November 13, 2024

BARGES FOR SALE

For additional information please contact Anthony Iorio at Tel (516) 536 7375 - rigs@sunmachinery.com

250' x 60' x 11’ CRANE BARGE WITH AMERICAN 9520 (220 ton capacity) CRANE (Ref#3651)

250’ x 60’ x 11’. GT 1694. Raked bow. American 9520 originally truck crane, now permanently mounted on the barge with steel support approx 5' high, 180' boom. (4) spud wells, (2) 26" spuds. Barge capacity 4000 tons. Air conditioned resting cabin and tool room. Located New Jersey Price: $600,000

195’ x 35’ FLAT DECK BARGE WITH BIN WALLS (Ref#4168a)

(4) available, 1600 ton, used as rock barges, built approx. 1975, used in fresh water for rip rock, good condition, decks show signs of wear, located Arkansas Price: $250,000 each Price for all 4 barges: $850,000

195’ x 35’ HOPPER BARGES (Ref#4196)

Three available, located in Louisiana Price: $250,000 each

136’ x 8’ x 7.5’ DOCK BARGE (Ref#4194d)

With spuds, located US East Coast Price: $70,000

120’ x 50’ x 10’ SPUD BARGE (Ref#4194b)

25” x 60’ spuds, located East Cost US Price: $225,000

120’ x 30’ x 7 BARGE WITH BIN WALLS (Ref#4190)

Built 1980, 4’ bin walls, spuds and spud wells, John Deere engine powers the spuds and 20’ hydraulic ramp. Currently in shipyard being sandblasted and painted, new lower chine knuckles on it Price: $210,00

90’ x 30’ x 10’ DOCK BARGE (Ref#4194c)

Located East Coast US Price: $110,000

90’ x 30’ x 4’ STEEL BARGE (Ref#4204a)

Built 2016, recently refurbished, repainted from top to bottom, located Northeast US Price: $370,000

86’ x 28’ x 6’ SPUD BARGE (Ref#4016)

Raked one end, 2 spuds powered by 4 cyl GM engine, large doghouse on the stern,approx. capacity 200 ton, 46 GT. Reworked in shipyard for COI, sides and bottom in good condition. Barge was no longer needed so they never applied for COI. Located Louisiana Price: $200,000

75’ x 26’ x 4’ FLAT DECK SPUD BARGE (Ref#4136b)

2 spuds, Detroit diesel to power spuds, located Midwest USA (excavator availble at extra cost) Price: $195,000

60’ x 28’ x 5’ BARGE (Ref#4189a)

Two 60’ x 14’ flat deck barges that connect together to make a 60’ x 28’, built 2012, connects together with 1-3/4” pins, fresh zincs, good paint, 6 tank barge (5 tanks excellent, 1 tank slight pitting), (2) 40’ x 10” dia spuds mechanically operated, holds in excess of 100,000 lbs, 6 new hatches, currently on small job in Connecticut, available for immediate sale Price: $135,000

60’ X 20’ X 6’ FLAT DECK BARGE (Ref#4194a)

Located East Coast US Price: $70,000

(2) 40’ x 16’ x 4’ SECTIONAL BARGES (Ref#3634b)

2 spuds (12” x 20’ each), pulling out of water and will be sandblasted and painted, located Alabama Price: $100,000 for both

40’ X 10’ X 5’ SECTIONAL BARGES (Ref#4180)

New Build, terms 50% deposit with order, completion time 4-6 weeks, Canada Price: $36,000 USD each
12” x 12” spud well $6,000 USD each, 12” x 12” spuds $130 USD per foot
Cost for new winch lifting system for 4 spuds $20,000

35’ x 12’6” x 42” SPUD BARGE (Ref#4195a)

Good condition, Located Texas Price: $50,000

35’ x 12’6” x 36” DECK BARGE (Ref#4195b)

A-frame (not shown in picture), good condition, located Texas Price: $50,000

(4) 30’ X 11’ X 4’ SECTIONAL STEEL BARGES (Ref#4138)

Pinned and bolted together to make 60’ x 22’, would be ideal to be used as a support barge, pile driving barge or dredge barge. It would not be economic to take apart and move from job to job. Could be transported on 4 trucks. Currently working. Price, in water: $45,000
Cannot be sold to Southeast Florida.