Last Updated: 10/10/2024 5:08 PM
Ideco
Ideco H3000, 1000hp, 725, H44C
IDECO 1000HP DRILLING RIG (Ref#11167N) Single drum drawworks, 1-1/8" drilling line, hydramatic brake, 2 engine compound (2) Detroit Series 60 diesel engine 550 hp each (drives rig and carrier), 112' x 378,000# mast, 8 lines, 16' substructure, mounted on 6 axle carrier, (2) 6061 Allison transmission, No additional equipment Price: $825,000
IDECO 1000 HP DRILLING RIG (Ref#9965Tb) Manufactured 2004, 117’ SHL telescoping mast, mounted on 3 axle, 358,000# static hook load, 5-sheave travel block, racking board, mounted on 3 axle trailer, optional 250 ton top drive/power swivel Price as is: $700,000 Price reworked cleaned, painted and certified: $1,300,000
IDECO 725 TRAILER MOUNTED DRILLING AND WORKOVER RIG (Ref#2008N)
SMST-M900 SERIES 116' x 420,000# mast, manufactured 2008, overall height 120', max hookload 360,000 lbs on 8 lines, 420,000 lbs on 10 lines, rated hookload 400,000 lbs. 10 lines, crown block 412,000 lbs rated capacity, 484,000 lbs max capacity. Racking capacity 5" DP with 6-1/2" DC 8000', 3-1/2" DP with 4-3/4" DC 11,500', stabbing board, 9.8' height adjustment, escape seat.
SMST 20' M Partin 900 Substructure, manufactured 2008. 14'H x 18.04' W x 10.58' height under rotary beams, 290,000 lbs setback load, 330,000 lbs rotary load, 620,000 lbs max load (setback and rotary load), BOP handling system (trolley on two rails), 40,000 lbs static load
IDECO 725M DRAWWORKS manufactured 2006, mechanical drive, 750hp – 900 hp input rating, 44,500 lbs max single line pull (2nd oayer), Parkersburg auxiliary brake Parmac V80, (2) Cat D3412 (475 hp)
1-1/8" diameter drilling line, sandline, Ideco dead line anchor
Ideco TL-200 swivel 396,000 lb load capacity 6000 psi rated pressure
Auxiliary winches, Oilwell C-20.5 rotary table
Located Europe
Price €1,100,000 (Euros)
IDECO H44 DRILL RIG (Ref#3977T) 1000 hp trailer mounted drill rig, (2) Detroit 60 Series engines 475 hp each @ 1800 rpm, 117’ x 450,000# derrick, 17’ adjustable substructure, Century 17-1/2” x 44” rotary tble, National 160 ton Shorty block, V door catwalk, water tank/doghouse combo Price: $275,000
IDECO H44 DRILL RIG (Ref#3981T) Drive in, rated to 6500’ with 4-1/2” drill pipe, (2) Detroit 871 engines (305 hp each), Ideco 108’ x 268,000# mast, 12’ H telescoping substructure, Dreco 150 ton block, ZP 17-1/2” x 44” rotary table, V-door catwalk, water tank/doghouse combo Price: $215,000
IDECO H44-CSD RAMBLER AND IDECO H37 BACK IN RAMBLER DRILLING RIG PACKAGE (Ref#13044R)
Includes:
700 HP IDECO H44-CSD RAMBLER DRILLING RIG Manufactured 1983, Model #DIR706SBS, mounted on a 6 axle carrier w/ H-44 CSC drawworks, Parkersburg 22 in. hydromatic brake,
(2) 3406 Cat motors w/Allison torque converters & Allison 6 speed transmissions, 113 ft. x 278,000# Ideco derrick, Cabot 13 ft scissor type substructure 350,000# rating, 17-1/2 in rotary table
IDECO H37 BACK IN RAMBLER DRILLING RIG Mounted on a 5 axle carrier, powered by a 550 h.p. Detroit 12V 71 motor. Equipped with Parkersburg hydramatic brake, derrick is removed and not avaialble, telescoping substructure (telescopes from 9' – 12'), Oilwell 17-1/2" rotary table, rig can rack 7000' of 4-1/2" drill pipe and (24) 6" collars, Martin Decker weight indicator, hydraulic hoist with 5/8" line mounted on rig
Mud Systems:
(2) Gardner Denver FXN pumps with gauges, mud valves, pulsation dampener, powered by 350 h.p. Cummins big cam motors, (1) 500 bbl, two-pit mud system with; (1) single shale shaker, (1) single cone Swaco desander, (2) 10 h.p. electric mud agitators, (1) mud hopper, (1) 50 h.p. electric motor driving a 6 X 8" centrifugal pump for mixing mud. One 35 h.p. electric motor driving a 5 X 6" centrifugal pump for desanding.
(1) Wilson 600 duplex powered by 379 Cat, (1) Wilson 600 duplex powered by 3406E Cat w/6 speed manual transmission, 2 pit 800 bbl system w/ Brandt 4 x 5 dual shakers; (3) 10 hp elec. Mud agitators; (2) 5 x 6 centrifugal pumps w/50 hp elec. motors; (1) 6 x 8 centrifugal pump w/50 hp elec. Motor, (1) Swaco single cone desander, (1) mud hopper, and lights.
Drill pipe, collars and kelly, handling tools
(4) 8" drill collars with (2) handling subs
(18) 6" drill collars with (12) handling subs
6,000' (approx) 4 1/2" 16.60# grade E
(1) 40' 5 ¼" hex Kelly with, drive bushing, upper and lower kelly cocks.
(1) Foster 77 kelly spinner
(1) IDECO 150-ton swivel
(1) set 8" D.C. slips
(1) set 6" D.C. slips
(1) set 4-1/2" D.P. slips
(1) type C drill collar clamp
(1) set 4-1/2" bottle neck drill pipe elevators
(1) Pair type B rotary tongs W/ extra tong heads
(2) Type B rotary tongs
(1) 4-1/.2 in. elevators
(1) 4-1/2 in. slips
(1) 6 in. drill collar slips
(1) 8 in. drill collar slips
(2) 6 5/8 Reg. in. handling subs
(10) 6" drill collar handling subs
(1) set 6 ft. bails
(20) 6 in. drill collars w/4-1/2 XH connection
(4) 8 in. drill collars w/6-5/8 regular connection
6,600 ft. 4-1/2 in. XH drill pipe (20% of the pipe was inspected and it all came out double white band)
40 ft. 5-1/4 hex Kelly (looks new)
(1) Foster 77 kelly spinner
Pressure Control Equipment:
(1) 11" 3,000# Cameron SS double B.O.P. with blind, 4 1 /2 and 2 7/8" rams.
(1) 11" 3,000# G.K. hydril annular.
3,000# choke manifold with two manual chokes and 2" choke line.
Gas buster with burner and 6" burner lines.
(1) 11 in 3000# Shaffer LWS double dressed w/4 ½ & CSO rams; (1) 11 in. 3000# GK Hydril; 1 – 3000# choke manifold w/2 in. manual chokes; 1 gas buster; 1 gas burner w/6 in. lines
Other Miscellaneous Equipment
Telescoping doghouse plus 6,000 gallon diesel tank mounted on tandem trailer. Inside doghouse is knowledge box, drilling recorder, automatic driller, and two electric heaters.
13 ft. telescoping doghouse mounted on 48 ft trailer w/6000 gal. fuel tank; satellite automatic driller; 2 pen geograph recorder; 2 elec. heaters.
40' light plant house with (1) 125 kw Cummins powered generator,(1) 205 kw CAT powered generator. Also inside is one three station closing unit with 55-gallon accumulator equipped with electric duplex pump and a nitrogen back-up system.
45 ft. skid mounted light plant; (1) 150 kw Cat powered generator; (1) 205 kw Detroit powered generator; 3 station Koomey closing unit w/triplex pump (50 gal. reservoir) w/3 bottle nitrogen backup; 14 locker change room
30' change house with 12 lockers.
275 bbl. skid mounted frest water tank
350 bbl skid mounted brine tank
350 bbl round skid-mounted brine tank.
275 bbl round skid-mounted fresh water tank W/ circulating pump.
Electric Mathey wire line unit
Four sheave shorty combinations block hook combination, 1" drilling line.
Rig-Lite Lighting system
Handling Tools
(1) Mathey wire line unit
(2) collar tubs
(1) Combination catwalk/ collar tub w/ beaver slide.
(4) pipe tubs
(4) 30 ft. triangle pipe racks (2 sets of pipe racks; 4 individual runners)
(1) – 125 ton Gardner Denver swivel
(1) – 150 ton Web Wilson block hook combo
PRICE FOR EVERYTHING: $190,000
IDECO H-44C DRILLING RIG (Ref#13592N)
DERRICK & SUBSTRUCTURE
Ideco 108'/268,000# derrick with Crown-o-matic. Custom-built 300-ton integrally loaded substructure with 18'X21' floor. 14' Kelly bushing measurement with 10'10" clear height under rotary beams. Sub and wall section are unitized and mounted on wheels and axles, including hydraulic boom and pipe handling equipment. Substantially rebuilt in 2006.
DRAWWORKS
Ideco H-44 single drum. Powered by two 550 h.p. Cat C-15 diesel engines (new summer 2007) through an Allison 5860 5-speed automatic transmission with circulating brake flanges. Foster makeup and breakout cat heads. 22" single PArmac hydramatic brake. Gearmatic hydraulic pickup winches.
TRAVELING EQUIPMENT
Ideco UTB 160-ton unitized block/hook with four 36" sheaves for 1-1/8" lines. 2-3/4"X90" elevator links. Rebuilt 2006.
ROTATING EQUIPMENT
Ideco LR 20-1/2" rotary table with split master bushing. Ideco TL-200 swivel. Foster Model 77 kelly spinner. 4-1/4"X39' square Kelly. Varco 4-roller drive bushing. Rebuilt 2006.
MUD PUMPS
MD-8 triplex pump (PZ-8 equivalent) powered by Cummins KTA-38 1,000 h.p. diesel engine. Two Ideco MM550 7-1/4"X15" duplex pumps with forged steel fluid ends with quick change caps, Hydril K-20 pulsation dameners, Demco 2" shear relief valves, manifolded to compound. Each duplex pump powered by Cummins NT 855 670 h.p. diesel engine.
MUD SYSTEM
Two 225-bbl. steel pits with seven compartments, bypass trough and trip tank with top-mounted walkways. Harrisburg 10" single cone desander. Detroit Diesel-powered 5"X6" centrifugal pump with internal plumbing to charge either system. Derrick 500 gpm flow line shale shaker. 250-bbl. steel premix tank with 5"X6" 50 h.p. electric centrifugal pump.
WELL CONTROL EQUIPMENT
Cameron Type “U" 11" 5,000 psi double ram BOP (rebuilt 2007), Cameron Type “D" 11" 5,000 psi annular BOP rebuilt 2006). Koomey 3,000 psi 80-gal. accumulator with four stations and remote control. One 15 h.p. electric triplex and two air charge pumps with nitrogen back-up systems. 5,000 psi choke manifold.
GENERATORS
Cat 210 KW and Cat 200 KW, both new during spring 2007.
DOG HOUSE/FUEL TRAILER
8'X20' elevated dog house equipped with tool room & knowledge box. Bear automatic driller. 2,500-gal. fuel tank. 80-bbl. fresh water brake cooling and high pressure wash down tank.
MISC. EQUIPMENT
BJ Super Type “C" tongs w/ 3-1/2" thru 6" heads. Wooley Type “B" rotary tongs with 3-1/2" thru 13-3/8" heads. 500-bbl frac tank. Kelly saver sub, change over sub, ten 6" DC pick-up subs and two 8" pick-up subs. Two junk tubs.
CARRIER
Five-axle drive in carrier. Requires deadman anchors.
Rig was substantially rebuilt in 2006. In 2007 rig was repowered with (2) new Cat engines, equipped with two low time Cat generators and a new riplex mud pump. Since the addition of this new equipment, the rig has drilled a total of 2,192' in 48 hours trouble free. This is the only time on the new engines and the triplex. The new generators each have less than 400 total hours.
PRICE: $1,700,000
IDECO H37 WELL SERVICE RIG (Ref#1683RR) 103' x 244,000# franks telescoping hydraulically raised mast, Detroit Series 60 diesel engine, Allison 5860 transmission, mounted on 5 axle carrier, hyd leveling jacks, hyd utility hoist, air and hyd controls, front flotation tires Price: $245,000
IDECO (Shop Built) DIRECT OR REVERSE DRILLING RIG (Ref#11056Te) 86' x 240,000# telescoping mast, hydraulcally raised, cable scoped, double drum drawworks with twin dic air clutches, Tier 3 Cat C9 (350 hhp) engine (new 2008), Allison transmission (rebuilt 2008), auto catheads and hydraulic cylinder for make up and breakout, Hopper T drive and stub shaft dor drawworks and table drive, 27-1/2" rotary table mounted on detachable sub base, new change of direction box for table drive with rebuit spare box and gears, rig set up for 4-1/2" x 30' drill pipe, tongs, slip and dog collars, mounted on 3axle semi low boy chassis Price: $325,000
IDECO H-35 (Ref#713N) Manufactured 1988
Carrier: Tandem / Tandem, Recertified (Level 4) 2005, Detroit Diesel 8V-71 Approximately 500 Hrs on Inframe, Allison 5860 transmission, 42" X 10" H-35 Main Drum with Hydromatic, 38" X 8" Sandline Drum, Crown Saver
Mast: 104' x 220,000 #
Travel: Periods: 1, 2, 3, 4
BOP's: Class 3 - 5000# Working Pressure
Rig Pump: Skidded, Enclosed & Heated, 5" X 5" Triplex SJ 300, 5000# Working Pressure, Detroit Diesel 8V 71T Series 360 HP, Mounted Steam Heater
Rig Tank: Skidded, 30 M3, Trough, Degasser, Line Pipe 5000# Working Pressure
Junk Box: Skidded, 2400L Fuel Storage, Hydromatic Tank
Comb. Building: Skidded, Class 3 Accumulator, 60 KW Generator, Potty Change Room
Matting: 2 - 8' X 40' sheets with ramps, 2 - 8' X 15' sheets
Catwalk: 1 - 40' X 7'
Pipe Racks: 2 - Sets
Price on Request
IDECO H35 WORKOVER RIG (Ref#4370N) Double drum, 1” drill line, 9/16” sandline, 48” disk assist, 10” brake flanges, 96’ x 210,000@ Pemco hydraulically raised mast (new 2008), mounted on 4 axle carrier with 8V71N Detroit diesel engine (rebuilt), new rear suspension, new style 46 Eatons, 5860 Allison transmission, tools, Foster 58-93R tongs, Guiberson air slips, tubing and rod elevators, 2-3/8”, 2-7/8” , 5/8” and 1”, working everyday Price: $475,000
IDECO RAMBLER SERVICE RIG (Ref#11674Tc) 95' x 212,000# Ideco telescoping derrick, 42 x 10 double drum drawworks, 100 ton McKissick block and hook, hydromatic, tubing board, monkey board, catwalks, railings, stairs, lights, ladders, mounted on 4 axle carrier, Detroit 8V71 diesel engine, Alliston CLT 5860-DB automatic transmission Price: $137,500
IDECO H35 DOUBLE DRUM WORKOVER RIG (Ref#876N) 180,000 lb Derrick, Double Triple 96' Derrick, Double Drum Drawworks, 4 line speed block w/ swivel, Foster Tongs, Gyberson Double 3000# BOP, Oil Saver & Swabbing Equip., Rod & Tubing Elevators & Tools, 5500' of New 9/16" Swab Line, New 1" Drill Line (560'), New 5/8 Cat Line, New Tong & Rod Lift Line, New Tires, 8V71 Detroit, Transmission, Completely Rebuilt Schuller Front End, New Drive line from Front to Back & New Third Member & U-Joints, New Hydraulic Pump w/ Eaton Air Clutches, All new Brake Cans, New Rebuilt Tubing Board, New Battery, Starter & Gauges, Most air & hydraulic line has been replaced or updated PRICE: $500,000
IDECO H35 BACK IN WELL SERVICE RIG (Ref#8475R) Two available, Manufactured 1981, 4 axle, 95' x 212,000# scoping derrick, 60 Series Detroit diesel engine, Allison 5860 automatic transmission, Parkersburg 215 hydromatic brake, 150 ton 3-sheave McKissick traveling block Price: $675,000 each