F40 PUMP HOIST (Ref#3139T) no sandline, cathead, mounted on 1986 GMC truck with gas engne, running condition PRICE ON REQUEST
CYCLONE F30 PUMP HOIST (Ref#4785N) early 1970's, mounted on 1987 Ford F800 2wd truck, Ford diesel engine, single line machine, no sandline, truck bed equipped with toolboxes, pipe rack, no tools Price: $17,000
CYCLONE 10 PUMP HOIST (Ref#491N) mounted on 1984 Railroad truck, power brakes, new battery, 500' of new pipe, 32'+ derrick, 10" bit, stems, sockts.
1975 Chevy flatbed truck with Chevy gas engine, 14' ved, 250 gallon tank, steel racks Package Price: $20,000
CYCLONE 5 PUMP HOIST (Ref#5242Tc) Mounted on 1979 Chevy truck with gas engine, 2 rear jacks, starts and runs, gone through 2022 Price: $32,500
WALKER NEER 32 SPECIAL (Ref#1923N) Manufactured 1953, 2500' drill line, 3000' sandline, 140 Waukeshaw engine, mounted on double axle trailer, 2 lines (drill line, sand line), double pole, friction clutches, fully tooled PRICE: $45,000
PRINCE MANUFACTURED PUMP HOIST (Ref#1025T) mounted on 1996 GMC 3500 2 wheel drive truck, diesel engine, 2500 psi – 3 bore, 15' mast, 2 leveling jacks, no remote PRICE: $12,500
HOPPER BAILER RIG (Ref#4042Ne) sitting long time but running when parked, includes 15 bailers and bucket Price: $18,500
2002 CHEVY SERVICE TRUCK WITH 2500# CRANE (Ref#5511T) IMT Service body, 2002 Chevy 3500HD, 2500# single line crane, used to pull pumps Price on Request